Time for me to upgrade ??

[lotsip]

Re: Time for me to upgrade ??

mine took 1.425 vcore, and 1.30vtt to get to 4.2ghz, had it there for a good 15months without any issue. I had a clarkdale on it, but lynfield will be the same I guess...

ok , thanks........ i reloaded optimal default setting in bios..........cuz i was all screwed up..and don't really know much.........haha...............then ran easy tune to try to get to 3.8.............windows booted............first thing i noticed is easy tune jacked my vcore up to 1.36 and vtt to 1.41............now to run some tests and see if its stable

[Acebmxer]

Re: Time for me to upgrade ??

If you still need help or still little confused with settings grab a template and post a full complete bios settings that you are currently using and we can look over and see that you might be missing or how to better advise you.

[lotsip]

Re: Time for me to upgrade ??

If you still need help or still little confused with settings grab a template and post a full complete bios settings that you are currently using and we can look over and see that you might be missing or how to better advise you.

yes, i will do that, thanks.............i have the template dl'd aready..........will fill it out and post it soon !

[lotsip]

Re: Time for me to upgrade ??

ok, overheating with ibt.............gonna reboot with yesterdays OC settings........(175x21=3.67, 175x8=1400 ram)......then i will post my bios settings template

[wazza300]

Re: Time for me to upgrade ??

for 3.8ghz i used a 21x180 bclk,8x mem multi,16x uncore freq,i left cpu voltage on normal no dvid left blank,set qpi/vtt to 1.3v

for 4.2ghz i used 200x21 bclk,cpu on normal voltage dvid to +0.0750v,10x mem multi 20x uncore freq,qpi/vtt set to 1.32v

[lotsip]

Re: Time for me to upgrade ??

for 3.8ghz i used a 21x180 bclk,8x mem multi,16x uncore freq,i left cpu voltage on normal no dvid left blank,set qpi/vtt to 1.3v

for 4.2ghz i used 200x21 bclk,cpu on normal voltage dvid to +0.0750v,10x mem multi 20x uncore freq,qpi/vtt set to 1.32v

ok, gonna try ur 3.8 settings............here are my 3.67 oc settings from yesterday.......seemed stable for the tests i did on them (prime, ibt, linx, and a couple others i forgot)


Advanced Frequency Settings:

CPU Clock Ratio 21x
cpu frequency 3.67ghz (175x21)

Advanced Core Features [Press Enter]:

Intel(R) Turbo Boost Tech................[Disabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[enabled]
CPU Enhanced Halt (C1E)..................[enabled]
C3/C6/C7 State Support...................[enabled]
CPU Thermal Monitor......................[enabled]
CPU EIST Function........................[enabled]
Bi-Directional PROCHOT...................[enabled]

QPI Clock Ratio..........................[x32]
QPI Link Speed........................5.6ghz
Uncore Clock Ratio....................18x
Uncore Frequency.........................3150MHz

>>>>> Standard Clock Control <<<<<

Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[175]
Extreme Memory Profile (X.M.P.)..........[profile1]
System Memory Multiplier (SPD)...........[8.0]
Memory Frequency (MHz)................1600 1400
PCI Express Frequency (MHz)..............[Auto]


>>>>> Advanced Clock Control <<<<<

CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps]

Advanced Memory Settings:

Extreme Memory Profile (X.M.P.)..........[profile1]
System Memory Multiplier (SPD)...........[8.0]
Memory Frequency (MHz)................1600 1400
Performance Enhance (SPD)............. [standard]
DRAM Timing Selectable (SPD)............ [Expert]
Profile DDR Voltage ..................1.65
Profile QPI Voltage ..................1.15
Channel Interleaving.....................6 [Auto]
Rank Interleaving........................4 [Auto]

>>>>> Channel A & B

Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[7]
tRCD....................................[7]
tRP.....................................[7]
tRAS...................................[21]

>>>>> Advanced Timing Control

tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 2 [auto]

>>>>> Misc Timing Control

B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]




Advanced Voltage Settings:

******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------

>>> CPU
Load Line Calibration...................[auto]
CPU Vcore..................1.14375v..[normal]
dynamic Vcore(dvid).......+0.00000v..[+0.04375v]
QPI/VTT Voltage..........1.100v.....[1.270v]

>>> MCH/ICH
PCH Core....................1.050v.....[Auto]
CPU PLL......................1.800v.....[Auto]

>>> DRAM
DRAM Voltage..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]


Miscellaneous Settings:[/SIZE]

Isochronous Support....................[Enabled]
Virtualisation technology..............[Enabled]
USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page

[lotsip]

Re: Time for me to upgrade ??

crashed, blue screen on windows boot, then rebooted.........

[wazza300]

Re: Time for me to upgrade ??

CPU Vcore..................1.14375v..[normal] if thats what normal uses then you have agood/low vid chip

try settings i gave you they should work

[lotsip]

Re: Time for me to upgrade ??

3.8ghz i used a 21x180 bclk,8x mem multi,16x uncore freq,i left cpu voltage on normal no dvid left blank,set qpi/vtt to 1.3v

blue screen crash on windows boot.............(i used your settings, cept for "16x uncore freq"......where is that ? is that the same as qpi clock ratio? ,my options for that are auto, x32 or x36, got the blue screen crash on x32 and on auto just now

[lotsip]

Re: Time for me to upgrade ??

changed vcore to normal, dvid +.0375, and windows booted.....will be testing now, i guess?

[wazza300]

Re: Time for me to upgrade ??

I don't think you can adjust uncore frequency on p55,or its limited,its different to qpi link speed,just tweak voltages if needed as every CPU will be different

My 920 stock normal voltage was 1.18750v,yours is lower so you would need to add a little in dvid for 3.8ghz,where I didn't have too

[lotsip]

Re: Time for me to upgrade ??

ok, wazza, i understand......i started prime95 , only to return from my short daily walk, to find prime stopped after a short time.....so, more dvid,?

[wazza300]

Re: Time for me to upgrade ??

yeah keep adding few more clicks

[lotsip]

Re: Time for me to upgrade ??

looks like i am good at 3.8ghz, just ran prime, ibt and linx with no errors......top temp was 70C (reached that only once briefly during ibt) max voltage reported by core temp during tests was 1.216

180x21=3.8ghz, vcore normal, dvid +.06250, memory=180x8=1440, 7-7-7-21, 1.65v

thanks guys ;)

[Darkje]

Re: Time for me to upgrade ??

nice one!

only coretemp displays vid, not vcore, it's not the same ... use cpu-z for the vcore, or someting else.