Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Why still no fix idle voltage?? only 1.64.0 works...
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse

Acebmxer
Gigabyte Elite
Last Activity: 12-23-2013, 11:21 AM
Joined: 05-14-2009
Location: New Jersey, United States
-
Re: Haswell Overclocking Guides / Results
so lower problem size ie not all memory tested higher gflops even with 100mhz slower.
Edit memory timings are different too.
Leave a comment:
-
Re: Haswell Overclocking Guides / Results
Stasio did not test all memory he only test 2560MB of ram hence the low problem size and each loop only took 18+ seconds. Still with my 8gb think 7gb test each loop lasted like 81 sec
Leave a comment:
-
Re: Haswell Overclocking Guides / Results
The people who think vcore is not dropping at idle either have power saving settings disabled or using wrong version of cpu-z. Has to be 1.64.0 to show idle voltage.
Leave a comment:
-
Re: Haswell Overclocking Guides / Results
Thanks Boondocks for posting the chart.
Just remember warranty and insurance are only good if cpu has not been delidded....
Leave a comment:
-
Re: Haswell Overclocking Guides / Results
You can try your same settings but test with this LinX 0.64.zip. This uses AVX instead of AVX2 which will not stress the cpu as hard which will be cooler and will require less volts.
AVX my cpu needs 1.210v for 4.5ghz and 1.330v...
Leave a comment:
-
Re: GA-Z87X-UD5H Z87 constantly rebooting after bios update failure
Have you trying to clear CMOS? Try to clear cmos via push button, with system powered off hold button for 10-20 sec. If you can get into the system I could recommend reflashing the bios from q-flash. It is highly recommend...
Leave a comment:
-
Re: Haswell Overclocking Guides / Results
Yes when testing with LinX you should have memory set to all to fully stress the system. I recommend 5-10 runs for short stability test and 15-20 runs for max stability.
As for max temp I would try to keep core temp to around 80c-90c....Last edited by Acebmxer; 09-02-2013, 12:35 PM.
Leave a comment:
-
Re: Haswell Overclocking Guides / Results
When Uncore is untuched = left at default 35x or 34x they should be considered Auto. If you want to disable Auto set uncore to 1 less or more then default, so if your default uncore is 35x (4770k) set to 34x or 36x. Default/Auto...Last edited by Acebmxer; 09-02-2013, 10:45 AM.
Leave a comment:
-
Re: GIGABYTE Latest Beta BIOS
You should ALWAYS use q-flash to update the bios except for when Gigabyte updates q-flash then you need to flash with @bios. IF and when you go to flash with @bios please make sure you download the latest version from here @BIOS (X79) v.2.23 B12.0217.1 for...
Leave a comment:
No activity results to display
Show More
Leave a comment: