If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
stasio, I'm hoping you can help me out. I just bought a P67A-UD7 (the original recalled board). I'm hoping to use BIOS from the -B3 revision or Z68. I read a lot of the XS Z68X/P67A-UD7 Club thread, but the B2 to B3 links aren't working (both 91.121.148.119 and myflare.com links ) and I'm not sure about the process.
<br>From what you posted, sounds like I must use @BIOS and not QFlash, set Optimized Defaults, Disable G and eSATA, untick Load CMOS Default and after I should reflash the backup with ALT+F12 and later clear the CMOS? (then update to ME Firmware 8.1.51.1471 )
<br>Could you please link the B2 to B3 BIOS (F3h right?) or whatever P67 or Z68 BIOS you recommend for overclocking/stability? Thanks for your time and any help you can provide.
"Any clues why this happens?"......you try to be hero.....
I posted earlier that fan speed are affected also.
So,now flash again non modded (original) BIOS with @BIOS or in DOS (not Q-Flash).
Check in BIOS if your fans works as set.
stasio, I'm hoping you can help me out. I just bought a P67A-UD7 (the original recalled board). I'm hoping to use BIOS from the -B3 revision or Z68. I read a lot of the XS Z68X/P67A-UD7 Club thread, but the B2 to B3 links aren't working (both 91.121.148.119 and myflare.com links ) and I'm not sure about the process.
<br>From what you posted, sounds like I must use @BIOS and not QFlash, set Optimized Defaults, Disable G and eSATA, untick Load CMOS Default and after I should reflash the backup with ALT+F12 and later clear the CMOS? (then update to ME Firmware 8.1.51.1471 )
<br>Could you please link the B2 to B3 BIOS (F3h right?) or whatever P67 or Z68 BIOS you recommend for overclocking/stability? Thanks for your time and any help you can provide.
So,which BIOS you want?.......Rev.B2=>B3......or B2=>Z68..?
-F11a - unlocked IVB multiplier but can't change BCLK
Try to flash ME Firmware 8.1.52.1496 ,so maybe can change BCLK.
(ME Firmware inside is 8.0.0.1351)
"Any clues why this happens?"......you try to be hero.....
I posted earlier that fan speed are affected also.
So,now flash again non modded (original) BIOS with @BIOS or in DOS (not Q-Flash).
Check in BIOS if your fans works as set.
Edit:
try to clear_CMOS.
So,which BIOS you want?.......Rev.B2=>B3......or B2=>Z68..?
-F11a - unlocked IVB multiplier but can't change BCLK
Try to flash ME Firmware 8.1.52.1496 ,so maybe can change BCLK.
(ME Firmware inside is 8.0.0.1351)
THANK YOU! :D works perfectly and I had been looking for this on my own for days with no luck xP much appreciated sir you are a gentleman and a scholar.
Wow, P67 to the latest Z68 in one flash Thanks so much. I'll flash it as soon as I get the board (its in the mail) and let you know how it does.
PS: Should I use qflash or @BIOS?
I have not yet seen any OC-Force updates for the 4790k micro code. I'm sitting on wanting to pre order but need certainty that if gigabyte doesn't get a z87 bios update out for it, that a modified one will appear to do it. If there is at least a modified bios for 4790k then I will pull trigger on pre order right away. I realize the intel faq pages do list the OC-Force but they also say F1 bios version and that's completely false.
Actually while on topic, It looks like the latest OC-Force modified bios is actually based on one of the F8's and not F9 or the newer F10a. probably could use a newer update anyways. :)
^This list of the boards,on INTEL page has been totally incorrect.
Gigabyte claim that Devil's Canyon 4690K are ready since BIOS F9: GIGABYTE TECHNOLOGY Socket 1150 - Intel Z87 - GA-Z87X-OC Force (rev. 1.x)
Still no 4790K on the list,but no difference with 4690K.
The problem is only new boards atm,which came with initial BIOS.
Ah I missed that one. didn't see it in first post. Well then I stand corrected there.
Curious about the devils cannon micrcodes on z87. I'm reading that even if DC works on z87, it won't be overclockable on z87, only z97. not sure how accurate that is.
Almost self defeating then since my 4770k is OC to about where DC is stock (not a golden egg, dang thing is 4.3 at 1.226 and becomes unstable at 4.4 no matter what i tried :( ).
GA-Z87X-UD4H BIOS F10a mod
Modified with :
Intel RAID for SATA 12.7.0.1936 to 13.1.0.2126
Intel EFI SataDriver 12.5.0.1815 to 13.1.0.2126
Intel Boot Agent GE 1.5.04 to 1.5.53
Intel GigabitLan X64 5.1.00 to 6.2.08
Marvell 88SE91xx Adapter 1.0.0.0034
Intel PCI Accelerated SVGA BIOS 2179
Intel GOPdriver 5.0.1036 to 5.0.1037
CPU Microcode Pack (with 06C319)
Modified splash logo 2
As always, use at your own risk. Thanks to SoniX for the UBU Tool.
Stasio,
Can you mod the GA-Z97X-UD5H BIOS F7 with latest?
I just switched back to your F7c mod because I cannot get sleep to work right with F7, so I am trying to find out why. (so far can't find any faulty drivers)
Also if possible, could you list "ingredients" also in the stock F7 BIOS?
Thanks & no rush, enjoy your weekend!
boon
Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Intel RAID for SATA 13.0.0.2075 to 13.1.0.2126
Intel EFI SataDriver 13.0.0.2075 to 13.1.0.2126
Intel PCI Accelerated SVGA 2179 to 2180
Intel GOPdriver 5.0.1037
Intel Boot Agent GE 1.5.04 to 1.5.53
Intel GigabitLan X64 5.1.00 to 6.2.08
Bigfoot PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
Marvell 88SE91xx/92xx Adapter 1.0.0.0034
EFI Marvell SATA 1.1.0.1007
CPU Microcode 06C319
ME firmware 9.1.0.1120 Modified splash logo 2
Note:
ME firmware 9.1.2.1010 flash yourself in Windows mode.
Comment