GIGABYTE Modified Bios

[stasio]

Re: GIGABYTE Modified Bios

^
GA-Z77M-D3H-MVP - F9a-mod

Modified with :

Intel Legacy RAID ROM 11.6.0.1702 to 13.1.0.2126
Intel UEFI SataDriver 11.6.0.1702 to 13.1.0.2126
Intel PCI Accelerated SVGA BIOS 2158 to 2170
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023 to 3.0.1027
Realtek PCIe GBE Controller 2.50 to 2.60 **
EFI Realtek UNDI 2.015 to 2.029 **
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
Sandy (06A7) CPU-MicroCode rev.28 to rev.29
Ivy E1(06A9) CPU-MicroCode rev.17 to rev.1B
MEI 8.1.30.1350 (Firmware)
Modified splash logo2

MEI 8.1.52.1496 (Firmware) update yourself in Windows mode.

Note**:Not used,but I updated.

[tim28taft]

Re: GIGABYTE Modified Bios

Thanks Stasio im going to have them SLIC it at the other forum then flash my brother's motherboard. I will report back thanks sooo much

[wheeljack12]

Re: GIGABYTE Modified Bios

Hey there Stasio. I know it was only a page or two ago. But could you mod the f6c beta bios for the z97x gaming gt. Please and Thanks.

[stasio]

Re: GIGABYTE Modified Bios

^
GA-Z97X-Gaming GT - F6c-mod

Consist of:

Intel RAID for SATA 13.0.0.2075 to 13.2.0.2134
Intel EFI SataDriver 13.0.0.2075 to 13.2.0.2134
Intel PCI Accelerated SVGA 2179 to 2180
EFI Intel GOPdriver Broadwell 5.5.1023
Bigfoot PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
Marvell 88SE91xx/92xx Adapter 1.0.0.0034
CPU Microcode 06C319 to 06C31C
ME firmware 9.1.0.1120
Modified splash logo 2

Note:
ME 9.1.10.1005 (Firmware) flash yourself in Windows mode.

[JayBass]

Re: Gigabyte Modified bios ga-x58a-ud3r_2.x_fh_MOD

X58A-UD3R Rev. 2.0 Bios FH MOD Complete
Updated with...
IRST 11.5.0.1582
Realteck 2.48
Jmicron 1.07.28
Marvell Bios Version 1.0.0.1033 / Firmware 2.2.0.1125
mb_bios_ga-x58a-ud3r_2.x_fh_MOD_Complete_8_2_12

Hi there, new to the forum.
My rig is setup as a 3D workstation for modeling and animation/video rendering. Main gfx car for OpenGL and Direct3D work and other two as added cuda rendering gpu's. So I don't use or require SLI.
I added 32 Gig of Corsair CMY32GX3M4A1600C9 and fitted the ram for tri channel config as depicted in the mobo manual. I also tried the dual channel config and had the same result.
The result was it being unable to post past initial bios load which is version FH, when adding two more Transend AXE ram 2200+ 2G sticks to fill all six slot it then posts fine and continues to boot.
Any ideas as to why this is?

I have the stock FH bios and was wondering if I flashed the above quoted bios to update my firmware on the various chipset components would it improve my stability in Windows 8.1 and its drivers that are more optimized toward the firmware version in your modded bios?

Any advice regarding my setup would be greatly appreciated.

[vailr]

Re: Gigabyte Modified bios ga-x58a-ud3r_2.x_fh_MOD

I added 32 Gig of Corsair CMY32GX3M4A1600C9 and fitted the ram for tri channel config as depicted in the mobo manual. I also tried the dual channel config and had the same result.
The result was it being unable to post past initial bios load which is version FH, when adding two more Transend AXE ram 2200+ 2G sticks to fill all six slot it then posts fine and continues to boot.
Any ideas as to why this is?

X58 boards require system memory using sets of three equal sizes. Such as: 3x 4Gb, and 3x 2Gb placed alternately in slots: 4+2+4+2+4+2=18 Gb (as an example). So: whatever combo is used, the total amount is going to be (should be) evenly divisible by 3.
32 is not evenly divisible by 3, thus your problem.
Do 8Gb sticks work on that board? If so: the maximum would be 6x 8Gb=48Gb; minimum: 3x 1Gb=3Gb.
These would work:
3x 1Gb=3Gb
3x 2Gb=6Gb
3x 2Gb + 3x 1Gb=9Gb
3x 2Gb + 3x 2Gb=12Gb
3x 4Gb=12Gb
3x 4Gb + 3x 1Gb=15Gb
etc.

[Luka45]

Re: GIGABYTE Modified Bios

is anyone modding the GA-Z87-HD3 F8 bios's?
got a GIGABYTE GA-Z87-HD3....would be nice to have it fully updated as well bios's?

[stasio]

Re: GIGABYTE Modified Bios

GA-Z87-HD3 - F8-mod

Modified with :

Intel Legacy RAID ROM 12.7.0.1936 to 13.2.0.2134
Intel UEFI SataDriver 12.5.0.1815 to 13.2.0.2134
Intel PCI Accelerated SVGA 2179 to 2180
Intel GOPdriver 5.0.1036 to 5.0.1037
Realtek PCIe GBE Controller 2.59 to 2.60
EFI Realtek UNDI 2.027 to 2.029
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6**
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5**
CPU Microcode 06C319 to 06C31C
ME firmware 9.0.30.1482
Modified splash logo 2

Note:
ME firmware 9.0.31.1487 flash yourself in Windows mode.

Note**:Not used,but I updated.

[p1um4]

Re: GIGABYTE Modified Bios

Hello, stasio!
Please, tell, for GA-Z77-D3H (REV 1.1) LATEST MODDED BIOS F23B? OR YOU HAVE F23MOD "NON-B"?
Send it please if you have.
Sorry for my english.
Many thanks!

[stasio]

Re: GIGABYTE Modified Bios

^
1 hour time...busy now....

Edit:

GA-Z77-D3H - F23-mod

Modified with :

Intel Legacy RAID for SATA 11.6.0.1702 to 13.1.0.2126
Intel UEFI RAID SataDriver 11.6.0.1702 to 13.1.0.2126
Intel PCI Accelerated SVGA BIOS 2158 to 2170
Intel Sandy GOPdriver 2.0.1023 to 2.0.1024
Intel Ivy GOPdriver 3.0.1023 to 3.0.1027
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
CPU MicroCode Pack Sandy 28 & Ivy 17 to Sandy 29 & Ivy 1B
ME Firmware 8.1.30.1350
Modified splash logo 2

MEI 8.1.52.1496 (Firmware) update yourself in Windows mode.

[p1um4]

Re: GIGABYTE Modified Bios

^
1 hour time...busy now....

Edit:

GA-Z77-D3H - F23-mod

Modified with :

Intel Legacy RAID for SATA 11.6.0.1702 to 13.1.0.2126
Intel UEFI RAID SataDriver 11.6.0.1702 to 13.1.0.2126
Intel PCI Accelerated SVGA BIOS 2158 to 2170
Intel Sandy GOPdriver 2.0.1023 to 2.0.1024
Intel Ivy GOPdriver 3.0.1023 to 3.0.1027
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
CPU MicroCode Pack Sandy 28 & Ivy 17 to Sandy 29 & Ivy 1B
ME Firmware 8.1.30.1350
Modified splash logo 2

MEI 8.1.52.1496 (Firmware) update yourself in Windows mode.

this is also for REV 1.1 ?

[stasio]

Re: GIGABYTE Modified Bios

Yup....

[Luka45]

Re: GIGABYTE Modified Bios

GA-Z87-HD3 - F8-mod

Modified with :

Intel Legacy RAID ROM 12.7.0.1936 to 13.2.0.2134
Intel UEFI SataDriver 12.5.0.1815 to 13.2.0.2134
Intel PCI Accelerated SVGA 2179 to 2180
Intel GOPdriver 5.0.1036 to 5.0.1037
Realtek PCIe GBE Controller 2.59 to 2.60
EFI Realtek UNDI 2.027 to 2.029
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6**
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5**
CPU Microcode 06C319 to 06C31C
ME firmware 9.0.30.1482
Modified splash logo 2

Note:
ME firmware 9.0.31.1487 flash yourself in Windows mode.

Note**:Not used,but I updated.

Thank you so much, working well...

[tim28taft]

Re: GIGABYTE Modified Bios

^
GA-Z77M-D3H-MVP - F9a-mod

Modified with :

Intel Legacy RAID ROM 11.6.0.1702 to 13.1.0.2126
Intel UEFI SataDriver 11.6.0.1702 to 13.1.0.2126
Intel PCI Accelerated SVGA BIOS 2158 to 2170
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023 to 3.0.1027
Realtek PCIe GBE Controller 2.50 to 2.60 **
EFI Realtek UNDI 2.015 to 2.029 **
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
Sandy (06A7) CPU-MicroCode rev.28 to rev.29
Ivy E1(06A9) CPU-MicroCode rev.17 to rev.1B
MEI 8.1.30.1350 (Firmware)
Modified splash logo2

MEI 8.1.52.1496 (Firmware) update yourself in Windows mode.

Note**:Not used,but I updated.

Works Perfectly thanks sooo much

[JakeChambers]

Re: GIGABYTE Modified Bios

Is it possible to mod the latest beta F6j for the Z97M-D3H?

My board has cold start issues, which are gone as soon as I set PCIE from 3.0 to 2.0 speed.
They also disappear when I set a BCLK lower than 100. But then my system hard reboots eventually after the first cold boot and resets my BIOS settings.
BCLK on Auto brings back the cold start issues.