GA-X58A-UD7 - * Official Thread *

[Duli]

Re: GA-X58A-UD7 - *Non-Official Thread*

Right now I'm using G.Skill Ripjaws RAM at 1600Mhz with 12GB and it works fine, I don't know why some people are having trouble with their board with all RAM slots filled. Most likely RAM issues or something.

Thank you for your reply.

I did test each individual Ram module and they are all good in my old mobo(Asus P6T SE), but when I put all 12GB in,and turn on my computer for the first time of the day, it boot up with 8GB of RAM at cold boot, if I cold boot again within 10 minutes it will show up all 12GB. The Intel specification says it only supports one module in each channel when use 1600 RAMs. I think that where the problem came from.

[Roadrunner CS]

Re: GA-X58A-UD7 - *Non-Official Thread*

a few w Q3QP 3.07 i7 Extreme 6 core







So far somewhat smooth

flawally90*TURNnBURN*T&B

[wazza300]

Re: GA-X58A-UD7 - *Non-Official Thread*

heres one for sale if you feel the need

Intel Core i7-980X EE ES Gulftown FREE SHIPPING NEW on eBay (end time 10-Feb-10 17:34:28 GMT)

[Roadrunner CS]

Re: GA-X58A-UD7 - *Non-Official Thread*

heres one for sale if you feel the need

Intel Core i7-980X EE ES Gulftown FREE SHIPPING NEW on eBay (end time 10-Feb-10 17:34:28 GMT)

You must be talking about this had it a while!!!




Great chips on SS!!

Roadrunner CS/flawally90/TURNnBURN/TURN&BURN

[wazza300]

Re: GA-X58A-UD7 - *Non-Official Thread*

nice if you have more money than sense

[Roadrunner CS]

Re: GA-X58A-UD7 - *Non-Official Thread*

nice if you have more money than sense

Whats the sense of it being there if you don't get to play with it?? All kidding aside been doing this a long time as a rouge, and know most all the regular Cookers. I enjoy having access to the latest and being able to post benching ect. for ppl that may have intrest in whats to come........

Been at this a long time and always enjoyed posting on and off just never joined any teams as I find simple is sometimes better.

I will post some runs on this chipper for any that have intrest, on simple SS.

RRCS/T&B

[k1llah3rtz]

Re: GA-X58A-UD7 - *Non-Official Thread*

cool.. nice to see my little thread getting some use :)..


This is my current issue thread http://forums.tweaktown.com/f69/x58a...-issues-36776/..

Problems with HDA header on UD7

[wazza300]

Re: GA-X58A-UD7 - *Non-Official Thread*

Whats the sense of it being there if you don't get to play with it?? All kidding aside been doing this a long time as a rouge, and know most all the regular Cookers. I enjoy having access to the latest and being able to post benching ect. for ppl that may have intrest in whats to come........

Been at this a long time and always enjoyed posting on and off just never joined any teams as I find simple is sometimes better.

I will post some runs on this chipper for any that have intrest, on simple SS.

RRCS/T&B

anychip will clock to 5-6ghz on liquid nitrogen,would have been nice to see some real world overclocks and temps with air and water

[Roadrunner CS]

Re: GA-X58A-UD7 - *Non-Official Thread*

anychip will clock to 5-6ghz on liquid nitrogen,would have been nice to see some real world overclocks and temps with air and water

Its on simple SS Vapor a step above good water in most cases , but I will be going to AIR with the chips as well sooner or later but I do enjoy having a bit better cooling for testing.

My SS is setup for 24/7 usage as any PC as well VS LN2 which is for one shot benching to the extreme including frying chips not my game.

Maybe in the next 2 weeks Ill get on AIR.

T&B

[HoofArted]

Re: GA-X58A-UD7 - *Non-Official Thread*

Hi guys

I am new here an this is my first post. I've got my system on ASUS P6T SE, but it boot up with 8GB of RAM at cold boot, if I cold boot again within 10 minutes, it will show up all 12GB. So I RMA it and my UD7 is on it's way.

Just wondering if anyone here using 12GB of 1600 RAM on this board?
my RAM is :
Corsair Dominator CMD12GX3M6A1600C8 - 12GB (6x2GB) DDR3 12800 (1600), CAS 8, XMP, DHX, Fan

I have a UD7 board, i7-920 and 12GB of Corsair RAM. I am experiencing the exact problem too. I have reseated my CPU & RAM and still, first cold boot of the day leaves me with 8GB @1066Mhz. A few warm boots and all is good. Any help would be appreciated.

Other than that, this system is stable with no issues.

[Xpoc]

Re: GA-X58A-UD7 - *Non-Official Thread*

Hey,
I'm planning on using this board in my next build, but see a lot of problems with people not being able to run their ram at spec.
I was going to get the Kingston HyperX T1 2000Mhz 6b kit, but not sure it's actually going to work on this board. Has anyone here been using that ram or do any of you know if it's going to give me problems?
Would I be just as well off with a good set of 1600mhz ram?

[supershanks]

Gigabyte GA-X58A-UD7 Living Review - Update

Gigabyte GA-X58A-UD7 Living Review - Update

A few recent updates to Gigabyte GA-X58A-UD7 Living Review:

1) Gigabyte GA-X58A-UD7 - The naked truth


2) Voltage Measuring Points


3) 4.4Ghz 21x210 Ram x8 1,680Mhz 7-7-7-19

[supershanks]

Re: GA-X58A-UD7 - *Non-Official Thread*

Hey,
I'm planning on using this board in my next build, but see a lot of problems with people not being able to run their ram at spec.
I was going to get the Kingston HyperX T1 2000Mhz 6b kit, but not sure it's actually going to work on this board. Has anyone here been using that ram or do any of you know if it's going to give me problems?
Would I be just as well off with a good set of 1600mhz ram?

You need to run with pretty high Vtt. The amount needed will vary with CPU. Depending what levels you need it might not be practical to run 24/7, but ok for bencjing.
A

good set of 1600mhz ram

will be cheaper, though there's nothing to stop you running a 2000Mhz 6b kit with tighter timimngs at 1600 or so.

[Xpoc]

Re: GA-X58A-UD7 - *Non-Official Thread*

Ok thanks, I will stick with the 2000mhz kit.
I ordered a Xeon W3520 for the processor just because everyones got the i7 920, but I see a few guys here have the Xeon as well. lol

[supershanks]

Re: GA-X58A-UD7 - *Non-Official Thread*

Think that's best choice re ram.
Be interested to see how that xeon runs , as you say there are a few running them.