GA-X58A-UD7 - * Official Thread *

[oc nub]

Re: GA-X58A-UD7 - *Non-Official Thread*

I haven't been able to get my Dominator gt 2000's to run 1900mhz on this board. I guess a newer bios will help.

[supershanks]

Re: GA-X58A-UD7 - *Non-Official Thread*

I haven't been able to get my Dominator gt 2000's to run 1900mhz on this board. I guess a newer bios will help.

Aye well at least i'm not alone, hope it's not long coming :)

[oc nub]

Re: GA-X58A-UD7 - *Non-Official Thread*

Ran some LinX at 4500mhz, temps are good considering the amount of vcore needed. It isn't a "golden" chip but I am having fun pushing it. This board seems to be very good, it recovers from failed oc attempts nicely, haven't needed to use the clear cmos button yet.

[wazza300]

Re: GA-X58A-UD7 - *Non-Official Thread*

thats alot of cpu vcore for 4.5ghz







this what i use for 4.5ghz

[oc nub]

Re: GA-X58A-UD7 - *Non-Official Thread*

@wazza: All chips aren't created equal. This is a high VID newer batch, temps are good. I will push higher.

[top game]

Re: GA-X58A-UD7 - *Non-Official Thread*

Ran some LinX at 4500mhz, temps are good considering the amount of vcore needed. It isn't a "golden" chip but I am having fun pushing it. This board seems to be very good, it recovers from failed oc attempts nicely, haven't needed to use the clear cmos button yet.

wow very nice oc. i need to see how much i can push my chip hevent had the time to do it. looks good..

[oc nub]

Re: GA-X58A-UD7 - *Non-Official Thread*

Thanks, I know the vcore is high but it is alot of fun to see how far you can push them, as long as temps hold up.

Good luck with your chip, post some results when you get time.

[supershanks]

Re: GA-X58A-UD7 - *Non-Official Thread*

I'm really liking this board, currently working on 4.4ghz 21x210 having got 4.2Ghz stable:-
Click pics for more benches and bios settings.
1) 4.2Ghz 21x200 Ram x8 1600Mhz 7-7-7-19


I got my ram running at it's stock speed 2,000mhz but it needed an extra 0.3vtt from 1.28v to 1.58v to be stable:
2) 4.2Ghz 21x200 Ram x10 2,000 9-9-9-27

[oc nub]

Re: GA-X58A-UD7 - *Non-Official Thread*

Very nice supershanks.
This platform is much harder than 1156 for mem.

[itman064]

Re: GA-X58A-UD7 - *Non-Official Thread*

Hi guys
I need help i have decided to try my first wc
i7
2xhd5870
antec1200
GA-X58-UD7

I have found this web PC Case Gear, Delivering quality computer parts Australia wide... and many more.

Can someone make me a list what i need for WC to dot from this web or another here in Australia. I know i can buy
Swiftech H20-220 Apex Ultima Liquid Cooling Kit but like i said i need down to last bolt money no obsticale and everything WC.

Thank you for your help guys

[oc nub]

Re: GA-X58A-UD7 - *Non-Official Thread*

This is close to what I am using, you prices are high there, wow. Others may have better options for you. You will also need distilled water and some type of algaecide. You will also need to try and measure what length of tubing you will need. 3 meters should be plenty if you take good measurements before cutting the tube. These parts I listed are for cooling the cpu only, not the nb. And of course you will need fans.

EK-Multioption Reservoir 150 Rev2 - $58.50 : PC Case Gear, Delivering quality computer parts Australia wide

XSPC RX360 Radiator - $115.00 : PC Case Gear, Delivering quality computer parts Australia wide

The Shopping Cart : PC Case Gear, Delivering quality computer parts Australia wide

x4---- Bitspower G1/4 Silver Diamond 1/2 High Flow Fitting - $3.50 : PC Case Gear, Delivering quality computer parts Australia wide

Swiftech Apogee XT CPU Waterblock - $99.00 : PC Case Gear, Delivering quality computer parts Australia wide

Optional but I used this fan box with a 120mm inside it for mounting the rad to the back of the case. http://www.sidewindercomputers.com/mciraho.html

Tygon 3603 Tubing 1/2 ID - $15.95 : PC Case Gear, Delivering quality computer parts Australia wide

x8---- Norma Hose Clamp - $2.50 : PC Case Gear, Delivering quality computer parts Australia wide

[ronpeck]

Linux and and this UD7 Board

Please is anyone running Linux on this Board..Having trouble myself and thinking I must be doing something wrong!!

[top game]

Re: GA-X58A-UD7 - *Non-Official Thread*

pulled out the 3941B chip and my new 3945A936 is a little better oc to 4.3 right off.

[supershanks]

Re: GA-X58A-UD7 - *Non-Official Thread*

Very nice supershanks.
This platform is much harder than 1156 for mem.

<!-- / message -->

Aye had forgotten that after been on P55 for a few months :lol:

[oc nub]

Re: GA-X58A-UD7 - *Non-Official Thread*

pulled out the 3941B chip and my new 3945A936 is a little better oc to 4.3 right off.

Very nice chip!

I will try your ET6 settings.

Looking at your et6, you are using LLC leve2 it seems? If so what is your load vcore, 1.376?