Re: Ga-ep45-ud3p + ocz 16gb ram
MCH 1.16 is for sure not enough. I use 1.24+ with only 4GB. I would be trying 1.24-1.34 and see if you have any luck that way, and more Vtt for sure as well.
If your ram is rated 1.9, that may be ok. But if not then it is not enough, either way I would use a little more. Like if it is 1.9V ram I would use 1.95-2.0
tRD is Static tRead Value, sorry for not saying! Set that to 10 or 12 for now
Like I said, I blame settings first and you have not been trying the correct ones loose enough or with enough voltage to start out with. So I still think as of now it is all in your settings.
You can contact Gigabyte here at the Tech Support link, sounds like you have already right? >>>
GIGABYTE - Support&Download - Technical Service Zone
MCH 1.16 is for sure not enough. I use 1.24+ with only 4GB. I would be trying 1.24-1.34 and see if you have any luck that way, and more Vtt for sure as well.
If your ram is rated 1.9, that may be ok. But if not then it is not enough, either way I would use a little more. Like if it is 1.9V ram I would use 1.95-2.0
tRD is Static tRead Value, sorry for not saying! Set that to 10 or 12 for now
Like I said, I blame settings first and you have not been trying the correct ones loose enough or with enough voltage to start out with. So I still think as of now it is all in your settings.
You can contact Gigabyte here at the Tech Support link, sounds like you have already right? >>>
GIGABYTE - Support&Download - Technical Service Zone
Comment