GIGABYTE Latest Beta BIOS

[gigaplex]

you have to set the RAM voltage to 1.35V, and you won't have any problems

XMP will usually increase the voltage to 1.35V.

[the_real_skar]

It's a well known Old School fact that having Spread Spectrum enabled cripples performance. When enabling XMP or any kind of overclocking then disabling Spread Spectrum is pretty much mandatory. Some things never change......

the odd thing is that i did not have this problem with older bios versions as far as i can recall. so i just tested F4 with the same settings (leaving spread spectrum enabled) and, lo and behold, not a single WHEA error.

[the_real_skar]

XMP will usually increase the voltage to 1.35V.

yeah, enabling the xmp profile automatically sets this voltage properly in my case. a manual setting wont make a difference.

[hsn]

I see on gigabyte website,that bios f13g is missing. Is this maybe bios f13 officiall is coming?

[lmarcelus]

F13i for B550 Pro AC on GB website.

1. Checksum : BDD6
2. Improve wireless BlueTooth compatibility
3. Update AMD AGESA ComboV2 1.2.0.1 PatchA
4. Fix L3 cache performance on Ryzen 5000 series processors
5. Fix USB 2.0 devices stability and compatibility

[flamey]

Any agesa 1.2.0.2 bios? MSI/Asus released a week ago...

[Cosimo Marilli]

yeah, enabling the xmp profile automatically sets this voltage properly in my case. a manual setting wont make a difference.

NO, in my X570 PRO F33G ... XMP sets the ram in the car to 1.25V, I suggest you check it better

[slikvik]

Hey. I was waiting for B550I AORUS PRO AX - F13f (March) to move to a full blown F13 on Gigabyte's site, but instead it's been removed and is now back to an old F12 from January. Are idea why they've done this?

[toss3]

F13h seems to be up on Gigabyte's servers for the B550i Aorus Pro AX (just copy the download link and change the filename so f13h).

[Arm]

Hey there, any beta BIOS for the B560M AORUS PRO AX or a later than the one listed for the Z590 AORUS MASTER?

High frequency RAM OC on gear 2 is really poor compared to the competition, especially (but not limited to) the Master when using (DR) DJR.

[VimesUK]

FYI Using the latest BETA for the gigabyte Master Z390 board, F11o......

Not all the time but on occasion it fail to boot and instead offer a black screen with five beeps from the speaker.
This is totally related to enabling Above 4G decoding and then Using the Resizable BAR option.
All is good with CSM disabled and all of my drives are formatted with GPT and not MBR.
As noted this is not happening all of the time.
A power off and reboot has, so far, resolved the issue.
The PC then POST's and boots fine with BAR support working.

Just to add to the above....

The same applies to the latest official release BIOS as well. F11n.

Sadly you need to disable CSM within the BIOS but only IF you have a NVidia card with BAR enabled. When I tested a AMD card then CSM could remain enabled and all seemed well with the boot. As noted all of my drives have been GPT enabled for years and the five beeps is prior to completing POST.
With CSM back enabled and thus BAR disabled for an Nvidia card then all is fine.

With everything enabled as it needs to be an an Nvidia card used then more often than not it will fail to POST and five beeps are heard.
Zero overclocking and all BIOS defaults otherwise.

[stasio]

New BIOS....

Z590 BIOS updated to Beta "d", on first page.

Z490 BIOS updated to F20, on first page.

B550 BIOS is coming to GB web page ( not all range)

TRX40 BIOS on GB web page.

Note:

Any agesa 1.2.0.2 bios? MSI/Asus released a week ago...

GB is probably skipping Agesa 1.2.0.2 and instead new release with Agesa 1.2.0.3 ( AMD recommendation) will be arround end of month.

[maceh]

New BIOS....

Z590 BIOS updated to Beta "d", on first page.

Z490 BIOS updated to F20, on first page.

B550 BIOS is coming to GB web page ( not all range)

TRX40 BIOS on GB web page.

Note:



GB is probably skipping Agesa 1.2.0.2 and instead new release with Agesa 1.2.0.3 ( AMD recommendation) will be arround end of month.

For when next stable for x570 aorus series??????????

[gigaplex]

NO, in my X570 PRO F33G ... XMP sets the ram in the car to 1.25V, I suggest you check it better

It'll set it based on what the XMP profile calls for. My RAM specifies 1.35V in the profile and my motherboard respects that. You haven't mentioned what RAM you're using when it gets it wrong.

[dr__atomic]

Hello, is something knonw about issues with B550M and Ryzen 5 PRO 4650G? For me F11, F12 and F13 do not work, only F1 and F2 works with this CPU (I created a separate topic, but I do not konw if this belongs here or it can stay as a separate post -- I cannot edit nor tag my posts, probably because this was my first one :))