GIGABYTE Latest Beta BIOS

[boXerrumble]

Whoa I had Bluetooth drop a few times today (running f13h on b550i auros pro ax) and had the device connect / disconnect Windows chime sound a few times. I checked Device Manager in Windows and there were HEAPS of devices listed as failed however a few seconds later it fixed itself and bluetooth was good again. So an improvement at least!

You need to download the latest Intel AX200 Wifi and Bluetooth drivers. F13h alone will not resolve the issue completely.

[baldersz]

You need to download the latest Intel AX200 Wifi and Bluetooth drivers. F13h alone will not resolve the issue completely.

Yep already running the latest drivers from Intel!

[RoyFJ]

You need to download the latest Intel AX200 Wifi and Bluetooth drivers. F13h alone will not resolve the issue completely.

I thought AORUS Pro has the Intel AC3168 BT and WLAN module.

[boXerrumble]

I thought AORUS Pro has the Intel AC3168 BT and WLAN module.

Idk what the Aorus Pro has, but the poster I was responding to has the B550i board which I have. That has the AX200 BT and WiFi.

[MykelNeiD]

Hm I am occasionally seeing the VGA error LED lighting up after a cold boot on my X570 Arous Pro ,running 33g with a MSI 3080 Gaming X Trio on the latest re-bar Bios 94.02.42.00.FB, rebooting resolves it. Anybody else?

[LUiooo]

Hm I am occasionally seeing the VGA error LED lighting up after a cold boot on my X570 Arous Pro ,running 33g with a MSI 3080 Gaming X Trio on the latest re-bar Bios 94.02.42.00.FB, rebooting resolves it. Anybody else?

That is interessting! Nearly the same problem - and also today! I also have a MSI 3080 Gaming X Trio on a Aorus B550 Pro V2 (F13g). One hour ago my system crashed (black screen) and didn't boot anymore (VGA LED on mainboard). Now I'm running an old Radeon HD4890 and everything works again.

Is it something with the MSI card/BIOS/ReBar?

[MykelNeiD]

Idk as i have no further insight about the VBios,other than that my system runs perfectly fine

[jwsg]

Thanks for updates about BIOS F13h and the BT Module and ITE device - I'm not quite ready to update as I'm OK with a USB BT dongle for now.

New drivers arent always made available by Windows Update and the GB site is also out of date. From https://downloadcenter.intel.com/pro...-Wi-Fi-6-AX200 22.40 is the latest version. Perhaps it was 22.20 that also helped as that release mentioned "Bluetooth device may show a yellow bang in Device Manager after resuming from Hibernation mode".

[playg]

Something wrong with latest bios for B550 aorus pro AC
look at l3 cache delay it should be not bigger than 10
stock, overclocked, doesnt matter, those numbers jumps between 15-40

[playg]

nevermind, i tried all bioses from GB website, and received same result. The latest action i did is windows update to developer preview build 21359

[Byren]

I'm using a B550 VISION D with a 5900x installed, and like many of you I've been having problems with my Bluetooth disappearing. After updating to the new BIOS yesterday I haven't had any issues with bluetooth (which equates to about 15 or 16 hours of active use with the updated BIOS at this point)

Sods law that I had only just bought a bluetooth dongle as a replacement!

[savawav314]

There is a small typo in latest Gigabyte UEFI for the Aorus Pro V2 F13g.
It's in the SPD Info menu from Tweaker where it says Proflie instead of Profile..

[encrypted11]

stasio

Pretty sure there’s some serious issue with F5c and F5d BIOS in the memory overclocking section.

I’ve attempted to port over some settings that worked with google stressapptest with the frequencies reduced

(4533 C18 Google Stressapptest 1Hr stable to 4266MHz)

The combination of the following settings seem to brick the board entirely, to the extent that flashback doesn’t respond either.

The other config I’ve changed are just fan curve and power limits. These had no ill effect on the board.

The moment I used this preset (as the memory was unstable at known good voltages on a Z590U STRIX), the board has no power, and flashback doesn’t respond with LEDs as well. 2 Z590I VISION Ds have died the same exact way.

The problem:
Memory Training algorithm: High Density

My other related voltages were:
1.52V DIMM
1.22V VCCIO2(IMC)
SA 1.17

Core voltages were on auto PL1 119W PL2 95W.
CPU was underclocked purely via lowering the per core multipliers.

[Mikhail Antonov]

Hello dear forum and Gigabyte company, please tell me or provide the most stable BIOS version for the z390 gaming x motherboard. Now version 10i. And how to flash it correctly? Please tell me in the system there is a m2 disk and an ordinary ssd, and so the system constantly prioritizes ordinary ssd why?

[Tantawi]

nevermind, i tried all bioses from GB website, and received same result. The latest action i did is windows update to developer preview build 21359

That is the problem, please upvote feedbacks in the feedback hub about it so MS will know. Just search for L3 and you will see at least 3 reports with same problem in Windows Insider.