GIGABYTE Latest Beta BIOS

[Jesdga95]

Anyone else having issues with PBO running Adobe Lightroom? Everything else seems to work fine but my PC crashes randomly when using Lightroom with PBO enabled. My settings are 300, 230, 230, CO -10, 100MHz

[Dr.rafi]

New to the forum. 5950x + Aorus X570i and 3600 MHz RAM

Bios version F31J seems to be stable, L version wouldn't let me go above 3200 MHz without BSODs and restarts. However I'm still unable to run my CPU with PBO enabled (instant reboot when running any kind of heavy load) and I'm getting low cinebench scores (9500ish). I'm also seeing that one CCD is MUCH hotter than the other one (by like 15+ degrees) at times, mostly on games. Temps are very close on both CCDs when running benchmarks. Already re-applied thermal paste and it didn't seem to help:

CCD1 have the fastest Cores and is used mainly in games and less demanded thread applications.

[nazme06]

something annoying, with each installation of bios, my graphics card mounted on a riser is no longer recognized, forced to dismantle, forced the pcie gen3 then reassemble.

[Wechhe]

Question regarding the SOC voltage:

I have a 5900x on a x570 Master with F31o Bios. All on default except XMP profile for RAM, CSM off and Infinity Fabric to 1800 MHz (to match 3600 RAM).

My temperatures are noticibly higher than with my 1700x (Noctua DH-15).
In Ryzen Master it says "CDDCR-SOC 1.2" and with HWInfo I see SoC Voltages 1.175-1.181 Volt. "
Isn't that a bit high?
VCore for CPU is arount 1.43 - 1.5V which I think is also really high....

Is that connected to any (default) settings in the F31o Bios? Or normal for the 5900x ?

[g111]

I'm getting a complete fclck wall at 1900. I can get stable RAM at 1900 and fclck at 1876 all on auto voltages on an overnight Prime95 test, but bumping to 1900 fclock just won't POST (black screen before BIOS splash screen even loads) even if I manually set soc vcore from 950mv to ~1.16V, and VDDP and VDDG also from ranges of 900mv to 1.1V. f11n did allow me to go higher but this is the wall right now. Are there any other bios adjustments I can try making that may allow a higher fclock?

[stasio]

First post on this forum... :)

BIOS F31o on Aorus Ultra does not seem to honor the PCIe Gen setting.

Latest F31o and F11n coming slowly on GB web page.

[rehsd]

Latest F31o and F11n coming slowly on GB web page.

Is the F31o coming to the Gigabyte page slightly different, or the same F31o from this forum? I assume the same. I'll need to wait for the next version so that I can keep PCIe at 3.0 (AMD PCIe 4.0 USB issues).

[g111]

is it the exact same file as the betas shared here previously?

[Satzman]

stasio x570 Aorus Pro F31o, I confirmed that when playing COD MW with 2x different Logitech g304/g305 mouse plugged into the USB 2.0 ports, they randomly become unresponsive for 1-2seconds.
Plugging them into the USB 3.0 ports resolves it. My keyboard on the USB 2.0 ports is fine - just the mouse.
It's funny because this don't notice it happen on desktop, but I can replicate it 100% while playing COD MW multiplayer when this mouse is connected to the USB 2.0 ports.
Can anyone else with a g304/g305 mouse confirm this?

CPU: 5800x
Mobo: x570 Aorus Pro Rev 1.2 @ F31o
Ram: G.Skill 3600 c16 @ 3600 c16 XMP @ 1800IF
Gpu: MSI RTX 3080 Gaming X Trio

[Neovalen]

I'm getting a complete fclck wall at 1900. I can get stable RAM at 1900 and fclck at 1876 all on auto voltages on an overnight Prime95 test, but bumping to 1900 fclock just won't POST (black screen before BIOS splash screen even loads) even if I manually set soc vcore from 950mv to ~1.16V, and VDDP and VDDG also from ranges of 900mv to 1.1V. f11n did allow me to go higher but this is the wall right now. Are there any other bios adjustments I can try making that may allow a higher fclock?

I'm in the same boat. Can run 1876 all day without errors but 1900 doesn't post no matter what I do on F31o on my X570 Aorus Master. The only other issue I am having with this board is the cold start issue which I believe is fairly common knowledge... I can only use sleep mode, doing a shutdown and cold boot results in no post and needing to clear CMOS to recover. Wish I knew about it before buying the board and assembly... anyone have a real solution for that one or things to try? (CSM already disabled)

My previous board was also a Gigabyte and rock solid (Z390 Aorus Master) so I was hoping to get the same coming here to AMD.

[g111]

I'm in the same boat. Can run 1876 all day without errors but 1900 doesn't post no matter what I do on F31o on my X570 Aorus Master. The only other issue I am having with this board is the cold start issue which I believe is fairly common knowledge... I can only use sleep mode, doing a shutdown and cold boot results in no post and needing to clear CMOS to recover. Wish I knew about it before buying the board and assembly... anyone have a real solution for that one or things to try? (CSM already disabled)

My previous board was also a Gigabyte and rock solid (Z390 Aorus Master) so I was hoping to get the same coming here to AMD.

I wouldn't dismiss it as a board problem right away. I have read this RAM/fclock issue of users having trouble going above 3600 from many users on different board brands but all are on ryzen 5000 series cpus. I think the BIOS makers are still tweaking things to work right (and as we can see by the frequent beta releases).

Curious why you mentioned CSM disabling - does that play a role in RAM and/or IF OC?

------

minor rant but the biggest beef I have with my BIOS is the duplicate menus all over the BIOS for various things. But especially the RAM OC and also different voltages menu entries are duplicated in various places and the worst thing is they don't sync - i.e if you change timings in one of those menus, they don't show up in the other menus. It feels like they threw the BIOS together and forgot where they put different entries over time, and just never bothered to tidy it up after...
Is this common to all Gigabyte boards?

[g111]

I'm in the same boat. Can run 1876 all day without errors but 1900 doesn't post no matter what I do on F31o on my X570 Aorus Master. The only other issue I am having with this board is the cold start issue which I believe is fairly common knowledge... I can only use sleep mode, doing a shutdown and cold boot results in no post and needing to clear CMOS to recover. Wish I knew about it before buying the board and assembly... anyone have a real solution for that one or things to try? (CSM already disabled)

My previous board was also a Gigabyte and rock solid (Z390 Aorus Master) so I was hoping to get the same coming here to AMD.

I wrote a reply to you but it won't post for some reason(says needs approval? not sure why)

The gist was don't worry about it yet, that I've seen reports from other board users with similar issues on ryzen 5000 series having trouble booting with RAM/fclock above 3600. We're not alone. I think that's why we're getting so many beta BIOSes right now - they're still hammering things out.

Why did you mention disabling CSM? Does it have something to do with IF or RAM OC?

[Jason_Cruze]

New to the forum. 5950x + Aorus X570i and 3600 MHz RAM

Bios version F31J seems to be stable, L version wouldn't let me go above 3200 MHz without BSODs and restarts. However I'm still unable to run my CPU with PBO enabled (instant reboot when running any kind of heavy load) and I'm getting low cinebench scores (9500ish). I'm also seeing that one CCD is MUCH hotter than the other one (by like 15+ degrees) at times, mostly on games. Temps are very close on both CCDs when running benchmarks. Already re-applied thermal paste and it didn't seem to help:

I'm getting to 80c in my 5600x under custom open loop when using R20, Reapplied thermal paste still the same scenario. I think that is how Ryzen behaves under PBO, it pushes the volts too much until the temps of the CPU is nearly at the limit to achieve maximum performance.

[Neovalen]

I wrote a reply to you but it won't post for some reason(says needs approval? not sure why)

The gist was don't worry about it yet, that I've seen reports from other board users with similar issues on ryzen 5000 series having trouble booting with RAM/fclock above 3600. We're not alone. I think that's why we're getting so many beta BIOSes right now - they're still hammering things out.

Why did you mention disabling CSM? Does it have something to do with IF or RAM OC?

That part was more about the cold boot issue.

[Satzman]

stasio x570 Aorus Pro F31o, I confirmed that when playing COD MW with 2x different Logitech g304/g305 mouse plugged into the USB 2.0 ports, they randomly become unresponsive for 1-2seconds.
Plugging them into the USB 3.0 ports resolves it. My keyboard on the USB 2.0 ports is fine - just the mouse.
It's funny because this don't notice it happen on desktop, but I can replicate it 100% while playing COD MW multiplayer when this mouse is connected to the USB 2.0 ports.
Can anyone else with a g304/g305 mouse confirm this?

CPU: 5800x
Mobo: x570 Aorus Pro Rev 1.2 @ F31o
Ram: G.Skill 3600 c16 @ 3600 c16 XMP @ 1800IF
Gpu: MSI RTX 3080 Gaming X Trio