GIGABYTE Latest Beta BIOS

[ktanggu]

X570 Aorus Elite F31o can't booting IF 2000 RAM 4000. is it blocked? Why?
So, i turn back F31k to using IF2000 RAM 4000. It still showing WHEA Error , But no lag, no freezing.
5600X 4.75GHz @ 1.38v , Patriot VIPER STEEL 4400C19 Series 8GB x2 @ 4000 CL16 , ASUS RTX2060 6GB

[mgfirewater]

stasio x570 Aorus Pro F31o, I confirmed that when playing COD MW with 2x different Logitech g304/g305 mouse plugged into the USB 2.0 ports, they randomly become unresponsive for 1-2seconds.
Plugging them into the USB 3.0 ports resolves it. My keyboard on the USB 2.0 ports is fine - just the mouse.
It's funny because this don't notice it happen on desktop, but I can replicate it 100% while playing COD MW multiplayer when this mouse is connected to the USB 2.0 ports.
Can anyone else with a g304/g305 mouse confirm this?

CPU: 5800x
Mobo: x570 Aorus Pro Rev 1.2 @ F31o
Ram: G.Skill 3600 c16 @ 3600 c16 XMP @ 1800IF
Gpu: MSI RTX 3080 Gaming X Trio

Before f11k a had such huge stuttering USB mouse and keyboard. That's i started a rma.

Microscoft releasethis week an optional update for disconnection on usb 3 hubs. Before I can't used my mouse (cabel) and keyboard (2,4ghz) on the Hub of my philips 4k Monitor.

Now everything is fine.

[g111]

stasio x570 Aorus Pro F31o, I confirmed that when playing COD MW with 2x different Logitech g304/g305 mouse plugged into the USB 2.0 ports, they randomly become unresponsive for 1-2seconds.
Plugging them into the USB 3.0 ports resolves it. My keyboard on the USB 2.0 ports is fine - just the mouse.
It's funny because this don't notice it happen on desktop, but I can replicate it 100% while playing COD MW multiplayer when this mouse is connected to the USB 2.0 ports.
Can anyone else with a g304/g305 mouse confirm this?

CPU: 5800x
Mobo: x570 Aorus Pro Rev 1.2 @ F31o
Ram: G.Skill 3600 c16 @ 3600 c16 XMP @ 1800IF
Gpu: MSI RTX 3080 Gaming X Trio

I have same issue with my keyboard (not Logitech). It also happens in desktop and even in BIOS. It sometimes disconnects for 1-2 seconds and reconnects. Almost unnoticeable. But my B550i Aorus Pro AX only has USB 3.2 on the back and they all do it. Mouse doesn't seem to have this problem...

[rehsd]

Two things to try: 1) Set Global C-State to disabled in BIOS. If that doesn't work, 2) Set PCIe to Gen 3.0 in BIOS.

[stasio]

is it the exact same file as the betas shared here previously?

100% same....SHA-1.
Now you can download....instead of F30 dl link, retype to F31o (some servers already got...ie...EU,A/ME).

[Satzman]

Two things to try: 1) Set Global C-State to disabled in BIOS. If that doesn't work, 2) Set PCIe to Gen 3.0 in BIOS.

I tried the fix from Buildzoid's post on reddit regarding the USB 2.0 ports hitching where you disable global C-States, doesn't work for me, only fix for me is to use the USB 3.0 ports. Using the 2.0 ports makes the mouse super hitchy while playing MW.

[Deepcuts]

stasio what is your take on Ryzen 5950X rebooting and crashing with Gigabyte boards at default settings, without XMP?
CPU defect and we should just RMA, or there is a chance a future BIOS version might fix it?
Thank you.

[mgfirewater]

one question: my system has a better cpu scores in cinebench r23.200 with the default setting & xmp3200 instead of with ram oc.

the default xmp3200 setting goes high to 15519pt (multi) and 1552 (single)

with this ram setting

i got "only" 15440pt and 1527.

i know something about measurement inaccuracy, but the average of runs show the same. about -75 points in multi and -25 in single.

[g111]

Is it prime95 stable? Lower scores can mean instability/too high OC/too low volts

[mgfirewater]

Yeah stable. Trc 56 was instable. I believe that the thermal lock come easier with a higher flck.

[tsamolotoff]

stasio Thanks for your work, can you please relay this to GBT engineers? On x470 gaming 7 if CCX OC is enabled, system cannot cold boot if certain voltages are set (it boots up to "press del to enter bios, after which it hangs indefinitely with 02 or D2 POST-code). It seems like there's an even-odd type of problem - it works just fine if Vcore is set to 1.35V, but it does not start if it's set to 1.343V (a 0.0625 step lower). In the same vein, 1.356V does not work, while 1.362V does, and so on. Any voltage works fine with all-core OC, but somehow it does not work with CCX OC enabled. Tested this behaviour on all bioses that have CCX OC starting from early betas of F50 and ending with F60c.

[bovcan]

well, F32n is another story. on F32l vcore in bios didnt have effect, now it does BUT on F32l I could run 101mhz, 102mhz bus clock, now I cant run at even 101MHZ. I just get BDOS before enetering Windows.
HWinfo still show 99MhZ bus clock with SVM enable...

wierd, the first time vcore was working now it isnt. I tried to lower it in bios, to 1.28v and in windows I got dynamic vcore. Working only If I set it in SIV.
edit: F31n

[RoyFJ]

I have the B550 AORUS Pro AC Wifi. From day one I suffered with stuttering erratic keyboard behavior especially when my MS Ergonomic keyboard would be connected to USB 2 ports, the issue would improve if I connected it to USB 3 but still it remained erratic. This also occurred with wired keyboards so it was not a wireless issue. The recent F11K BIOS that I was able to flash before Gigabyte mysteriously pulled it from their website seems to have fixed this issue but I still use my keyboard on USB 3 while my wireless Logitech mouse remains connected to USB2. The BIOS is in default setting with no PBO nor any form of overclock.

Before the BIOS update I had to turn off CSM and XHCI Hands off in BIOS to get the keyboard functioning and I still have them off. Rest of my system is with 32GB RAM, Ryzen 9 3900 and ATI Radeon RX570 8GB card with nvme SSD connected to the m1 slot. Its strange that Gigabyte pulled off the BIOS from their website.

[stasio]

stasio Thanks for your work, can you please relay this to GBT engineers? On x470 gaming 7 if CCX OC is enabled, system cannot cold boot if certain voltages are set (it boots up to "press del to enter bios, after which it hangs indefinitely with 02 or D2 POST-code). It seems like there's an even-odd type of problem - it works just fine if Vcore is set to 1.35V, but it does not start if it's set to 1.343V (a 0.0625 step lower). In the same vein, 1.356V does not work, while 1.362V does, and so on. Any voltage works fine with all-core OC, but somehow it does not work with CCX OC enabled. Tested this behaviour on all bioses that have CCX OC starting from early betas of F50 and ending with F60c.

On page #821 you have F60d BIOS.

[rehsd]

Re. F31o and it not honoring the PCIe Gen setting... I put an older BIOS on, did a cold boot, put F31o back on, and the PCIe Gen setting is working. Odd.