It is indeed surprising that it takes so long to get a new version online. More than 2 months since the last beta F36e for the Master...
Does anyone know why the delay?

I recently updated from F31o to F34 on my x570 Master 1.2 and I observe lower boost clocks on my 5900x - everything on Auto / Stock.
Every core clocks about 50 MHz lower than before.
Did someone observe similar behaviour?...

Does anyone know the roadmap for the next weeks in terms of further AGESA versions by AMD and when Gigabyte will release a final UEFI Version for the x570 boards?

Just a wild guess, but they recommend to use a newer UEFI version.

If that actually solves your problem or if it was just a generic response - I do not know.

--> Did you try a newer or a different UEFI version?

It is a bit weird that Asrock, MSI and ASUS are releasing AGESA 1.1.9.0 FINAL while Gigabyte is still struggling with BETA versions for AGESA 1.1.0.0...

I have a x570 Master and only a 5900x CPU, so I had to update the Bios on the factory-new Board using the Flashback method without CPU, RAM and GPU installed - because the factory BIOS version does not work with 5000 CPUs.

1) Can I do the upgrade using the Flashback Button also with CPU,...

Question regarding the SOC voltage:

I have a 5900x on a x570 Master with F31o Bios. All on default except XMP profile for RAM, CSM off and Infinity Fabric to 1800 MHz (to match 3600 RAM).

My temperatures are noticibly higher than with my 1700x (Noctua DH-15).
In Ryzen...

I have x570 Master, a 5900x and 2x32 GB Ballistix 3600 CL 16 (Micron-B) to build my new system today.

After reading about so many problems - what is your suggestion to start with:

1) Which UEFI version for stability
2) Which settings in the UEFI (if possible with RAM=...

Which Board, UEFI Version, CPU (+settings) and RAM(+settings) are you using again?...

Is there a difference for the Bios versions for the different revisions of one board?
There is only one version linked here for each board.
I have a x570 Aorus Master rev 1.2 --> Can I use the same UEFI as for rev 1.0 and rev 1.1?

And another short question: What means "ABL"...