If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
... About F16c... support of my Crucial at stock speed (933MHz CAS9)... I need a few weeks before entering.
No need to wait a few weeks : 1 crash of Firefox yesterday and 1 BSOD moving my mouse this morning... so Crucials returned in their slippers at 800MHz CAS8.
I tried GA-Z77X-UD5H (Rev.1.1)- F16c-mod1 but unfortunately it did not work for me. System would not POST (no video or access to BIOS). On-board debug had error code '62'. Had to restore main bios from backup as could not access system any other way.
Initially I thought @BIOS was at fault and so tried QFLASH with the same result.
Am now running F16c without mod's and (so far) no issues.
I have not tried the previous mod version (GA-Z77X-UD5H (Rev.1.1)- F16c-mod).
Perhaps someone is able to check the mod1 version?
Hopefully this helps :)
Thanks all.
I have the same problem.
I moved the BIOS switch and could boot with F14, do I just run QFLASH from there to revert back or try another version?
* CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
* GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
* HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *
Just tried the F16c Rev 1.0 Mod1 and the USB issues with the DELL U3014 USB 3.0 hub/card reader combo (described in this thread) persist.
More over if using a PCIe USB 3.0 add-on card (which is what I resorted to) the xHCI setting has to be changed from "Smart Auto" to "Auto" or the keyboard will not be initialised until booting to the OS.
Comment