GIGABYTE Modified Bios

[virtualfred]

Re: GIGABYTE Modified Bios

Ok then thats two now confirming the 12T for G1 Assassin 2 is not good / missing bigfoot killer. Stasio / Virtualfred this Bios needs pulling from Downloads my friends until its fixed.

Thanks, removed.

[virtualfred]

Re: GIGABYTE Modified Bios

About Z77X-UD3H beta BIOS :

Thanks. I can now change memory frequency to 1600Mhz. What was wrong with your other mods? or what have changed with this one?

For something on this version and 20b mod, 18mod does not change the voltage in the memory
Increasing the voltage to 0.05 volts ends by resetting the BIOS

RAM: KHX1866C9D3K2/8G
Supply voltage 1.65 V

Really strange, i don't understand, supposed to be compatibility issue depending of materials and/or settings, but i never had these RAM issue. With BIOS F19* & F20a/b mod i was using Kingston HyperX 2x4GB 1600MHz CAS9 1.65V with XMP profile, now i'm using 2x4GB Crucial Tactical 1866MHz CAS9 1.55V with settings done manually.

With previous beta F20a & F20b, had a strange long beep at start-up if keyboard and mouse are plugged in Intel's USB3 (next to RJ45)... this little bug is solved with F20c, start-up beep is short as it should .
But with F20a,b & c while Windows 8 is running, still have BSOD if i unplug/replug keyboard and mouse (no issue with USB stick)... same problem while installing Intel INF chipset : when setup disconnect and reconnect USB (when updating), i always have a BSOD... the only way is to run setup.exe, quickly unplug Keyboard and mouse before USB update, when setup finish i can plug keyboard and mouse on VIA USB3 (next to PS2), then shut down system before plug them again in Intel's USB3.

[boe323]

Re: GIGABYTE Modified Bios

Ive had usb 3 issues on assassin2, mine got solved by leaving the generic drivers installed, maybe you could try that.

[boe323]

Re: GIGABYTE Modified Bios

that's another issue with 12t?, my drives where ok.

[virtualfred]

Re: GIGABYTE Modified Bios

Ive had usb 3 issues on assassin2, mine got solved by leaving the generic drivers installed, maybe you could try that.

Thanks, i'll try with generic Intel USB3 drivers.

[boe323]

Re: GIGABYTE Modified Bios

Had a reply from gigabyte about f12t beta for g1assassin2, bigfoot killer issue is known to them and f12t shouldn't have been put out, saying that next release will have the bigfoot issue fixed, im trying to convince them at the moment that theres OC issues, they say that they managed a simple overclock to 4ghz, even so, manual core voltage change don't work, and overclock using turbo ratios don't work, its really hard to tell them.

[snout]

Re: GIGABYTE Modified Bios

Had a reply from gigabyte about f12t beta for g1assassin2, bigfoot killer issue is known to them and f12t shouldn't have been put out, saying that next release will have the bigfoot issue fixed, im trying to convince them at the moment that theres OC issues, they say that they managed a simple overclock to 4ghz, even so, manual core voltage change don't work, and overclock using turbo ratios don't work, its really hard to tell them.

thx Boe323. Have to sit tight for now then.

[THe Jackal]

Re: GIGABYTE Modified Bios

Hi virtualfred!

Can you mod the latest BIOS for GA-Z68X-UD3-B3 ( GIGABYTE - Motherboard - Socket 1155 - GA-Z68X-UD3-B3 (rev. 1.0) ) ?

Thanks a lot!!!

[virtualfred]

Re: GIGABYTE Modified Bios

Hi virtualfred!

Can you mod the latest BIOS for GA-Z68X-UD3-B3 ( GIGABYTE - Motherboard - Socket 1155 - GA-Z68X-UD3-B3 (rev. 1.0) ) ?

Thanks a lot!!!

GA-Z68X-UD3 BIOS U1F mod

Modified with :

Intel Legacy RAID ROM 11.1.0.1413 to 12.7.0.1936
Intel UEFI SataDriver 11.6.0.1702 to 12.7.0.1936
Marvell 88SE91xx SATA RAID 1.0.0.0027 to 1.0.1.0025
Realtek PCIe GBE Controller 2.50 to 2.57
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023
Sandy (06A7) CPU-MicroCode rev.29 added
Ivy E1(06A9) CPU-MicroCode from rev17 to 19
Modified splash logo

[THe Jackal]

Re: GIGABYTE Modified Bios

GA-Z68X-UD3 BIOS U1F mod

Modified with :

Intel Legacy RAID ROM 11.1.0.1413 to 12.7.0.1936
Intel UEFI SataDriver 11.6.0.1702 to 12.7.0.1936
Marvell 88SE91xx SATA RAID 1.0.0.0027 to 1.0.1.0025
Realtek PCIe GBE Controller 2.50 to 2.57
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023
Sandy (06A7) CPU-MicroCode rev.29 added
Ivy E1(06A9) CPU-MicroCode from rev17 to 19
Modified splash logo

Thanks a lot virtualfred!!!!

[Mseirco]

Re: GIGABYTE Modified Bios

Hello a question, did the x79 ud3 F16 MOD bios update the q-flash utility like the F16 original? thank you

[virtualfred]

Re: GIGABYTE Modified Bios

Hello a question, did the x79 ud3 F16 MOD bios update the q-flash utility like the F16 original? thank you

[Mseirco]

Re: GIGABYTE Modified Bios

Then i can flash whit Q-flash utility next time, thank!

[ttRACE]

Re: GIGABYTE Modified Bios

Virtualfred can you please update the G1 SNIPER M3 (Z77) bios?

[Vigorsol]

Re: GIGABYTE Modified Bios

Hi Virtualfred, I tried flashing my X79S-UP5-WIFI with the F4X BIOS but it still doesn't work with my 4930k. I read the description of F4x, where it says the cpu micro code is updated. Do you have any idea why this still doesn't work? I also dug a little around and found an F4y, but this BIOS file cannot be loaded into Q-flash due to it saying q-flash is outdated...I saw multiple other people have the same problem in this thread...Thanks in advance.