stasio two bugs and a question:
I think this started in F32 and is still present in F33 through to F33j, when trying to save a BIOS to a USB stick through Q-flash, I get the message "Not able to save BIOS file successfully". This is through my front USB 3.0 port but also the BIOS USB port on the back of the motherboard. I can save individual profiles to the same USB stick just fine through both ports.
When setting up my fans in the BIOS (I have custom loop WC and SIV doesn't do a super great job for me), copying the profile for one fan to another using the "Apply to..." button does not copy the "Fan Control Use Temperature Input" setting. This has also been present for a few versions already and probably forever (I don't think it's a regression), I just haven't used it until a few months ago.
Also on that same note, it would be very, very nice to have a separate fan profile save feature to a file, it's quite a hassle to set up all my fans in the BIOS every time I update to a new version because I have to change all of them using manual curves. If that could be stored on the USB stick and imported, that'd be awesome. What would probably be easier for you guys (no coding required) is telling me how I can put my fan settings in the BIOS image before flashing it. I know they're saved there, that's also one of the reasons I used to save my current BIOS image to USB before flashing a new one, so I don't even have to go back in and restore my settings. If you could give me some pointers, like under which GUIDs can I find them, which software should I use to change it? I've got UEFITool but can't really do too much with it since there seems to be little human-readable info in there without a GUID mapping database which I don't have.
I think this started in F32 and is still present in F33 through to F33j, when trying to save a BIOS to a USB stick through Q-flash, I get the message "Not able to save BIOS file successfully". This is through my front USB 3.0 port but also the BIOS USB port on the back of the motherboard. I can save individual profiles to the same USB stick just fine through both ports.
When setting up my fans in the BIOS (I have custom loop WC and SIV doesn't do a super great job for me), copying the profile for one fan to another using the "Apply to..." button does not copy the "Fan Control Use Temperature Input" setting. This has also been present for a few versions already and probably forever (I don't think it's a regression), I just haven't used it until a few months ago.
Also on that same note, it would be very, very nice to have a separate fan profile save feature to a file, it's quite a hassle to set up all my fans in the BIOS every time I update to a new version because I have to change all of them using manual curves. If that could be stored on the USB stick and imported, that'd be awesome. What would probably be easier for you guys (no coding required) is telling me how I can put my fan settings in the BIOS image before flashing it. I know they're saved there, that's also one of the reasons I used to save my current BIOS image to USB before flashing a new one, so I don't even have to go back in and restore my settings. If you could give me some pointers, like under which GUIDs can I find them, which software should I use to change it? I've got UEFITool but can't really do too much with it since there seems to be little human-readable info in there without a GUID mapping database which I don't have.
Comment