If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi, stasio. Had Gigabyte relied yet?
I've tried to replace SmartFanCtrlDXE with the one from P67X-UD3 & P67X-UD3R. But it didn't work, and give me a horrible blue screen at boot.
Do you have an idea if there is any other modules I can try?
Thanks.
X79UP4-F4g installed and is working good so far with a multi overclock. I installed F4g with FPT from a bootable USB drive and all went good. They fixed a lot of the small annoying little bugs that have been popping up since f3x beta was released.
- Support IVB-E CPU
- EFIFLASH updated
- 30.Aug-04.Sep 13
(Note):
Please update your @BIOS to ver.2.33 before re-flashing BIOS.
(Only support X79-UP4, X79-UD3)
The GA-X79-UP4 - F4g works good and stable with the updated mods as well, but Turbo Boost doesn't seem to work.
Partially got Turbo Boost to register, but not at 38 as I typed in the settings. It showed as 35 and clocked the memory down to 1333. It wouldn't boot correctly, power cycled, and upon reboot, showed that the overclock failed. I selected load optimized defaults again, rebooted, plugged in all of the settings again, and it's stuck back at 32. Heading back to F3u Mod w/GbE15 again.
F4g doesn't power cycle correctly after saving major changes and resetting. On my last reboot to reflash F3u back, most of my drives were missing from the F12 boot option menu. I manually powered down and tried F12 again and they all displayed correctly.
I'm back to using F3u Mod w/Gbe15.
Last edited by MacG32; 09-04-2013, 07:20 PM.
Reason: 3rd Update
- Support IVB-E CPU
- EFIFLASH updated
- 30.Aug-04.Sep 13
(Note):
Please update your @BIOS tover.2.33 before re-flashing BIOS.
(Only support X79-UP4, X79-UD3)
Hi stasio, the link to ver 2.33 downloads a version that identifies itself as 2.32 B13.0829.1
Also is the corrupted bios bug for x79-ud3 fixed? I just received my mobo back from RMA due to f15m making my system unbootable. How can I update my backup bios to F11?
To update Backup BIOS to F11,Maim BIOS must be F11.....then from Main BIOS,before splash screen....ALT+F10
I'm using a USB keyboard. I hit Alt-F10 as soon as it powers on but no popup or anything. How can I tell my backup bios version? F9 System Information only shows the main BIOS ver. that's on F11. I want to make sure backup bios has F11 before flashing F15/F16d.
Comment