GIGABYTE Latest Beta BIOS

[stasio]

Re: GIGABYTE Latest Beta BIOS

^Ok,thanks for trying....I'll report today to HQ.
Which CPU you have?.....(will be usefull to list your spec.)

[Homeless]

Re: GIGABYTE Latest Beta BIOS

Anyone else having overclocking issues on Z77X-UD3H bios f20b? My multiplier on cpu z says it can go from 16-xx but it never goes over 34 on my 3570k

[stasio]

Re: GIGABYTE Latest Beta BIOS

Anyone else having overclocking issues on Z77X-UD3H bios f20b? My multiplier on cpu z says it can go from 16-xx but it never goes over 34 on my 3570k

Are you enable "Turbo" in BIOS....?
Edit:
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo)

Edit1:
Btw,
for Haswell users.....CPU Vcore works properly with CPU-Z 1.64.0 only,atm.
All other display VID Voltage.

[snozski]

Re: GIGABYTE Latest Beta BIOS

Thanks stasio, I have a i5 4670k

[Homeless]

Re: GIGABYTE Latest Beta BIOS

Are you enable "Turbo" in BIOS....?
Edit:
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo)

Edit1:
Btw,
for Haswell users.....CPU Vcore works properly with CPU-Z 1.64.0 only,atm.
All other display VID Voltage.

Turbo is enabled. Exact same settings on F18 bios works fine

[stasio]

Re: GIGABYTE Latest Beta BIOS

Thanks stasio, I have a i5 4670k

Did you try 1.25x (1.66x) dividers?

[stasio]

Re: GIGABYTE Latest Beta BIOS

New BIOS:

GA-Z87-D3HP - F5

- Support PCB ver 1.0/1.1
- Improve PCIE-E compatibility
- 14.Aug 13

[wsarahan]

Re: GIGABYTE Latest Beta BIOS

Hi guys

Let me ask you something

There is the new version for my MB GAZ77X-D3H bios, the f18g and today i`m using the f18e one

Should i update or it`s not necessary? The f18g one brigs something that really makes an interesting update?

Thanks

[snozski]

Re: GIGABYTE Latest Beta BIOS

New BIOS:

GA-Z87-D3HP - F5

- Support PCB ver 1.0/1.1
- Improve PCIE-E compatibility
- 14.Aug 13

Trying this bios now stasio, the bus speeds are back to a solid 100 so that is fixed.

I noticed the bios gui is back to the older version now , but I presume this is still a new update including what was improved in H and J. Since building my PC I've had some issues with nvlddmkm errors, I did think this could be my graphics card but seems more likely to be something to do with the motherboard (bios) I'm guessing the pcie-e compatibility fixes have improved this because while using the J bios even though the bus was wrong I did not get any nvlddmkm errors in event viewer and no display driver restarts. I'll report back how I get on with the full f5 release now.

my specs are as follows if its helpful

i5 4670k
gigabyte GA-Z87-D3HP motherboard
MSi twin forza 770gtx 2gb
Soundblaster X fi xtremegamer
8gb Kingston ddr3
Samsung 840 ssd 256gb

Thanks again

[Jason A Thomas]

Re: GIGABYTE Latest Beta BIOS

When can we expect a full F11 BIOS for the GB Z68X-UD7 seems to me ya better off purchasing a middle of the run board as half of the ones that where available when I got the UD7 have been upgraded to a UEFI Bios what give's...

Same crap happened with my GA-EX38T-DQ6 board

Seems the middle of the pack boards are better supported..

[acetone802000]

Re: GIGABYTE Latest Beta BIOS

Latest is F12j........

New BIOS:


GA-Z77-D3H - F21

thank you, it works very well with my i5 3570k overclocked !

[EvgeniX]

Re: GIGABYTE Latest Beta BIOS

wow Z77X-UD5H - F14 - 2012/08/23 - last "stable" version... something really wrong with gigabyte...

[snozski]

Re: GIGABYTE Latest Beta BIOS

The nvlddmkm event 14 errors seem to be back with the f5 official release :( Had 3 in the last 8 hours. It seemed to be fixed with f5J but then the bus was not 100mhz. Not sure which bios to use atm.


Log Name: System
Source: nvlddmkm
Date: 17/08/2013 05:36:56
Event ID: 14
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: snozski-PC
Description:
The description for Event ID 14 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.


If the event originated on another computer, the display information had to be saved with the event.


The following information was included with the event:


\Device\Video7
0096(1e48) 00000000 00000000


Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="nvlddmkm" />
<EventID Qualifiers="49322">14</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-17T04:36:56.851614000Z" />
<EventRecordID>37634</EventRecordID>
<Channel>System</Channel>
<Computer>snozski-PC</Computer>
<Security />
</System>
<EventData>
<Data>\Device\Video7</Data>
<Data>0096(1e48) 00000000 00000000</Data>
<Binary>0000000002003000000000000E00AAC00000000000 00000000000000000000000000000000000000</Binary>
</EventData>
</Event>

[stasio]

Re: GIGABYTE Latest Beta BIOS

wow Z77X-UD5H - F14 - 2012/08/23 - last "stable" version... something really wrong with gigabyte...

Did you try F15....?.....
2013/02/07

Uploaded here.

Edit:
Modded F15 will be post in BIOS Mod thread.

[morpheus67]

Re: GIGABYTE Latest Beta BIOS

Did you try F15....?.....
2013/02/07

Uploaded here.

Edit:
Modded F15 will be post in BIOS Mod thread.

nono, stasio i mean GA-Z77X-UD5h BIOS F15 / 31.05.2013 / Computertechnik JZelectronic