If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yeh I installed the Beta to try and solve an audio issue.
I started updating my bios also. And ended up with same problem... Audio issues, crackling all the time, Even bought new sound card. STILL same problem. Issues started after updating bios. But if i tryed older versions, then no help.
So can someone help? GA-EX58-UD5 (v1.0) BIOS (f13j)
Change log: Correct hang at IDE Detection with Crucial C300 if firmware bypass mode selected with disk on Marvell port 7
(This may apply to other SSD/HDD as well) - Please Force Update Marvell Firmware with this update
Yes, to the users having issue with larger BIOS sizes, you must use @BIOS or SPIFlash to flash the larger file sizes, then you can use Qflash after that as you normally should.
Saboid, and any others with @BIOS issues, please be sure you are using the latest @BIOS (You have to uninstall old before you install new).
Change log: Correct hang at IDE Detection with Crucial C300 if firmware bypass mode selected with disk on Marvell port 7
(This may apply to other SSD/HDD as well) - Please Force Update Marvell Firmware with this update
If you are affected by the above issue, please see my suggested update method here
Nice to hear it is working Pablo, and nice to see the new bonus temp sensor detection too!
To those wanting this UD9 modified, it can be done, but I think they purposefully put in an older Intel ROM to fix the issue with the Marvell ports, as I noticed the UD7 BIOS that corrected this is now using 8.9.
So if the latest Intel ROM is put back in it may break the Marvell fix, so up to you?
Folklore, what board/BIOS are you asking about to compare that with?
I could mod it, and then you could test and see if it breaks the Marvell fix, but that might just be how they fixed it since they removed 9.6 and put in 8.9
Comment