GIGABYTE Latest Beta BIOS

[peppercute]

Re: GIGABYTE Latest Beta BIOS

Beta BIOS update for GA-X58A-UD7 Rev. 1.0 F8o

X58A-UD7-F8o.zip

Wthat about a mod version of thix?

[Syncmahv]

Re: No Post Screen! GA-EX58-UD5 (v1.0) BIOS (f13j)

Yeh I installed the Beta to try and solve an audio issue.

I started updating my bios also. And ended up with same problem... Audio issues, crackling all the time, Even bought new sound card. STILL same problem. Issues started after updating bios. But if i tryed older versions, then no help.

So can someone help?
GA-EX58-UD5 (v1.0) BIOS (f13j)

[folklore]

Re: GIGABYTE Latest Beta BIOS

any improvement noticed over F8K ? Not tried any others

Beta BIOS update for GA-X58A-UD7 Rev. 1.0 F8o

X58A-UD7-F8o.zip

Change log: Correct hang at IDE Detection with Crucial C300 if firmware bypass mode selected with disk on Marvell port 7
(This may apply to other SSD/HDD as well) - Please Force Update Marvell Firmware with this update


If you are affected by the above issue, please see my suggested update method here
http://forums.tweaktown.com/gigabyte...tml#post392553

[Lsdmeasap]

Re: GIGABYTE Latest Beta BIOS

Yes, to the users having issue with larger BIOS sizes, you must use @BIOS or SPIFlash to flash the larger file sizes, then you can use Qflash after that as you normally should.

Saboid, and any others with @BIOS issues, please be sure you are using the latest @BIOS (You have to uninstall old before you install new).

Latest is available here
GIGABYTE - Support & Downloads - Utility - Motherboard



Beta BIOS update for GA-X58A-UD9 F9q
X58A-UD9-F5q.zip

Change log: Correct hang at IDE Detection with Crucial C300 if firmware bypass mode selected with disk on Marvell port 7
(This may apply to other SSD/HDD as well) - Please Force Update Marvell Firmware with this update

If you are affected by the above issue, please see my suggested update method here

http://forums.tweaktown.com/gigabyte/43893-f8m-unstable-6.html#post392553

[Pablo]

Re: GIGABYTE Latest Beta BIOS

Thanks for ud9 bios, will install/update tonight, cant do it with 10 mins till work time, dont wanna screw it up as such.

Thanks again.

Will post with results, no doubt.

[Lsdmeasap]

Re: GIGABYTE Latest Beta BIOS

Good luck Pablo, hope it works - it should but I just said that because I can't actually test that one myself :)

0007 firmware out eh? Thanks, was just heading over to their forum

[Lsdmeasap]

Re: GIGABYTE Latest Beta BIOS

I am VIP there, so I knew it was coming a while back, just been offline for a few days so I missed it :)

Updating a C300 RAID array now, then I'll post my USB updater over there for everyone.

Hopefully this fixes the issues for everyone that was affected by the freezing or stuttering in OS.

[Lonelobo]

Re: GIGABYTE Latest Beta BIOS

can som1 make a modde dbios for the X58A-UD9 based on latest biozs posted a few post above with latest lan+intel rom? Tnx in advance

[Pablo]

Re: GIGABYTE Latest Beta BIOS

yeah, typical firmware 007 and new ud9 bios, both which need care to update, and i only had 10 minutes to spare,

Will prob update ssd first, just coz its a good idea, even though isnt part of the bios issues.

[folklore]

Re: GIGABYTE Latest Beta BIOS

Bump

any improvement noticed over F8K ? Not tried any others

[Pablo]

Re: GIGABYTE Latest Beta BIOS

UD9 F5q bios working ok so far.

easytune now adds the nb temps/ seen as system3, so thats a nice bonus, shows 3c lower than speedfan though, not sure which is most accurate?

Will keep informed if any issues arise on this beta.

[Lsdmeasap]

Re: GIGABYTE Latest Beta BIOS

Nice to hear it is working Pablo, and nice to see the new bonus temp sensor detection too!

To those wanting this UD9 modified, it can be done, but I think they purposefully put in an older Intel ROM to fix the issue with the Marvell ports, as I noticed the UD7 BIOS that corrected this is now using 8.9.

So if the latest Intel ROM is put back in it may break the Marvell fix, so up to you?

Folklore, what board/BIOS are you asking about to compare that with?

[Pablo]

Re: GIGABYTE Latest Beta BIOS

ok, see where your coming from.

Pc booted up fine this morning, so for me, il stick with the way it is now. on F5q

Shame that it looks like the firmware was just changed to an older version that worked, but thatl do.

[Lsdmeasap]

Re: GIGABYTE Latest Beta BIOS

I could mod it, and then you could test and see if it breaks the Marvell fix, but that might just be how they fixed it since they removed 9.6 and put in 8.9

[Pablo]

Re: GIGABYTE Latest Beta BIOS

Started pc up this session.

Both ssds failed to be seen again.

Switched bios on sata6/7 back to ide from ahci, and working....

so looks like an ahci issue also.

oh well back to square 1 for me then.