Re: Haswell Overclocking Guides / Results
Some things I have noticed with my board may cross over to there boards but here are some voltage read outs I have seen while overclocking. These settings were done with LLC set to Extreme
This is what I have tested/seen so far. But look at vcore the closer you get to 1.4v the more the board over volts. Cpuz 1.64.0 and higher seem to show correct vcore at full load compared to a dmm but only 1.64.0 for me show correct idle voltage.
Also noticed when setting fixed voltage for vring with all power saving options enabled in bios vring will also drop low along with uncore speed at idle.
Some things I have noticed with my board may cross over to there boards but here are some voltage read outs I have seen while overclocking. These settings were done with LLC set to Extreme
Code:
Bios Dmm full load Vcore 1.2v-1.35v 0.01v-0.15v Higher 1.35v+ 0.02v+ Higher 1.330v 1.344v vRing 1.170v 1.189v
This is what I have tested/seen so far. But look at vcore the closer you get to 1.4v the more the board over volts. Cpuz 1.64.0 and higher seem to show correct vcore at full load compared to a dmm but only 1.64.0 for me show correct idle voltage.
Also noticed when setting fixed voltage for vring with all power saving options enabled in bios vring will also drop low along with uncore speed at idle.
Comment