If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm interested in modding the Z87X-UD5H F6 bios. I have seen how to update the RAID opt rom but need more info on how to update the microcode and other areas, can one of the gurus point me in the right direction?
---------------------------------------------------------------------------------------------------------------------------------------------- Gigabyte Z87X-UD5H BIOS v F6L
16GB GeIL Dragon RAM PC3-12800C11 1600MHz Dual Channel (2x8GB)
Intel Core i7 4770k @ 4.7ghz
2 x EVGA 770GTX SC SLI
2 x Samsung 840 Pro 120GB SSD (RAID0) 2 x Hitachi 2TB HDD - (RAID1)
XFX Pro Series 850w PSU
Corsair Obsidian 900D
Cooled with a custom 360 rad and EK Supremacy CSQ Clean block with 6 x Corsair SP120 Quiet fans.
-------------------------------------------------------------------------------------------------------------------
Intel Legacy RAID for SATA - 11.6.0.1702 to 12.7.0.1936
Intel RSTe RAID 3.5.0.1005 to 3.8.0.1009
ME Firmware 8.1.30.1350
Intel PCI Accelerated SVGA BIOS 2158 PC 14.34
Intel Boot Agent GE 1.3.72 to 1.5.13
Intel (06D7) CPU Microcode 70B to 70D
Intel Legacy RAID for SATA 11.6.0.1702 to 12.7.0.1936
Intel RSTe RAID 3.5.0.1005 to 3.8.0.1009
Intel Boot Agent GE 1.3.72 to 1.5.13
Marvell 88SE91xx Adapter - ROM 1.0.1.0025
Intel (06D7) CPU Microcode 70B to 70D
Intel Legacy RAID for SATA 11.6.0.1702 to 12.7.0.1936
Intel RSTe RAID 3.5.0.1005 to 3.8.0.1009
ME Firmware 8.1.30.1350
Intel Boot Agent GE 1.3.72 to 1.5.13
Marvell 88SE91xx Adapter - ROM 1.0.1.0025
Intel (06D7) CPU Microcode 70B to 710
Intel Legacy RAID for SATA 11.6.0.1702 to 12.7.0.1936
Intel RSTe RAID 3.5.0.1005 to 3.8.0.1009
Intel Boot Agent GE 1.3.72 to 1.5.13
Marvell 88SE91xx Adapter - ROM 1.0.1.0025
Intel (06D7) CPU Microcode 70B to 710
Intel Legacy RAID for SATA 11.6.0.1702 to 12.7.0.1936
Intel RSTe RAID 3.5.0.1005 to 3.8.0.1009
ME Firmware 8.1.30.1350
Intel PCI Accelerated SVGA BIOS 2158 PC 14.34
Intel Boot Agent GE 1.3.72 to 1.5.13
Intel (06D7) CPU Microcode 70B to 710
Hello! In first, i am sorry for my bad english. I hope you understand me..!
I have a Gogabyte x79 ud3 and window 7 64bits
I allready flashed my x79 ud3 whit the F14 mod 2 BIOS. Eeverything rule fine BUT, i very dont understand how i have to do for flash the ME FIRMWARE to 8.1.40.1416!
When i open the flash.bat from local-win64, i got a CMD windows whit this,
"ERROR 8193 INTEL R ME INTERFACE : cannot locat ME device driver
STATUS: restore point operation failed."
!!
I try all the day and i dont understand! Please tell my what i do wrong..
Comment