GIGABYTE Modified Bios

[Shizuko]

^
Try to request on win-raid forum.....

https://www.win-raid.com/f50-NVMe-Su...d-Systems.html

Thank! I have a Samsung 950 pro, the OS boots from it, it can't work with Sata 3, moreover, it hangs in such loads as games. Without nvme, ssd does not hang

[stasio]

^
Try to request on win-raid forum.....

https://www.win-raid.com/f50-NVMe-Support-for-old-Systems.html

[Shizuko]

Please, you can modify BIOS X58A-OC, add nvme support, and add microcodes for X56xx processors, I have X5675. My NVME PCI adapter does not work with SATA3.0 Marvell 88SE9182 =(

[NуроFеn]

Please update the BIOS for GA-X58A-UD5 Rev 2.0

[stasio]

Re: BIOS modificado GIGABYTE

if I am in the last official U1C if you have any mod version I would appreciate it

Uploaded Oct 2014,so look arround this date what is modded.


http://www.mediafire.com/file/00c1nb...b3-u1c-mod.zip

[freddydeitor]

Re: BIOS modificado GIGABYTE

if I am in the last official U1C if you have any mod version I would appreciate it

[stasio]

Re: GIGABYTE Modified Bios

hello I have a board z68ma-d2h-b3 1.3v .. in your mod file is no longer available ... can someone please re-upload it or if you can give me a version of the mod now that it is 2020 .. in advance I thank the one who I supported

Are you on UEFI BIOS U1c...?

[freddydeitor]

Re: GIGABYTE Modified Bios

hi I have a GA-G41M-combo 1.3 board I wanted to know if any of you could help me update as much as possible this bios and add the microcodes to use a xeon x5460

I thank you in advance for your support

[freddydeitor]

Re: GIGABYTE Modified Bios

hello I have a board z68ma-d2h-b3 1.3v .. in your mod file is no longer available ... can someone please re-upload it or if you can give me a version of the mod now that it is 2020 .. in advance I thank the one who I supported

[ZipZwan]

Re: GIGABYTE Modified Bios

Before you ask for modded BIOS,did you try BIOS after F9...?
Here is:
GA-Z97-D3H - F10a
GA-Z97-D3H - F10b
GA-Z97-D3H - F10c
GA-Z97-D3H - F10d
GA-Z97-D3H - F10e

Hello, and thx for the help. I could not try further than F9 Bios, because it was the last one provided on official GigaByte site.
I though that those Bios F10a >> F10e are modded Bios...
Sorry for the lexic confusion.
PS: After my post, I discovered F10e on main page, so I will give it a try. But first I think, I will read about downgrade of Bios just in case.... I think, it is a wise choice...
And do you think that this "low" speed benchmark of an SSD can be related to an Bios version?? or maybe a hardware limitation of the motherBoard maybe?
Thx.

[stasio]

Re: GIGABYTE Modified Bios

Maybe some expert user around can enlight a lamba user??
Thx

Before you ask for modded BIOS,did you try BIOS after F9...?
Here is:
GA-Z97-D3H - F10a
GA-Z97-D3H - F10b
GA-Z97-D3H - F10c
GA-Z97-D3H - F10d
GA-Z97-D3H - F10e

[ZipZwan]

Re: GIGABYTE Modified Bios

Hello, is any modded Bios available for motherBoard GA-Z97-D3H ??
I recently updated my rig, and added an SDD, Samsung 970 EVO 250GB, So from info I gathered around Boot from SSD NVMe is kind of complicated/ not supported, but I did not encounter any problem at all.
I disconnected all drive from the motherBoard, Formatted the SSD in GPT with GParted, installed Windows 10 onto it, and successfully boot from the SSD on everybody, as with an old HDD drive... SSD is shown in Bios as should, so everything fine till here.
So, on Windows 10, I did some speed test on this SSD and I am getting result around 1500MB/sec ??
I dont know what is wrong, as other feedback are getting around 3500Mb/s. On Official site too. I cheked the SSD with Samsung SSD and it is Genuine, so no issue at this site.
So maybe, it is an issue with the motherBoard ??? an Bios update could increase this speed , to be kind of normal?? PS: on GigaByte page, the MotherBoard is supposed to handle speed up to 10Gb/s
GA-Z97-D3H (rev. 1.1): GA-Z97-D3H (rev. 1.1) | Motherboard - GIGABYTE Global
Maybe some expert user around can enlight a lamba user??
Thx

[stasio]

Re: GA-X58A UD3r and F6 bios

How do i flash the F8b bios ? I still cannot get the F6 to work

BIOS Flashing - A "How To ~ Qflash Guide"

[david carey]

Re: GA-X58A UD3r and F6 bios

Hi, I also saw your post on overclock.net.
If you want to flash newer BIOS then F6 in DOS,you must use new FlashSpi.exe which is included in F7L BIOS.
Btw,
latest is F8a

GA-X58A-UD3R (rev. 1.0) | Motherboard - GIGABYTE Global

Edit:
you can flash also F8b with SLIC.
Source

How do i flash the F8b bios ? I still cannot get the F6 to work

[david carey]

Re: GA-X58A UD3r and F6 bios

Hi, I also saw your post on overclock.net.
If you want to flash newer BIOS then F6 in DOS,you must use new FlashSpi.exe which is included in F7L BIOS.
Btw,
latest is F8a

GA-X58A-UD3R (rev. 1.0) | Motherboard - GIGABYTE Global

Edit:
you can flash also F8b with SLIC.
Source

Does F6 bios not work then ? The newer ones F7 and F8 bring up a file size error . The F6 correctly identifies all installed memory , whereas the F4 and F5 do not . I would like to see if this carries over to windows but all avenues to enter windows seem to be closed , to me at least . How do I load F7 and F8 , i am very new to this