Hi guys! I was searching very thoroughly the last month in order to get as much information as I could regarding P45 chipset and DDR3 settings!! I have tried literally a million settings and I am not a noob either! It drives me crazy!!
Here is my story and anyone that has experience from Intel P45 Chipset is welcome to give me some advice! Its settings are a lot different than my older P35 board!
Previously I had my E8600 ovelclocked to 4.3 GHz without strain in my previous Gigabyte p35c-ds3r motherboard and paired with ram ddr2 5-5-5-15 1033Mhz but I wanted to upgrade to this EP45T-ds3 with 2x2Gb DDR3 HyperX 14400D3T1K3 (1800Mhz at 9-9-9-27 rating) support and crossfire (2 cards HD4850).
The most "stable" settings that I could achieve is:
FSB: 420 (it gives 4200MHz)
CPU Termination: 1,30v
CPU PLL: 1.50v
MCH Voltage: 1.24v
RAM Vcore: 1.90v
RAM Timings: 8-8-8-24-78
Static tREAD: 9
Help guys!! Only you can help me out!
Here is my story and anyone that has experience from Intel P45 Chipset is welcome to give me some advice! Its settings are a lot different than my older P35 board!
Previously I had my E8600 ovelclocked to 4.3 GHz without strain in my previous Gigabyte p35c-ds3r motherboard and paired with ram ddr2 5-5-5-15 1033Mhz but I wanted to upgrade to this EP45T-ds3 with 2x2Gb DDR3 HyperX 14400D3T1K3 (1800Mhz at 9-9-9-27 rating) support and crossfire (2 cards HD4850).
The most "stable" settings that I could achieve is:
FSB: 420 (it gives 4200MHz)
CPU Termination: 1,30v
CPU PLL: 1.50v
MCH Voltage: 1.24v
RAM Vcore: 1.90v
RAM Timings: 8-8-8-24-78
Static tREAD: 9
Help guys!! Only you can help me out!
Comment