Announcement

Collapse
No announcement yet.

GA-EP45-UD3P - Won't boot with 450FSB

Collapse
X
Collapse
 
  • Page of 60
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 8 48 55 56 57 58 59 60 template Next
  • #856
    Re: GA-EP45-UD3P - Won't boot with 450FSB

    That the world sucks and Prime is evil OR ...... you are so close, so close ......





    CPU     =         i7 950 - DO stepping - Batch #3014A844
    Cooling = EK HF Full Nickel     - XSPC RX360 - Laing DDC 18W - XSPC Bay Reservoir
    Motherboard = GA-X58A-UD3R Revision 2    , BIOS Version = Award FC
    Ram = 3x2gig Corsair TR3X6G1600C8D G
    Video = 2 X Palit GTX460 Sonic Platinum 1GB OC sli
    Monitor = 22" LG Flatron W2242T 1680 x 1050 Case = Coolermaster CM690
    PSU = Corsair HX850
    OS = Windows 7 Professional x64

    Comment

    • #857
      Re: GA-EP45-UD3P - Won't boot with 450FSB

      Happened to me too after 3 days of Blend / Small / Large...following the "episode" I was as stable as a three legged table but strangely enough I left it powered off overnight and since that have run 510x8.5 without any issue (Personally I think the BIOS got fed up of my and tried revolting!).
      * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
      * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
      * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

      Comment

      • #858
        Re: GA-EP45-UD3P - Won't boot with 450FSB

        D-an-W, Octopuss,

        Are you using GTLREF at all?

        Allows lower mch volts, vtt volts, and shows less volt in Windows for my x48





        CPU         =                 i7 950 - DO stepping - Batch #3014A844
        Cooling = EK HF Full Nickel         - XSPC RX360 - Laing DDC 18W - XSPC Bay Reservoir
        Motherboard = GA-X58A-UD3R Revision 2        , BIOS Version = Award FC
        Ram = 3x2gig Corsair TR3X6G1600C8D G
        Video = 2 X Palit GTX460 Sonic Platinum 1GB OC sli
        Monitor = 22" LG Flatron W2242T 1680 x 1050 Case = Coolermaster CM690
        PSU = Corsair HX850
        OS = Windows 7 Professional x64

        Comment

        • #859
          Re: GA-EP45-UD3P - Won't boot with 450FSB

          Doesn't ring a bell Salty, any screenshots?
          * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
          * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
          * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

          Comment

          • #860
            Re: GA-EP45-UD3P - Won't boot with 450FSB

            GL what?

            The strange thing about my system is that I might Prime for 12+ hours, even 24, then it fails or I stop the test, and it fails almost immediatelly when I start again. I don't get it. Like last time - 24 hours passed with heavy gaming and movies meanwhile, and then "Prime95 stopped working..." after lousy one hour. I know there is SOME instability, because 450x9 didn't fail once in either way, but bloody hell, I am getting tired.
            I WAS stable at 533, then 540, then nothing, and now even 510 kicks my unholy butt? Maybe it's time to buy i7.

            Comment

            • #861
              Re: GA-EP45-UD3P - Won't boot with 450FSB

              Yes, everyone in this thread is using modified reference voltages, or they wouldn't be on over 500 FSB.

              Note that they aren't referred to as GTL's in the UD3 BIOS, But as CPU Ref and MCH Ref (There is no second CPU GTL).
              Coolermaster CM 690 II advance Case
              Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
              P55A-UD4 v2.0 @ F14
              Core i5 760 @ 20 x 201, 4.02GHz
              TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
              2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
              2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
              Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
              Corsair X32 200MB/s Read & 100MB/s Write
              WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
              Samsung F3 500GB Backup/Images
              Noctua 1300RPM 19dB case fan (rear extraction)
              3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
              Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

              Comment

              • #862
                Re: GA-EP45-UD3P - Won't boot with 450FSB

                Originally posted by Salty View Post
                D-an-W, Octopuss,

                Are you using GTLREF at all?

                Allows lower mch volts, vtt volts, and shows less volt in Windows for my x48
                I was going to respond to this earlier today with exactly what Psycho had posted, but I knew Psycho would want to do the honors as he is one of the resident GTL ref gurus.
                1) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @[email protected] bios, TRUE 120, Scythe UltraKaze 44cfm, 4x2gb GSkill 8500, Visiontek 3870, Corsair TX850, Antec 900, Win7-64 Home.
                2) Gigabyte EP45-UD3P (rev 1.1, bios F9) E8400 @[email protected] bios, TRUE 120, Schythe UltraKaze 44 cfm, 4x2gb Buffalo FireStyx 8500, XFX 5770, Corsair AX850, CM Scout, WinXP Pro/Win 7-64 Home.
                3) Gigabyte P55A-UD4P (rev 1.0, bios F5) i5 750 @[email protected] bios, CM Hyper 212+, 4x2gb G.Skill Ripjaw 1600, 7900GS, Corsair TX750, CM Scout, Win7 Pro-64.
                4) Asus P8Z68-V Pro (bios 0801), i5-2500K @[email protected] cpuz, Megahalem rev.B, 4x4gb GSkill Sniper 1600, Corsair AX850, Antec 902, Corsair Performance 3 128GB, Win7-64 Home.

                Comment

                • #863
                  Re: GA-EP45-UD3P - Won't boot with 450FSB

                  Ah well, its not that then.





                  CPU                   =                                     i7 950 - DO stepping - Batch #3014A844
                  Cooling = EK HF Full Nickel                   - XSPC RX360 - Laing DDC 18W - XSPC Bay Reservoir
                  Motherboard = GA-X58A-UD3R Revision 2                  , BIOS Version = Award FC
                  Ram = 3x2gig Corsair TR3X6G1600C8D G
                  Video = 2 X Palit GTX460 Sonic Platinum 1GB OC sli
                  Monitor = 22" LG Flatron W2242T 1680 x 1050 Case = Coolermaster CM690
                  PSU = Corsair HX850
                  OS = Windows 7 Professional x64

                  Comment

                  • #864
                    Re: GA-EP45-UD3P - Won't boot with 450FSB

                    Hey D-an-W was just wondering how you came along with the Mac OS? I was thinking about trying it again. Did you do yours on a separate hd or did you use a partition? I have been able to get it to install but would not boot. I think it was a bios setting. Did you have to make any changes in the bios to get it to work?
                    Main Rig
                    Gigabyte z87x-OC
                    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
                    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
                    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
                    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
                    HiS ATI HD 6950
                    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
                    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
                    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
                    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
                    CORSAIR CMPSU-850TX PSU
                    Swiftech MCP655-B Pump
                    EK Supremacy Cpu Block
                    Swiftech Mcres Micro Rev 2 Reservoir
                    Black Ice GTX Xtreme 360 Radiator



                    Comment

                    • #865
                      Re: GA-EP45-UD3P - Won't boot with 450FSB

                      Yes, coming along pretty good...will get a mini guide together for you later today or tomorrow.
                      * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
                      * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
                      * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

                      Comment

                      • #866
                        Re: GA-EP45-UD3P - Won't boot with 450FSB

                        cool thanks man I appreciate that
                        Main Rig
                        Gigabyte z87x-OC
                        Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
                        G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
                        Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
                        Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
                        HiS ATI HD 6950
                        Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
                        Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
                        Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
                        Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
                        CORSAIR CMPSU-850TX PSU
                        Swiftech MCP655-B Pump
                        EK Supremacy Cpu Block
                        Swiftech Mcres Micro Rev 2 Reservoir
                        Black Ice GTX Xtreme 360 Radiator



                        Comment

                        • #867
                          Re: GA-EP45-UD3P - Won't boot with 450FSB

                          Dan if you make a MAC Guide, please PM me the link and I will add it to my signature for others. You should do the same.

                          I would sticky it, but I don't think we get enough MAC Users to warrant that.

                          Ever thought about making a P45 overclock guide? That would be superb if you felt up to it, much better way to spend your time instead of testing 72 hour prime95 run

                          Comment

                          • #868
                            Re: GA-EP45-UD3P - Won't boot with 450FSB

                            Psycho & PJ are far more qualified than me to do an OC guide than me!

                            I just have a couple of things to sort out on the Mac front before I can "publish" anything...
                            * CPU: Intel i7-3770K @ Stock * Cooling: Corsair H80i / Noctua NF-F12 x2 * MoBo: Gigabyte GA-Z77X-UD5H (Rev. 1.1 - BIOS F16 Mod16) * RAM: Crucial 1600MHz DDR3 32GB (4x8GB) *
                            * GPU: Intel HD 4000 (768MB) * Mon 1: Dell U2410 (A07) * Mon 2: Panasonic TX-P55VT50B * Cam: Logitech C910 HD * BD: Pioneer BDR-208DBK * HD 1: Crucial SSD M4-CT256M4SSD2 256GB *
                            * HD 2: Western Digital Caviar Green 3TB * IR: Apple Infrared Board 922-7195 * WiFi & BT: Apple Broadcom BCM94360CD (802.11 a/b/g/n/ac - Bluetooth 4.0 * PSU: Seasonic M12 - 600W *

                            Comment

                            • #869
                              Re: GA-EP45-UD3P - Won't boot with 450FSB

                              Cool every much appreciated.

                              Side note I found a copy of Snow OSX universal install distro (10.6) supposably the first Mac OS distro but I could not boot up as it was "Still waiting on root device" error.
                              Main Rig
                              Gigabyte z87x-OC
                              Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
                              G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
                              Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
                              Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
                              HiS ATI HD 6950
                              Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
                              Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
                              Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
                              Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
                              CORSAIR CMPSU-850TX PSU
                              Swiftech MCP655-B Pump
                              EK Supremacy Cpu Block
                              Swiftech Mcres Micro Rev 2 Reservoir
                              Black Ice GTX Xtreme 360 Radiator



                              Comment

                              • #870
                                Re: GA-EP45-UD3P - Won't boot with 450FSB

                                What's up with everyone? Dan busy in the kitchen and other sorting through their butterfly collections? :P

                                I think I FINALLY nailed my dreaded 534x7.5 setup down - maybe, MAYBE it was too low VCORE for Blend test. Not 100% sure, but I passed 30 hours! I am gonna give it a shot at 540x7.5 again after dozen weeks. MCH core still at 1.3 though, but I am at the point where I no longer care.
                                What I gotta live with is that I probably have slightly inferior CPU that requires 1.36250 past 4GHz :(

                                Comment

                                Previous 1 8 48 55 56 57 58 59 60 template Next
                                Working...
                                X