Originally posted by kazuPC3
View Post
Announcement
Collapse
No announcement yet.
GIGABYTE Latest Beta BIOS
Collapse
This is a sticky topic.
X
X
-
Originally posted by Aeryn View Postx570 Aorus Master - F31i
CPU performs terribly and generated 8000 WHEA errors in only a few minutes in the operating system
A corrected hardware error has occurred.
Reported by component: Processor Core
Error Source: Unknown Error Source
Error Type: Bus/Interconnect Error
Processor APIC ID: 0
Comment
-
F31h | 5950X | Aorus Xtreme | Royal Z 4000 CL16 | 20H2 (19042.572) | Chipset v2.10.13.408 | RTX 3080 457.30 DCH
Running optimized defaults (with CSM turned off):
- Cannot benchmark in R20/R23 (hard reboot as soon as image starts rendering), single core is fine
- Hard reboots at random intervals on idle (absolutely nothing running except essentials in background)
- Aida64 memory copy is fine
- Aida64 System Stability hard reboot either right at the start of after a few seconds (intermittent)
- CPU-Z Stress test seems ok
- Disabling Core Boost Perf results in same as above
The only thing that works for me right now is set Vcore to Normal and offset by +0.1v, with that I'm able run RAM at 3200 auto timings with no WHEA errors and (so far) no random reboots.
Comment
-
Originally posted by Alvy View PostF31h | 5950X | Aorus Xtreme | Royal Z 4000 CL16 | 20H2 (19042.572) | Chipset v2.10.13.408 | RTX 3080 457.30 DCH
Running optimized defaults (with CSM turned off):
- Cannot benchmark in R20/R23 (hard reboot as soon as image starts rendering), single core is fine
- Hard reboots at random intervals on idle (absolutely nothing running except essentials in background)
- Aida64 memory copy is fine
- Aida64 System Stability hard reboot either right at the start of after a few seconds (intermittent)
- CPU-Z Stress test seems ok
- Disabling Core Boost Perf results in same as above
The only thing that works for me right now is set Vcore to Normal and offset by +0.1v, with that I'm able run RAM at 3200 auto timings with no WHEA errors and (so far) no random reboots.
Comment
-
X570 BIOS updated to F31k
- New ABL which should fix some broken XMP
Some B550 BIOS update;
B550 AORUS MASTER.F11j
http://www.mediafire.com/file/8b2rm0...R.F11j.7z/file
B550 AORUS PRO.F11j
http://www.mediafire.com/file/warc0q...O.F11j.7z/file
B550IAORUSPROAX.F11j
http://www.mediafire.com/file/b4gzru...X.F11j.7z/fileLast edited by stasio; 11-20-2020, 09:55 PM.
- Likes 1
Comment
-
F31k | 5950X | Aorus Xtreme | Royal Z 4000 CL16 | 20H2 (19042.572) | Chipset v2.10.13.408 | RTX 3080 457.30 DCH
With clear cmos + optimized defaults, same as previous post and:
- Weird empty light blue screen upon launching EFI w10 installation (have to press enter multiple time for it to go through)
- Cannot install Windows 10 with official ISO from USB (reboot loop at Getting Ready)
- Hard reboot on Ubuntu Live CD, I barely just opened terminal when it happens.
Still looks fine with Vcore/SOC Normal and offset +0.1v / RAM 3200 (Auto 22 22 22 53 1.2V). Little bummed out especially when I read that for some people x570 Xtreme + 5950X seems to work on defaults with minimal issues. Really weird.
Comment
-
x570 Aorus Master - F31k - 5900x
1900fclk with 1.1v soc, 950mv cldo_vddg_ccd/iod and 900mv cldo_vddp has not errored after some testing and 15 minutes OCCT Large.
2000fclk with auto volts (1.1v soc, 1.0v other three) was not happy and threw a WHEA error at idle, then 101 more shortly after i applied load. This is likely just a matter of tuning all of the voltages, though - a friend benching up to 2100 fclk on MSI has reported the need for careful tuning of all four of these to make it work on a specific board and CPU sample. I will investigate more with more time (:
Again thanks for the quick updates.
Comment
-
Originally posted by Alvy View PostF31k | 5950X | Aorus Xtreme | Royal Z 4000 CL16 | 20H2 (19042.572) | Chipset v2.10.13.408 | RTX 3080 457.30 DCH
With clear cmos + optimized defaults, same as previous post and:
- Weird empty light blue screen upon launching EFI w10 installation (have to press enter multiple time for it to go through)
- Cannot install Windows 10 with official ISO from USB (reboot loop at Getting Ready)
- Hard reboot on Ubuntu Live CD, I barely just opened terminal when it happens.
Still looks fine with Vcore/SOC Normal and offset +0.1v / RAM 3200 (Auto 22 22 22 53 1.2V). Little bummed out especially when I read that for some people x570 Xtreme + 5950X seems to work on defaults with minimal issues. Really weird.
I've been able to get 3200mhz ram really dialed in on timings, but the moment I go over 3200mhz the board won't post. Even settings super loose timings with upping the voltage it refuses to get past training.
Comment
Comment