GIGABYTE Latest Beta BIOS

[stasio]

Re: GIGABYTE Latest Beta BIOS

^
F6c or F6d.

[fastboy]

Re: GIGABYTE Latest Beta BIOS

ok thankyou I'm using f6c and seems to be working ok,could you tell me the difference from f6c to f6d and is it worth changing? (sorry I'm new to all this bios stuff)

many thanks
david

[filipepferraz]

Re: GIGABYTE Latest Beta BIOS

The GA-Z170X-Gaming 3 - F8e bios is for rev 1.0 or 1.1?

[skan]

Re: GIGABYTE Latest Beta BIOS

Hello

I have a GA-X58A-UD3R and I'm not able to boot from any pendrive inserted on the USB3.0 connector.
I've also have an extra USB3.0 controller, but I can't choose to boot from it.

Is it possible to modify the BIOS to be able to boot from them?

Thanks

[Hase]

Re: GIGABYTE Latest Beta BIOS

Hi, I have a z170-hd3p. I see that there's an update for BIOS F6d available, but there is no Changelog at all. I currently have an issue with my gigabyte support (id # 300542) but have not gotten an answer yet. My issue is that the BIOS PCIe capabilities are reported incorrectly by the BIOS to the kernel, so I cannot use IOMMU groups for proper device isolation (this is for having a virtual machine with near-native performance). I wonder, can we get some information about the changes and if the BIOS might help at all? Thanks!

[Overcast]

Re: GIGABYTE Latest Beta BIOS

Hello

Is it possible to overclocking a non k 6500 on a GA-Z170-Gaming K3-EU board?

[stasio]

Re: GIGABYTE Latest Beta BIOS

Hello

Is it possible to overclocking a non k 6500 on a GA-Z170-Gaming K3-EU board?

BIOS F1 working with non K cpu....

http://download.gigabyte.asia/FileList/BIOS/mb_bios_ga-z170-gaming-k3_f1.zip

[Overcast]

Re: GIGABYTE Latest Beta BIOS

BIOS F1 working with non K cpu....
http://download.gigabyte.asia/FileLi...ming-k3_f1.zip

I've tried 110MHz BCLK, and it didn't boot. :(

[Eagle_i_am]

Re: GIGABYTE Latest Beta BIOS

I've tried 110MHz BCLK, and it didn't boot. :(

There was a guy on overclocking.guide
He says you have to disable manually eist and all c-states, toorbo boost, internal graphics

[Overcast]

Re: GIGABYTE Latest Beta BIOS

There was a guy on overclocking.guide
He says you have to disable manually eist and all c-states, toorbo boost, internal graphics

Thanks a lot! I'm also increased VCCIO and the System Agent voltages to 1.2V.

[Eagle_i_am]

Re: GIGABYTE Latest Beta BIOS

Thanks a lot! I'm also increased VCCIO and the System Agent voltages to 1.2V.

И чо, помогло?

That helped? lol

[Overcast]

Re: GIGABYTE Latest Beta BIOS

И чо, помогло?

That helped? lol

[email protected], выше не стал, не хочу сильнее поднимать напряжение

Yes, it helped

[Eagle_i_am]

Re: GIGABYTE Latest Beta BIOS

[email protected], выше не стал, не хочу сильнее поднимать напряжение

Yes, it helped

Do not want even to try?
Actually, i have issues on 4,5 ghz on 6400, cant boot normally when raise bclk over 150. On 150 and 4,0 everything is ok.
Can you try it, if there is same problem?
If so, then i can say its all gigabyte problem. I have z170-d3h, our boards have similar VRM.

Actually, you have 6500, maybe its not the same as my 6400 with 167 bclk needed

[Overcast]

Re: GIGABYTE Latest Beta BIOS

Do not want even to try?
Actually, i have issues on 4,5 ghz on 6400, cant boot normally when raise bclk over 150. On 150 and 4,0 everything is ok.
Can you try it, if there is same problem?
If so, then i can say its all gigabyte problem. I have z170-d3h, our boards have similar VRM.

Actually, you have 6500, maybe its not the same as my 6400 with 167 bclk needed

[email protected]? Delidded?

[Eagle_i_am]

Re: GIGABYTE Latest Beta BIOS

[email protected]? Delidded?

No. Actually, its ok for skylake, because of 65w tdp
Have ~65C on load with gammax s40 as cooler