If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
with "SataDriver" module missing, I can't install windows 8 in full UEFI mode(csm support=off) raid0, so I flashed f12j bios again
If you feel adventurous, I suppose you could rip the SataDriver out of the previous uefi image and insert it into the new version and see if that just works. I guess that would be more on topic for the neighbor thread for modded gigabyte bios, though. :)
Despite its name, the SataDriver is specifically for booting off the Intel controller in RAID mode, right?
If you feel adventurous, I suppose you could rip the SataDriver out of the previous uefi image and insert it into the new version and see if that just works.
Already did that and it didn't work. But I didn't tried further, because even if I succeed, I still won't have the ultrafast boot option.(and I really like the ultrafast option)
Just got hold of the GA-Z97X-UD5H, updated the BIOS to the F8b beta version and have noticed a minor bug. If you try to exit BIOS without saving, I get a B1IntializeLibrary failed 0xc000009a error and have to reset the system to get up and running again.
Just got hold of the GA-Z97X-UD5H, updated the BIOS to the F8b beta version and have noticed a minor bug. If you try to exit BIOS without saving, I get a B1IntializeLibrary failed 0xc000009a error and have to reset the system to get up and running again.
I get that occasionally as well. Doesn't happen often enough to bug me, I guess.
BTW I'm not sure it's only this BIOS as I've seen it on and off since the board's release.
Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
hi, maybe some can help me,
i have the mother GA-X79S-UP5, and the bIOS update is F4, but the SAS port dosent work.
y connect sata disk, but not appeare,
this sas port is only for RAID?
THEN i coonect 4 disk 1.5tb seagate, for RAID0, but didnt work as well. didnt appeare.
Comment