If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
thank for your help.
So we update the bios to 13s succefully.
When we put ctrl+F11 > it is a access to
Disk / RAID status
Smart Backup Config
And when we enter in the bios normally (with the DEL), ohoh, it is different!
And in the Miscellaneous Settings, we have option Virtualization Technology set to Enabled :-)
Ok but apparently, the OS (Windows Server 2012) don't see the VT (see screenshot)...
We must reinstall the OS from scratch ?
And, in the bios, is there a possibility to see the boot order option (and to disable the gigabyte screen) ?
Thank you very much.
Regards
Piet
Hello,
first forget the sentence : "And, in the bios, is there a possibility to see the boot order option (and to disable the gigabyte screen) ?"
And we made a fresh OS install (Windows 2012 Server) with the new bios (amazing your modifications :-)
And we desactivate the Virtualization Technology, save the bios, restart, and enabled the Virtualization Technology, save and restart again.
Now in VirtualBox we can see the 64bits OS, with Securable it is ok, and with Intel Processor Identification Utility it is ok too (see my screenshot). Wonderful wonderful wonderful !
No,is not joke.......sorry,I have only F16c here,atm.
ok mate, when Gigabyte give us not this bios... 0 Problem, both BIOS (F16c Date: 28.5.2013 / F15 Date: 31.5.2013) - (GA-Z77X-UD5H) have Bugs with Fastboot and OS Type=Win8 Option, DVID manuell and low DDR Ram Voltage,
NT = 0, Power on und see the bug... Voltage etc. wrong, they wont not fix this, Gigabyte make a bad joke ! German support knows this bugs, give not a new Bios... sure next Board asrock or asus or msi, never gigabyte.
Maybe Ace still keep modded BIOS (or I will ask tmr HQ).
I already sent a ticket to Gigabyte support, but I am pretty sure they will tell me that they either don't support betas or just don't know what am I talking about :D
I already sent a ticket to Gigabyte support, but I am pretty sure they will tell me that they either don't support betas or just don't know what am I talking about :D
I just checked and I do not have that bios sorry.
Main Rig Gigabyte z87x-OC
Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
HiS ATI HD 6950
Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Supremacy Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Could someone hook me up with a UEFI BIOS for my z68x-ud7-b3? I flashed a p67a-ud7-b3, so I'm unsure if that would be a problem. I seen other bios's but they were pretty old. Thanks in advance.
F7 6.09 MB 2013/08/05 Asia China America Europe Europe(Russia) : FTP / Http 1.Support PCB ver 1.0/1.1
2.Improve PCIE-E compatibility
(Note) The USB driver must be updated in advanced.
motherbroads have not added the support for PCI-E 1.0a. ? why ?
We have been reported by some users that the TBS card can't be detected in a new PC, this is
because our new PCI-E card uses NXP 7160 bridge, and NXP7160 is PCI-E 1.0a, so some
motherbroads have not added the support for PCI-E 1.0a.
please this third tbs card i get and i dont need it damage again any solve ?
Could someone hook me up with a UEFI BIOS for my z68x-ud7-b3? I flashed a p67a-ud7-b3, so I'm unsure if that would be a problem. I seen other bios's but they were pretty old. Thanks in advance.
z68x-ud7-b3 don't have UEFI BIOS.If you need unlocked BIOS for Ivy...use F11a
Im going try Z77-D3H-F21.. Didnt try 20a because there are still problems with compatibility, and I was buying new GPU.. needed to know if works well... Anyway F19i buggy..
Let you know.
Comment