Re: GIGABYTE Latest Beta BIOS
Hi,
Could you gurus help me out? I've been running my GA-P67A-UD7-B3 board(i7-2600k) so far with F2 BIOS, and been stable at 4.5, with these settings:
CPU Clock Ratio => 45
Real-time ratio changes in OS => enabled
Turbo => disabled
Internal CPU PLL Overvoltage => auto
CPU Enhacned Halt (C1E) => disabled
CPU EIST Function => disabled
C3 / C6 State Support => disabled
CPU Thermal Monitor => disabled
Load line calibration => level 1
CPU Vcore => ~1.38
Now I decided to update BIOS to F6, but what I realized is that there are now 10 levels of Load line calibration. And add to that I cannot get my system to run stable with the same settings as with F2.
Is there something I should change now that I moved to F6, is F2 LLC-level1 == F6 LLC-level1 or is there some differences? Meaning now I should use level 3 etc?
Very annoying
Hi,
Could you gurus help me out? I've been running my GA-P67A-UD7-B3 board(i7-2600k) so far with F2 BIOS, and been stable at 4.5, with these settings:
CPU Clock Ratio => 45
Real-time ratio changes in OS => enabled
Turbo => disabled
Internal CPU PLL Overvoltage => auto
CPU Enhacned Halt (C1E) => disabled
CPU EIST Function => disabled
C3 / C6 State Support => disabled
CPU Thermal Monitor => disabled
Load line calibration => level 1
CPU Vcore => ~1.38
Now I decided to update BIOS to F6, but what I realized is that there are now 10 levels of Load line calibration. And add to that I cannot get my system to run stable with the same settings as with F2.
Is there something I should change now that I moved to F6, is F2 LLC-level1 == F6 LLC-level1 or is there some differences? Meaning now I should use level 3 etc?
Very annoying
Comment