If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thats weird, I haven't noticed any issues here. I have G-Skill TridentZ RGB 3600MHz with XMP enabled. The only thing I have noticed is that the debug code on the motherboard changes from AO to 25 sometimes after it has booted into Windows, sometimes it can stay for days at AO and suddenly it says 25
My pc after a boot says with ms faststart off AO, but on a normal boot wirh ms faststart I get 04 if I hold shift on shutdown I then get 05 then will boot AO. Or on a restart, I've never got 25.
I have been looking in to the memory, an if I put memory in performance my ram go's lumpy in games when at full load and hwinfo shows it's load at 97.8%
Thats weird, I haven't noticed any issues here. I have G-Skill TridentZ RGB 3600MHz with XMP enabled. The only thing I have noticed is that the debug code on the motherboard changes from AO to 25 sometimes after it has booted into Windows, sometimes it can stay for days at AO and suddenly it says 25
Perhaps you have a problem with RAM modules. I have no problems with post codes in my Z390 Aorus Master with two sets of G.SKILL Trident Z Neo F4-3600C16D-32GTZNC on the F11k GK BIOS.
Perhaps you have a problem with RAM modules. I have no problems with post codes in my Z390 Aorus Master with two sets of G.SKILL Trident Z Neo F4-3600C16D-32GTZNC on the F11k GK BIOS.
Loving this new F11IGK with RGB Fusion i was having temp issues until i told them about the vcore bug returning. now i don't see temps higher than 60c under load with my 9900K
For some reason F10g for the Ultra Z390 needs more voltage to get my 5ghz stable on 9900k. Not a big difference but still its hot enough as it is already.
Can I beg someone to upload f10b again for me? I can't find it anywhere.
I also cannot seem to access my backup bios, no matter what settings I dial in the pc just posts anyway, which is nice but I have no way of forcing access to my backup bios. I don't have a switch like the Master
For some reason F10g for the Ultra Z390 needs more voltage to get my 5ghz stable on 9900k. Not a big difference but still its hot enough as it is already.
Can I beg someone to upload f10b again for me? I can't find it anywhere.
I also cannot seem to access my backup bios, no matter what settings I dial in the pc just posts anyway, which is nice but I have no way of forcing access to my backup bios. I don't have a switch like the Master
Hi stasio. I just got a RTX 3080. Im using a x570 aorus pro. I've got 3700x. Ever since getting the gpu my sound card audio channels keep switching. I've disabled pcie4 for now to fix it. Are there any Aorus pro bios updates available past f30?
Loving this new F11IGK with RGB Fusion i was having temp issues until i told them about the vcore bug returning. now i don't see temps higher than 60c under load with my 9900K
Do you mean BIOS F11kGK? AFAICT there is no F11lGK with RGB Fusion. There is the final BIOS version named F11l with no RGB Fusion baked in. If you do have F11lGK how about a link?
Intel Core i9-9900K @ 5.15 GHz | Gigabyte Z390 AORUS MASTER | Corsair 1000W PSU | Corsair H115i CPU Cooler | Corsair 32GB RAM | EVGA RTX2080 Ti FTW3 11GB | BenQ PD3200U 32" 4K LCD | 3-512GB Samsung 970 PRO NVMe | 2TB Samsung 860 EVO | 1TB Sabrent Rocket NVMe | Windows 10 Pro | BIOS F11jGK
Do you mean BIOS F11kGK? AFAICT there is no F11lGK with RGB Fusion. There is the final BIOS version named F11l with no RGB Fusion baked in. If you do have F11lGK how about a link?
Comment