No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse

TrebleTA
Member
Last Activity: 01-24-2023, 09:00 PM
Joined: 02-19-2014
Location: England
-
Also if main bios is corrupt, you can flash the backup over the main bios while in the backup bios. Your have too google it. For the key command
-
If you want to change from UEFA to non uefi, I would set windows to boot in to safe mode, via msconfig, then go in to bios and change to non uefi, boot in to windows safe mode, then disable safe mode then boot back to windows and your now non uefi.
It's been a while since I did the above but use...Last edited by TrebleTA; 11-13-2022, 07:17 AM.
Leave a comment:
-
If your getting that kind of temps, the cpu and heat sink, are not set correctly. On idle I get 23c on gamming i hit 50c
Leave a comment:
-
Use my setting for the z390 master, and anything your unsure of just ask....My Bios Settings for my I7 9700k, on a Gigabyte Z390 Master Rev 1.0 bios F11L GK Please advice me if I have done anything wrong or am missing anything recommended... All settings are optimized defaults unless I have listed below. Updated for my f11o Gk settings *Tweaker* Enhanced Multi Core Performance(EMCP) = Disable. CPU
Leave a comment:
-
Yes that voltage is for my system. Every system-CPU is different, try at 0 run the test if all ok then -10 keep doing so untill you crash, then add 5 and test again if stable etc
Leave a comment:
-
Well you have to increase voltage for it, so would start at 0 if ok try -10
ratios it's up to you, I try keep how was by default just adding to it, also at 5.2 I could not get stable at right temps and voltage.
p.s the master will be different from your board slightlyLast edited by TrebleTA; 04-11-2022, 06:19 AM.
Leave a comment:
-
Try winraid forum, there is guides on there that may help you
Leave a comment:
-
Increase the dynamic vcore to -45 if bad try -35. At mo I'm using -45 or -35 that the only bit affecting the oc of the cpu. Keep eye on vrout in hwinfo.
but it depends too on what bsod error. Also the z490 master has a win 11 serial io driver, that i was giving me a wea error from the z390 driver...Last edited by TrebleTA; 04-08-2022, 04:48 AM.
Leave a comment:
-
Not sure why your getting that error am running win 11 beta no problems, it sounds like a drivers issule maybe serial io or wifi,bluetooth...Last edited by TrebleTA; 04-06-2022, 04:45 PM.
Leave a comment:
-
As stated by the bios on the gigabyte web site you can not roll back the bios from this new capsule bios. If you have problems with the new bios like secure boot, go to gigabyte e-Support and tell them only way to fix any issues with the bios.
Also try my guide thread and look for how I...Last edited by TrebleTA; 01-21-2022, 05:27 AM.
Leave a comment:
No activity results to display
Show More
Leave a comment: