If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I've been searching far and wide regards the TERIF memory timing bug when it comes to the Gigabyte Z390 Aorus Master motherboard.
So far I understand that I will be needing to flash bios F9 to be able to change TERIF?
Unless I go for Bios F11c which gives me a -100mhz oc penalty to the cpu?
Also, did not find any information regards the F11f bios, anyone tested it yet? or know if it fixes the TERIF bug?
Currently running F10 and only issue regards my use is the TERIF Bug...
In case you have time still with the Z490 crunch,
F11f on Z390 Aorus Master is using the "incorrect" code branch. Menus missing again, tREFI bug, etc.
F11e was on the correct code path.
Good luck with the hard launch, Stasio! And excellent press video done by GB!
Hi. Tell me, will it be possible to configure the RTL and IOL block when RAM overclocking on the z390 aorus Elite Board? (Translated by the translator)
I have just been provided with Z390 M Gaming F9J 15/05/20
stating that it fixes my issues
I dont think they want it shared as the bios has a customer code embeded in it
I Have just tested it
Fixed
Serial Port showing after S3 Suspend to ram
PCIEX4 = Sabrent Rocket 1TB = Not Detected by the os when Package C State Limit = C10 in bios
Not Fixed PCIEX1_2 = Corsair MP510 480GB = Not Detected by the os when Package C State Limit = C10 in bios
PCIEX1_1 = Intel Optane M10 16GB Fine (I Suspect its only fine due to a quirk of it being an Optane drive and if i swapped the MP510 around it would do the same)
What ever was done on PCIEX4 needs doing also on PCIEX1_2 + PCIEX1_1
The only other things i have noticed
In Boot there's a new option
CFG Lock = Disabled (Configure MSR 0xE2[15], CFG Lock bit)
System Info.
Customer Code is new i presume unique to my bios build but unsure
Access Level = Administrator (this is missing in F9j but was present in F9h)
I have just been provided with Z390 M Gaming F9J 15/05/20
stating that it fixes my issues
I dont think they want it shared as the bios has a customer code embeded in it
I Have just tested it
Fixed
Serial Port showing after S3 Suspend to ram
PCIEX4 = Sabrent Rocket 1TB = Not Detected by the os when Package C State Limit = C10 in bios
Not Fixed PCIEX1_2 = Corsair MP510 480GB = Not Detected by the os when Package C State Limit = C10 in bios
PCIEX1_1 = Intel Optane M10 16GB Fine (I Suspect its only fine due to a quirk of it being an Optane drive and if i swapped the MP510 around it would do the same)
What ever was done on PCIEX4 needs doing also on PCIEX1_2 + PCIEX1_1
The only other things i have noticed
In Boot there's a new option
CFG Lock = Disabled (Configure MSR 0xE2[15], CFG Lock bit)
System Info.
Customer Code is new i presume unique to my bios build but unsure
Access Level = Administrator (this is missing in F9j but was present in F9h)
I've seen Access Level=Administrator in every single Aorus Master Bios (as far as I know).
CFG Lock =disabled allows you to set the C-state limit manually in windows or Linux. Enabled locks the limit to what it is set to in the BIOS. (Throttlestop 8.75 beta 4 can set the C-state limit).
Wonder where the AGESA 1.0.0.5 bios updates for X570 are.
According to GB BIOS testing team 1.0.0.5 has some issues.
Some X570 BIOS updated today with AGESA 1.0.0.4p......next Beta BIOS coming with AGESA 1.0.0.6
Comment