Announcement
Collapse
No announcement yet.
GIGABYTE Latest Beta BIOS
Collapse
This is a sticky topic.
X
X
-
Re: GIGABYTE Latest Beta BIOS
Originally posted by VimesUK View PostI think that they have needed a rest since the last couple of BIOS updates for that board....! Perhaps the whole 390 range needed to be looked at as I think that it affected others as well.
Comment
-
Re: GIGABYTE Latest Beta BIOS
Originally posted by Jasper Levi View PostAh, well, I guess it makes sense. Hope they come back stronger. If you have the F11e BIOS, can you please share it? I've read that that version is the most stable one they put out. Thanks in advance...
Dropbox link for unmodified F11e for Master 390 board.....
Dropbox - Z390AORUSMASTERf11e.zip - Simplify your lifeLast edited by VimesUK; 06-23-2020, 10:18 AM.Gigabyte DS3H Z77 board (being repaired) GA-Z77X-UD5H. 3570k CPU. 2x4GB Corsair LP DDR3 memory. Asus GTX 670 2GB GPU.
Comment
-
Re: GIGABYTE Latest Beta BIOS
Originally posted by VimesUK View PostI've uploaded it to dropbox, it was shared with me within this thread......
Dropbox - mod_Z390AORUSMASTER_f11e.zip - Simplify your life
can't find the original post tho. The above is the modified one.
The below is the std test one from here....
Dropbox - Z390AORUSMASTERf11e.zip - Simplify your life
Comment
-
Re: GIGABYTE Latest Beta BIOS
Originally posted by Jasper Levi View PostThanks so much for the share. Can you tell me what the modifications are, in the modded one?
But take a look at this one....
(Gigabyte Z390 AORUS Owners Thread) - Page 881 - Overclock.net - An Overclocking Community
you have the info there for that modified version. The modified ones can't be flashed with Qflash. Use at your own risk, if you decide to.
I have just used the std test one from this thread, not modified and flashed through QFlash.Last edited by VimesUK; 06-18-2020, 03:40 PM.Gigabyte DS3H Z77 board (being repaired) GA-Z77X-UD5H. 3570k CPU. 2x4GB Corsair LP DDR3 memory. Asus GTX 670 2GB GPU.
Comment
-
Re: GIGABYTE Latest Beta BIOS
Originally posted by JogDive View PostAre the black screens of Z390 Aorus Master 11j related to Nvidia gfx cards?
Falkentyne, did you get a chance to dig in into Z390 11j for quality testing?
Comment
-
Re: GIGABYTE Latest Beta BIOS
Originally posted by VimesUK View PostNo, as I couldn't find the original post for that one.
But take a look at this one....
(Gigabyte Z390 AORUS Owners Thread) - Page 881 - Overclock.net - An Overclocking Community
you have the info there for that modified version. The modified ones can't be flashed with Qflash. Use at your own risk, if you decide to.
I have just used the std test one from this thread, not modified and flashed through QFlash.
EDIT: I obviously was in too much of a hurry to see that you had already said I can't flash it with Q-Flash...
Comment
-
Re: GIGABYTE Latest Beta BIOS
Something strange but pleasantly surprising with the F11j version BIOS for Z390 Aorus Master. Since someone on this thread had posted that he was able to access the BIOS settings, I was a little suspicious that it actually did work. So I flashed it, and was then actually able to enter the BIOS. I will put everything that I did in sequence here, and let's see if someone else is able to get in as well...
1. Straight after the BIOS flash I pressed the 'Del' key and was greeted by the black screen
2. I then shut the machine down, connected a HDMI cable to the onboard HDMI-out, the other end to my monitor (ASUS PB287Q) and started the machine back up. Pressed 'Del'. Still a black screen
3. Shut the machine down. Connected the HDMI cable to the single HDMI port on my graphics card (Radeon 5700 XT). Started her up. 'Del' key again led to black screen.
4. I then pressed the 'End' key and hey, the display cambe back on with the Easy version of the BIOS displayed.
5. After that I was able to go into the Advanced mode of the BIOs, make my selections, save profiles and reboot.
6. After that, I set the display back to DisplayPort, and have had no issues whatoever to get back into the BIOS settings
Anybody else with the Aorus Master, and have a spare HDMI cable lying around, can maybe try the steps above and see if they are also able to get into the BIOS.
All the best!
Comment
-
Re: GIGABYTE Latest Beta BIOS
Good result for you there. I remember testing that BIOS with HDMI, DP and DVI, I also pressed each button within that "block" of keys when the black sreen appeared. No change for me.
Perhaps it will help someone, if they feel the need to try it. Well done for sharing.
Hopefully they will fix the issues with the BIOS, been a while tho.Gigabyte DS3H Z77 board (being repaired) GA-Z77X-UD5H. 3570k CPU. 2x4GB Corsair LP DDR3 memory. Asus GTX 670 2GB GPU.
Comment
-
Aorus Xtreme TRX40
Im on bios f4d and now that upgraded to it my cpu has been acting crazy. Sometimes cpu downclocks to 3.5ghz and the temps are 38C. Cpu wont boost past 4.3 but holds for like 1 sec. Stays at 3.8ghz or below never hits 4.5 on single core. Also memory timings are an issue too. Had them clocked at 15 15 15 39 4000mhz checked on memcheck stable they are all samsung b die now i cant even get them stable at cl18. any beta bios?
Comment
-
Re: GIGABYTE Latest Beta BIOS
Something sure seems up at gigabyte, there not replying to messages! Bios's getting worse. Feeling a bit let down by them, it's been over a year and my board is still not working perfect. Rgb stays on when you shutdown, go to sleep rgb messes up again, fan headers that don't do as told all time, voltage that is incorrect. Come on sort it out Gigabyte
Comment
-
Re: GIGABYTE Latest Beta BIOS
Originally posted by TrebleTA View PostSomething sure seems up at gigabyte, there not replying to messages! Bios's getting worse. Feeling a bit let down by them, it's been over a year and my board is still not working perfect. Rgb stays on when you shutdown, go to sleep rgb messes up again, fan headers that don't do as told all time, voltage that is incorrect. Come on sort it out Gigabyte
Comment
Comment