If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
(When updating from legacy to UEFI, use only the utility attached to your BIOS file)
Note:
Some GIGABYTE utilities are not supported under UEFI BIOS architecture.
Please remove Smart6, Dynamic Energy Saver, Smart TPM, and Touch BIOS utilities before updating the BIOS.
- 31.Jul 12
So that means the UEFI Bios of GA-P67A-UD3R-B3 will release?
I think i had it once where my tv just went black i couldnt see n e thing. Plenty reboot loops aswell. I checked both bioses (F12) one of them (Backup Bios) allowed me to change BCKL the Main Bios had the BCKL option completely missing. I then CMOS reset went back into bios, it was still missing. In the end i re-flshed F12 to Main Bios, then hey presto the BCKL option appeared. I then set my OC re-booted. Im still testing it now, Ive not had any cold start loops yet. F12 sleep works (still testing thumbs up) Gona test proper tonight for cold start loop.
****** both bioses on F12 (No need to set them exact the same) my backup bios is just default settings & Main bios is wid OC settings) with i7 2600K my vtt & imc is on AUTO at the mo.
***** so far running fine wid F12 i did have to set IMC & VTT 1.045v & 1.050v ..Extreme phase...Fast voltage..few notches up on vcore & DRAM...I think F12 is best wid I7 2600K so far. Sleep working. Just cant load profiles from USB. Im prayin the cold boot loops are gone also.
Well my cycle boot problem is back ffs... god I hate this motherboard!!!!!!!!!
Different bios wont fix it, the power saving setting dont fix it... nothing seems to fix it...
Intel i7 2700K (@4.6Ghz) - 8GB Corsair - Windows 7 64Bit - Gigabyte GA-Z77X-UD3H - Corsair Force 3 SSD 120GB
Gigabyte GTX680 OC - Benq 120hz LED Monitor
Comment