If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
For X58-UD4P owners: If you have had issues getting an i7 920 stable with >200mhz BCLK with HT on and you ram at >1600mhz, has F12 helped at all?
With HT off it is no problem but I still can't get a 200bclk stable with HT on and my ram at 1600mhz. I have tried 19x,20x,21x for multipliers with no luck. If i relax the timings quite a bit (from 8-8-8-24 to 10-10-10-30 or so) it will be stable but I get better performance with my memory down one notch at 1300mhz 6-6-6-14.
The latest f4 bios for the ga-x58a-ud3r reboots instead of shuting down on win 7 64bit I own 2 of these boards different gear in both systems suffer the same issue
I have the same board with the latest bios F4 and I don't experience this issue, my system shuts down properly.
Case: Antec Three Hundred Two
MB: GA-X58A-UD3R (rev. 1.0) F8B (Realtek LAN ROM v2.56, Intel(R) RAID ROM v12.7.0.1936, JMicron 1.07.28, Marvell 88SE9128 Bios v1.0.0.1033/FW 2.2.0.1125)
PC: Intel Core i7-920 D0 | 6GB DDR3 Corsair Dominator @1600 (8-8-8-24) | Samsung 830 256GB SSD + 2x1TB HDD's | NVIDIA GTX 660 | Samsung T260 26"
OS: Windows 7 Ultimate SP1 x64 | Windows 8 Pro x64 | Mac OS X Mountain Lion 10.8.4 | Ubuntu 13.04 Gigabyte apparently stopped releasing BIOS updates forX58 series
Unfortunately, the GA-790FXTA-UD5 board is not listed in the bios overview at the start posting. I am searching for the bios F2 update. I did find the F3A update which has solved several issues but apparantely, there is also an F3F available somewhere.... Any idea where to download it
Unfortunately, the GA-790FXTA-UD5 board is not listed in the bios overview at the start posting. I am searching for the bios F2 update. I did find the F3A update which has solved several issues but apparantely, there is also an F3F available somewhere.... Any idea where to download it
Ask Hicookie(or guys posting there) to reupload BIOS F3f,because RS link 10 times expire here:
Thanks for the update. I did find this topic and registered myself. However, by some reason I cannot post on this forum nor can I send a message to Hicooki....
Thanks for the update. I did find this topic and registered myself. However, by some reason I cannot post on this forum nor can I send a message to Hicooki....
Any alternatives are very welcome!
PM to biohead there(when you can),he is also from The Netherlands.
Great, you're the best, thanks for the good and quick help
Just flashed the mobo and F3f installed successfully! I hope this will solve the issue I am facing regarding SATA-3 usage. By some reason, I cannot get Windows7 x64 version installed on my WD1002FAEX
Caviar Black 1TB SATA3 connected to the SATA-3 port.
Versionn F3a solved the Auto Clock feature of AMD Overdrive.
Comment