If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Took me 2 reboots to encounter the first BSOD with X670E Master F9c BIOS. I am really getting pissed at this point. Yea I know this one is actually beta but F8 doesnt work any better for me either. AM5 is just an unfinished platform EVEN 5 months after release.
AM4 is still not finished, either.
I am on a BIOS from 2021. Every subsequent version has been less stable. USB issues are still not 100% fixed.
I've been using F9C for about a week and have not had a single crash yet. My ethernet port still doesn't work but otherwise this seems like a pretty stable release.
Have you tried to unplug the power cord leave it out for 1min and plug it back in. I have a Intel 11gen that I have to do it with. You can try it doing that fix on Reddit.
I was experiencing significant performance degradation with this driver, my Cinebench r23 multi core scores were down to ~14333 from ~15123 in the same conditions (5% difference).
How I confirmed the observation: started Windows normally, did several Cinebench runs with ?5.02.19.2221, uninstalled chipset software from Installed Apps, installed 4.11.15.342, restarted, did several Cinebench runs again.?
System: Ryzen 5800x @ 4850MHz / B550 / 64GB 16-20-20-40 / UCLK 1600MHz / FCLK 1900MHz
??
I don't use PBO/CO, but even with enabled PBO (142, 95, 120) & CO (all -30, two best -15) the scores on ?5.02.19.2221 were similar to stock 4.11.15.342 and killing all the extra applications/processes (razer, hwinfo, intell driver assistant, etc.) almost didn't affect the result - on 4.11.15.342 quitting all these apps helps to gain extra 250 points (up to ~15388).
?
Windows 11 with latest patches boots to blank screen with no login or cursor. I have 3900x and nvidia 1660 super. Had to revert back to amd chipset driver 3.10 from Gigabyte site for my B550AX board.
seems like F9 is final now. It's laying on their servers but not on official website yet. Anyway, I just flashed it. Lets see if this one is actual usable.
First thing I noticed is that we have high res on boot screen now lol.
seems like F9 is final now. It's laying on their servers but not on official website yet. Anyway, I just flashed it. Lets see if this one is actual usable.
First thing I noticed is that we have high res on boot screen now lol.
Gigabyte really knows where the priorities are /s
whoops, totally forget to mention the model.. X670E Master I was talking about. Anyway, BIOS F9 seem to have the same problems as F9c even worse for me, cause now I regulary loose my LAN port all of the sudden in windows, then I have to reboot to make it usable again.
It's still AGESA 1.0.0.5C
whoops, totally forget to mention the model.. X670E Master I was talking about. Anyway, BIOS F9 seem to have the same problems as F9c even worse for me, cause now I regulary loose my LAN port all of the sudden in windows, then I have to reboot to make it usable again.
It's still AGESA 1.0.0.5C
Yeah, just tested as well and my X670E Master still has the stability issues, especially on boot.
Hi. Maybe someone can help me. I have GA-P67A-UD4-B3 with GA-P67A-UD3-B3 U1D version of UEFI. It performed perfectly with my memory sticks: 2x 2Gb, 1x 4Gb and 1x 8Gb. But after sudden reboot it stopped working with 4gb and 8Gb RAM sticks. Oddly enough, it only happens at U1D UEFI from UD3 motherboard, but all my memory boots fine with F9 BIOS from UD3, and F8 native BIOS (just like with any other BIOS version i think). I tried CMOS cleaning, reflashing BIOS and UEFI many times, I even unsoldered my BIOS memory flash chips and replaced them with other hand-flashed ones. I don't know what else to do because I really need UEFI on this board. Unfortunately, I haven't POST-card to see what codes I get when I get stuck on boot.
whoops, totally forget to mention the model.. X670E Master I was talking about. Anyway, BIOS F9 seem to have the same problems as F9c even worse for me, cause now I regulary loose my LAN port all of the sudden in windows, then I have to reboot to make it usable again.
It's still AGESA 1.0.0.5C
I've been using 10a for a few days now, and it comes with a noticeable reduction in post time supposedly due to AGESA 1.0.0.6, but still a broken LAN port. Now that the logo on post is high res it looks really small at 4K so I'm going with that being a downgrade. All else, I have not had any crashing issues or anything else major since 9c. I was also able to successfully update the bios without having to disable EXPO this time around so that is a nice bonus too.
Comment