OK, I searched everywhere on google but could not find any reason or solution as to why this is happening. I have a GA-P35-S3G motherboard which I have been overclocking for a month probably. The problem is that whenever I shutdown my computer & start it, my PC reboots twice or thrice even before showing the graphic card screen & then all my overclock values are replaced by the default values. I always have to press Del then, load the saved profile settings from CMOS & save the settings. Only after doing this overclocks my PC. This has started occurring just 4-5 days ago. Before that, my PC used to start properly with all the overclock settings. I have already run memtest & my RAM is fine.
Announcement
Collapse
No announcement yet.
Overclock values reset after every fresh start
Collapse
X
-
Overclock values reset after every fresh start
Intel Core i5 2500k
GA-Z68XP-UD4 Rev 1.3 F6
Corsair Force GT + WD Caviar Black 1TB + Segate 500GB HDD
Corsair 8GB RAM
MSI GTX 970 3.5GB + 0.5GB graphic card
Dell U2312HM widescreen monitor
Windows 8.1 64 bitTags: None
-
Re: Overclock values reset after every fresh start
What happens if you set Performance Enhance to Standard?GA-P35C-DS3R Rev2.0 F11 bios, E8200 (@3.0Ghz), OCZ DDR3 PC3-10666 Reaper 4GB (@1200Mhz), Xonar D1, 8800GTS 512, Corsair HX520 (Single 12volt line, Max 40A), WDC 3200aaks/5000aaks in AHCI mode, Vista 64 Premium.
-
Re: Overclock values reset after every fresh start
That sounds exactly like what it's supposed to do, if it's configured with a bad setting or two. If you list your BIOS settings, someone can probably help you.Gigabyte P35-S3G . 50mm Fan on MCH +0.2v
Intel E6500 (9 x 420) 3780mHz 1.33125v
G.Skill 4x1GB PC2-6400-NQ 840mHz +0.2v
Gigabyte HD4850 . Acer X223W . Acer X193W+
Rosewill RP500-2 . WD WD3200AAJS . Masscool 8WA741
Comment
-
Re: Overclock values reset after every fresh start
My understanding, too:
two reboots = normal procedure to accomodate certain parameter changes;
three reboots = 'bad parameters' reset to defaults response...
As noted - you will be able to get it fixed here - find one of the 'empty parameter list' templates here, and post your settings...
Good luck!
Bill
Comment
-
Re: Overclock values reset after every fresh start
Ok figured it out. The CPU EIST function was missing in the bios which is really strange. So I just did a 'Load Optimized Defaults' before overclocking & now my PC has rebooted with the overclock settings implemented. Thanx guys for showing ur appreciation in this.Intel Core i5 2500k
GA-Z68XP-UD4 Rev 1.3 F6
Corsair Force GT + WD Caviar Black 1TB + Segate 500GB HDD
Corsair 8GB RAM
MSI GTX 970 3.5GB + 0.5GB graphic card
Dell U2312HM widescreen monitor
Windows 8.1 64 bit
Comment
-
Re: Overclock values reset after every fresh start
So you good to go or not? If you need help please do fill this in with what you are using and I will advise >>>
This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours
Code:Robust Graphics Booster___________ [Auto] CPU Clock Ratio ____________ [8] Fine Clock Ratio ____________[0.5] CPU Host Clock Control_ [Enabled] CPU Host Frequency (MHz)__________ [450] PCI Express Frequency (Mhz)_______ [100] C.I.A. 2__________________________ [Disabled] System Memory Multiplier (SPD)____ [2.00] DRAM Timing Selectable_______ SPD __ [Manual] Performance Enhance = [Standard] CAS Latency Time________________ ? Dram RAS# to CAS# Delay_________ ? Dram RAS# Precharge Delay_______? Precharge Delay (tRAS)__________ ? ACT to ACT Delay (tRRD)_________ ? Rank Write to READ Delay________ ? Write to Precharge Delay_________ ? Refresh to ACT Delay______________ ? Read to Precharge Delay__________ ? Static tRead Value_______________ Static tRead Phase Adjust________ [Auto] System Voltage Control____ [Manual] DDR2 OverVoltage Control__ [+0.300V] PCI-E OverVoltage Control_ [+0.1V] FSB OverVoltage Control___ [+0.1V] (G)MCH OverVoltage Control [+0.1V] CPU Voltage Control_______ [1.25] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC Integrated Peripherals Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
Comment
-
Re: Overclock values reset after every fresh start
Hey, looks like my problem has not solved yet. The EIST function has again disappeared. Why has this happened again ? Anyways u were asking for my settings....here they are:
Robust Graphics Booster___________ [Fast]
CPU Clock Ratio ____________ [9]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [333]
PCI Express Frequency (Mhz)_______ [100]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ 4
Dram RAS# to CAS# Delay_________ 4
Dram RAS# Precharge Delay_______4
Precharge Delay (tRAS)__________ 12
ACT to ACT Delay (tRRD)_________ [Auto]
Rank Write to READ Delay________ [Auto]
Write to Precharge Delay_________ [Auto]
Refresh to ACT Delay______________ [Auto]
Read to Precharge Delay__________ [Auto]
Static tRead Value_______________[Auto]
Static tRead Phase Adjust________ [Auto]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.1V]
FSB OverVoltage Control___ [Normal]
(G)MCH OverVoltage Control [+0.1V]
CPU Voltage Control_______ [1.325000V]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Disabled]
CPU EIST Function.........................: [Disabled] (again disappeared)
Integrated Peripherals
Legacy USB Storage Detect___________________[Enabled]Intel Core i5 2500k
GA-Z68XP-UD4 Rev 1.3 F6
Corsair Force GT + WD Caviar Black 1TB + Segate 500GB HDD
Corsair 8GB RAM
MSI GTX 970 3.5GB + 0.5GB graphic card
Dell U2312HM widescreen monitor
Windows 8.1 64 bit
Comment
-
Re: Overclock values reset after every fresh start
Hmm Eist should not be disappearing at all. Are you using the latest BIOS? If so did you load and apply optimized defaults and save/reboot after you flashed? If not you must do this after a flash.
If you are not using the latest BIOS please do update it as it may very well help solve your issue. Please read this Qflash guide, and DO NOT USE @BIOS>>>
Here is your boards BIOS page >>>
GIGABYTE - Support - Motherboard - BIOS - GA-P35-S3G
Strangely I do not find other revisions, so that must be the only one made of that model.
As for your settings, here would be some optimal better performing ones if you like, and as you said you loose your settings every time they may be incorrect in Auto. Likely if your ram tests fine you should still set 2.0V as it may help, and your CPU voltage may not be enough for your overclock so it fails
Robust Graphics Booster___________ [Fast]
CPU Clock Ratio ____________ [9]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [333]
PCI Express Frequency (Mhz)_______ [100]
System Memory Multiplier (SPD)____ [2.40] = 800Mhz ram speed
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ 4
Dram RAS# to CAS# Delay_________ 4
Dram RAS# Precharge Delay_______4
Precharge Delay (tRAS)__________ 12
^^^ Does your ram sticker say 4-4-4-12? Just checking ^^^
Can you give me a link to it please
ACT to ACT Delay (tRRD)_________3-4
Rank Write to READ Delay________ 3-6
Write to Precharge Delay_________4-6
Refresh to ACT Delay______________38-42
Read to Precharge Delay__________ 2-5
Static tRead Value_______________7-10
Static tRead Phase Adjust________ [Auto] << always Auto
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.1V] =1.9V (if you ram is 2.0 or 2.1V it may need at least 2.0, but you said it is fine so you can likely leave)
FSB OverVoltage Control___ [Normal] << may want to add +0.1 for stability here as well
(G)MCH OverVoltage Control [+0.1V]
CPU Voltage Control_______ [1.325000V] << may need more for your overclock
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Disabled] << please always have enabled
CPU EIST Function.........................: [Disabled] (again disappeared)
Integrated Peripherals
Legacy USB Storage Detect___________________[Enabled]
Comment
-
Re: Overclock values reset after every fresh start
I m srry I forgot to update my signature. I m using the F3a version & not F4 because its the only one that allows me to overclock my CPU & none other. I checked the RAM sticker & it says 5-5-5 but this restart problem was occurring even before I tightened my RAM timings & this morning it happened again.
Here are my settings again:
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [9]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [333]
PCI Express Frequency (Mhz)_______ [100]
System Memory Multiplier (SPD)____ [2.40] = 800Mhz ram speed
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ 5
Dram RAS# to CAS# Delay_________ 5
Dram RAS# Precharge Delay_______5
Precharge Delay (tRAS)__________ 18
Can you give me a link to it please
ACT to ACT Delay (tRRD)_________3[Auto]
Rank Write to READ Delay________3[Auto]
Write to Precharge Delay_________6[Auto]
Refresh to ACT Delay____________52[Auto]
Read to Precharge Delay__________3[Auto]
Static tRead Value_______________3[Auto]
Static tRead Phase Adjust________ 0 [Auto]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.1V] =1.9V
FSB OverVoltage Control___ [+0.1V] (as u said)
(G)MCH OverVoltage Control [+0.1V]
CPU Voltage Control_______ [1.365000] << may need more for your overclock
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled] (don't understand y its
disappearing)
Integrated Peripherals
Legacy USB Storage Detect___________________[Enabled]Intel Core i5 2500k
GA-Z68XP-UD4 Rev 1.3 F6
Corsair Force GT + WD Caviar Black 1TB + Segate 500GB HDD
Corsair 8GB RAM
MSI GTX 970 3.5GB + 0.5GB graphic card
Dell U2312HM widescreen monitor
Windows 8.1 64 bit
Comment
-
Re: Overclock values reset after every fresh start
Well I see a huge problem (And likely why you thought F4 did not work) >>>
Static tRead Value_______________3[Auto] << Way to low use 7 or 8 manually set
How about ram sticker for voltages? Can you give me a link to the exact ram?
Comment
-
Re: Overclock values reset after every fresh start
Ok, I Q-flashed the bios properly(load optimized -> Q-flash -> Load optimized) to F4 & tried the same overclock settings that I use in F3a but changed the Static tRead Value to 7/8. The bios did not hold my overclock values.
The Ram cover only says 1.8V. Its a Transcend JetRam DDR2-800 ram. The model name is JM800QLU-2G. Here's the link for the datasheet of this model:
Intel Core i5 2500k
GA-Z68XP-UD4 Rev 1.3 F6
Corsair Force GT + WD Caviar Black 1TB + Segate 500GB HDD
Corsair 8GB RAM
MSI GTX 970 3.5GB + 0.5GB graphic card
Dell U2312HM widescreen monitor
Windows 8.1 64 bit
Comment
-
Re: Overclock values reset after every fresh start
Try static tread 10 for now and refresh to act delay 62. And when you choose your memory multiplier please choose either the one with the 400 or 1600 Strap letter/symbol on it, or one with no symbol on it and see if that helps. Also test out the one with the 333/1333 strap or symbol on it, but the 400 one or none should be more stable
You never said do you have 2GB or 2x2GB of this ram? And can you please post me a Image of CPU-z with the SPD tab selected? Thanks
And just so you know the same settings will not always work in different BIOS versions you may need more or less of any setting between them
Have you tested more vcore, if not try it as well
Comment
-
Re: Overclock values reset after every fresh start
Srry again. I m using only single stick. I tried those values 10 & 62 (rest of the settings in M.I.T same as mentioned in my last post) with SPD multiplier 2.4 but as expected that did not work either. I also cleared the CMOS by shutting down the PC ,then using that jumper method for alteast 25 minutes & finally a Load Optimized Defaults but to no avail. Even the unnecessary features in Power Management & Legacy USB Storage are disabled.
SPD screenshot (no overclock settings):
Screenshot from Memset 3.5:
Last edited by varunb; 11-01-2008, 09:38 AM.Intel Core i5 2500k
GA-Z68XP-UD4 Rev 1.3 F6
Corsair Force GT + WD Caviar Black 1TB + Segate 500GB HDD
Corsair 8GB RAM
MSI GTX 970 3.5GB + 0.5GB graphic card
Dell U2312HM widescreen monitor
Windows 8.1 64 bit
Comment
-
Re: Overclock values reset after every fresh start
What memory multiplier are you using, I mean is it one with a letter or symbol on it?
So are you using the newest BIOS now and not a beta? Is EIST Showing now still?
Static tRead of 3 is still being used, this is a HUGE issue
Try this and see if it helps you any and please move the ram stick to slot one for now >>>
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [9]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [333]
PCI Express Frequency (Mhz)_______ [100]
System Memory Multiplier (SPD)____ [2.40B/1333 strap or no letter/symbol] = 800Mhz ram speed
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ 5
Dram RAS# to CAS# Delay_________ 5
Dram RAS# Precharge Delay_______5
Precharge Delay (tRAS)__________ 18
Can you give me a link to it please
ACT to ACT Delay (tRRD)_________4
Rank Write to READ Delay________6
Write to Precharge Delay_________6
Refresh to ACT Delay____________48
Read to Precharge Delay__________5
Static tRead Value_______________12
Static tRead Phase Adjust________ 0 [Auto]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.1V] =1.9V
FSB OverVoltage Control___ [+0.1V] (as u said)
(G)MCH OverVoltage Control [+0.1V]
CPU Voltage Control_______ [1.365000] << may need more for your overclock
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect___________________[Enabled]
Comment
-
Re: Overclock values reset after every fresh start
1. I m using 2.4 multiplier & it has no +,- or any other symbols. Those symbols are
only present on 4.0 multiplier.
2. EIST disappears if I overclock when using the F3a version.....don't know if it will
disappear after overclocking on F4.
3. Static tRead is 3 when left on Auto & CPU is not overclocked. When I overclock,
then I always change it to values between 7-11 as u told.
I will move it to slot 1 & let u know.Intel Core i5 2500k
GA-Z68XP-UD4 Rev 1.3 F6
Corsair Force GT + WD Caviar Black 1TB + Segate 500GB HDD
Corsair 8GB RAM
MSI GTX 970 3.5GB + 0.5GB graphic card
Dell U2312HM widescreen monitor
Windows 8.1 64 bit
Comment
Comment