i try to over clock but it wont work
Announcement
Collapse
No announcement yet.
overclock the bfg6200
Collapse
X
-
Re: overclock the bfg6200
Originally posted by RenascentMisanthropyDo you know what your doing?
My old XpertVision 6200 AGP (128MB/128bit) would overclock like a demon.
Core: 425mhz
Mem: 680mhz
Back on topic:
Originally posted by zaqwsxi try to over clock but it wont work
When you say it 'wont work" could you be a little more specific ....... what won't work?
Just a little check ..... you are overclocking the 3D and not the 2D clock speeds?E8600@ 4.25GHz~Thermalright Ultra 120 eXtreme~Foxconn Blackops~4GB Kingston HyperX DDR3 1625 at 1700MHz (8-8-8-24-2N) 1.916v~Asus 9800GTX~18x Pioneer 212 DL SATA DVD-RW~320GB WD SATAII~Antec True Power Trio 650W~Thermaltake Soprano~Vista Ultimate x64 SP2/Win7 RC1
Comment
-
Re: overclock the bfg6200
well for over clocking i mean like i can over clock my memory from 400 to 500mhz but when i go to overclock the core clock it just wont accept and i can move the mouse but cant do anything i also use coolbits 2.0 to overclock
Comment
-
Re: overclock the bfg6200
Try using RivaTuner to enable driver level overclocking, then try to overclock from the Nvidia control panel.
I'm guessing that when you state " ...... but when i go to overclock the core clock it just wont accept and i can move the mouse but cant do anything ....." that the slider will not move, yes?
You should be overclocking the 3D setting so that is not the problem.
Also, what driver are you using?E8600@ 4.25GHz~Thermalright Ultra 120 eXtreme~Foxconn Blackops~4GB Kingston HyperX DDR3 1625 at 1700MHz (8-8-8-24-2N) 1.916v~Asus 9800GTX~18x Pioneer 212 DL SATA DVD-RW~320GB WD SATAII~Antec True Power Trio 650W~Thermaltake Soprano~Vista Ultimate x64 SP2/Win7 RC1
Comment
-
Re: overclock the bfg6200
well im using the newest drivers for nvidia plus its always been like this with any drivers its when i go to over clock the core clock i do like 375 to 378 and it will just puse it stays like that for ever so i have to re start plus im fine with overclocking memory but i can only go up 115mhz before it says the satting you chose are to high turn them down
Comment
-
Re: overclock the bfg6200
What result do you get when you use Nvidia control panel "Detect Optimal Settings"E8600@ 4.25GHz~Thermalright Ultra 120 eXtreme~Foxconn Blackops~4GB Kingston HyperX DDR3 1625 at 1700MHz (8-8-8-24-2N) 1.916v~Asus 9800GTX~18x Pioneer 212 DL SATA DVD-RW~320GB WD SATAII~Antec True Power Trio 650W~Thermaltake Soprano~Vista Ultimate x64 SP2/Win7 RC1
Comment
-
Re: overclock the bfg6200
This is good, it means that you can overclock the core to 405 from 375. This now leads to another avenue, the programme you are using to oc, if the card clocks to 405 with detect optimal settings the problem must lie elsewhere, e.g. Coolbits or the way you are using it.
Personally I enable driver level overclocking through RivaTuner and adjust clock frequencies via the Nvidia control panel, isn't Coolbits the one with the power user option? (been a while since I used it)
My age ....... lets just say I've got 30 years on you
EDIT: What output is your psu? Also, after using detect optimal frequencies can you move the slider anymore than 405 on the core clock?Last edited by ANZAC_ELITE; 01-09-2006, 09:32 PM.E8600@ 4.25GHz~Thermalright Ultra 120 eXtreme~Foxconn Blackops~4GB Kingston HyperX DDR3 1625 at 1700MHz (8-8-8-24-2N) 1.916v~Asus 9800GTX~18x Pioneer 212 DL SATA DVD-RW~320GB WD SATAII~Antec True Power Trio 650W~Thermaltake Soprano~Vista Ultimate x64 SP2/Win7 RC1
Comment
-
Re: overclock the bfg6200
Originally posted by zaqwsxwell for over clocking i mean like i can over clock my memory from 400 to 500mhz but when i go to overclock the core clock it just wont accept and i can move the mouse but cant do anything i also use coolbits 2.0 to overclock
My xpertVision one (pictured in this thread's 2nd post) had it's RAM stock at 500mhz.
Comment
Comment