About what temp should I have the alarm set to? There don't seem to be any guidelines for this. I have it set to 56C and it goes off when running benchmarks. Is it OK to have it set to 60C?
Announcement
Collapse
No announcement yet.
What temp [merged threads]
Collapse
X
-
After getting the OC dialed in as best I could I ran Prime95. After a llittle more tweaking to get rid if errors I let it run for a while and the temperatures started rising above 56C. I pulled it out from under the desk and took the side cover off and temps dropped 10C. I think I need a case fan...:wow:
The case I have is a cheapy "mom 'n pop chinese computer store" type, but it does have grills in the front and back and where an intake and exhaust fan can be added. Is this a standard size that many generic cases have, and if so what size fan would fit in there? The round grill area is about 80mm across with 4 holes for screws..:shrug:
Would this be for an 80mm fan? It's about the same size as the one in my Arrow 500W PSU.
Comment
-
Firstly full hardware details would help and secondly a pic of the case would help even more plus thirdly a room temp durin' these full load temps would help even more than that but if the CPU temp drops that much with the side off then ya do have a case airflow prob though us knownin' exactly what the case is (refer back to 2nd part). A front intake fan would help a lot (remember that the PSU already exhausts hot air) but if ya add an exhaust fan to the back then ya likely goin' to have to add a side AGP/PCI intake fan to keep the airflow balanced.
Comment
-
this is the info i receive from asusprobe
CPU=34C=full load
MB=25C=full load
cpu fan peaks 6490rpm
powerfan dual enermax 465watt peaks at 2311rpm
chasis fan peaks 1906rpm
+ 12V =12.608
+ 5V = peak 4.972
+ 3.3V =3.376
Vcore =1.808
i think i will reformat HDD see if corrects the mem wiggo.
i took out the 400ddr and put the more realistic 2700 infineon in. single channel. my post with the bios settings are in the overclock index. if you could take a look i would appreciate it. to try an help me sus a stable 133bus first. i tried looking into this mem.
I know that it is unbuffered 512ddr, however all the settings are indexed into an annoying PDF file. the settings don't look clear.
Infineon Technologies
Thanks folks!!:)
Comment
Comment