Hi everyone,
first thanks for this place, it's wonderful to see how much people can be passionate by their hardware.
Secondly, excuse me for my english i'm a french baguette and i haven't studied english enough to write it perfectly.
Now here's the problem i've a X58A-UD3R V2.0 (FB Bios) paired with a x5650 OC @4Ghz / QPI=1.36; BCLK=183mHZ; cpuV=1.28 with HT on
i want to update bios because i want to use VT-D technology, only Fh1 bios from Gigabyte Techs support this features.
So i flashed Fh1 Bios through @Bios (i know it's bad), flash was ok and my system boot with any problem but i can't overclock anymore every option i touch make the system unstable and dont boot (like simply decrease ram freq make the system unstable).
i tried other bios, they do same thing no overclock.
I can overclocking ONLY with FB Bios
thank you for your help
first thanks for this place, it's wonderful to see how much people can be passionate by their hardware.
Secondly, excuse me for my english i'm a french baguette and i haven't studied english enough to write it perfectly.
Now here's the problem i've a X58A-UD3R V2.0 (FB Bios) paired with a x5650 OC @4Ghz / QPI=1.36; BCLK=183mHZ; cpuV=1.28 with HT on
i want to update bios because i want to use VT-D technology, only Fh1 bios from Gigabyte Techs support this features.
So i flashed Fh1 Bios through @Bios (i know it's bad), flash was ok and my system boot with any problem but i can't overclock anymore every option i touch make the system unstable and dont boot (like simply decrease ram freq make the system unstable).
i tried other bios, they do same thing no overclock.
I can overclocking ONLY with FB Bios
thank you for your help
Comment