Ud3p & e8400

[kpo6969]

Re: Ud3p & e8400

Nice n Stable Tyreman, good tweaking!


Good luck setting things up Kpo6969, let us know how you get along

http://i239.photobucket.com/albums/ff305/kpo6969/371oc.png

[Tyreman]

Re: Ud3p & e8400



Thanks and heres a second run just fo S***s & Giggles

[Tyreman]

Re: Ud3p & e8400

Ram changed updated settings


MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............Auto
CPU Clock Ratio ..........................9x
Fine CPU Clock Ratio.....................0.0
CPU Frequency ........................... 4.44mhz
Clock Chip Control
CPU Host Clock Control..................Enabled
CPU Host Frequency (Mhz) ............444
PCI Express Frequency (Mhz) .....100 lock
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................800 default
PCI Express Clock Drive................900 default
CPU Clock Skew (ps)....................0
MCH Clock Skew (ps)...................0
DRAM Performance Control
Performance Enhance......................Standard
Extreme Memory Profile (X.M.P.).....Disabled
(G)MCH Frequency Latch............... 400
System Memory Multiplier(SPD).......2.00D “D” Strap is for 400FSB
Memory Frequency (Mhz) ..............800 Running 1:1 @ 888mhz
DRAM Timing Table .......................Manual

Standard Timing Control
CAS Latency Time...............5
tRCD ................................5
tRP'...................................5 now 4
tRAS.................................15 now 12
Advanced Timing Control
tRRD..........................................auto
tWTR..........................................auto
tWR............................................aut o
tRFC...........................................aut o
tRTP............................................au to
Command Rate (CMD) .................2 T
Driving Strength Profiles
Driving Strength Channels A&B......auto

Channel A
Static tRead Value..........................9
tRD Phase0 Adjustment...................auto
tRD Phase1 Adjustment...................auto
tRD Phase2 Adjustment ..................auto
tRD Phase3 Adjustment...................auto
Trd2rd(Different Rank)....................auto
Twr2wr(Different Rank)...................auto
Twr2rd(Different Rank)................... auto
Trd2wr(Same/Diff Rank)..................auto
Dimm1 Clock Skew Control...............auto
Dimm2 Clock Skew Control...............auto
DDR Write Training…………………………….auto

Channel B
Static tRead Value..........................9

tRD Phase0 Adjustment...................auto
tRD Phase1 Adjustment...................auto
tRD Phase2 Adjustment ..................auto
tRD Phase3 Adjustment...................auto
Trd2rd(Different Rank)....................auto
Twr2wr(Different Rank)...................auto
Twr2rd(Different Rank)...................auto
Trd2wr(Same/Diff Rank).................auto
Dimm1 Clock Skew Control...............auto
Dimm2 Clock Skew Control...............auto
DDR Write Training……………………………auto

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
Load Line…………….Disabled
CPU Vcore….……….....1.25625v

CPU Termination….....1.200v
CPU PLL…………………...1.500V
CPU Reference.…………Auto sets this well

MCH/ICH
MCH Core…………….....1.260V stability and boot
MCH Reference….…….Auto
MCH/DRAM Ref.…......0.970
ICH I/O………………......1.500V
ICH Core…………...…….1.200

DRAM
DRAM Voltage …….......1.940v
DRAM Termination….....0.970v
Channel A Reference…..0.970v
Channel B Reference…..0.970v

Advanced Settings
Limit CPUID Max. to 3....................disabled
No-Execute Memory Protect.............enabled
CPU Enhanced Halt (C1E)................enabled throttles according to load
C2/C2E State Support.....................disabled
x C4/C4E State Support...................disabled
CPU Thermal Monitor2(TM2).............enabled
CPU EIST Function..........................disabled

Primed 24 hours and change
linx etc
Bios F-10

Last edited by Tyreman; Oct 15/11 updated template/ different ram.

Share

[profJim]

Re: Ud3p & e8400

CPU Clock Ratio ..........................9x
Fine CPU Clock Ratio.....................0.0
CPU Frequency ........................... 4.44mhz
Clock Chip Control
CPU Host Clock Control..................Enabled
CPU Host Frequency (Mhz) ............444

CPU Frequency should read 3996MHz (9 x 444).
I'm running 8GB of HyperX T1 memory at 874MHz with 4-4-4-10 memory timings in my P35-DS3L system.
Your system might be stable with 4-5-4-12 or similar memory timings with your current setup.
You can click on the Kingston link in my signature to see exactly which memory I'm using.

Thanks for posting your current settings, it will help thread viewers see what's possible with their systems.
Naturally, their mileage may vary.

[Tyreman]

Re: Ud3p & e8400

CPU Frequency should read 3996MHz (9 x 444).
I'm running 8GB of HyperX T1 memory at 874MHz with 4-4-4-10 memory timings in my P35-DS3L system.
Your system might be stable with 4-5-4-12 or similar memory timings with your current setup.
You can click on the Kingston link in my signature to see exactly which memory I'm using.

Thanks for posting your current settings, it will help thread viewers see what's possible with their systems.
Naturally, their mileage may vary.

Yes thats correct about the cpu speed just a hair under the 4000Mhz
My ram is Kingston Part #KHX6400D2LLK2/4G 4GB PC2-6400 CL4 2x2gb kit

[Tyreman]

Re: Ud3p & e8400

Here is new template working with 2 different ram brands
As I have found the original mushkin redlines XP-2 8000's were not as well suited to this combo.
They additionally had higher voltage required.(2.0-2.1)
New results below stability is rock solid on each

The Mushkin ram used now is part #996557 5-5-5-18 1.8v per sticker
I have left these Mushkin Silverlines in at present

The Kingston Hyper X part #KHX6400D2LLK2/4G were tested as well

MB Intelligent Tweaker (M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio .......................:9
Fine CPU Clock Ratio...................:.0
CPU Frequency .........................:4.45(445x9=4005Mhz)or4.0 5GHz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............:[Enabled]
CPU Host Frequency (Mhz) ............:445 MHz
PCI Express Frequency (Mhz) .........:100 Lock

C.I.A.2 ..............................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive.......................:<<< 800
PCI Express Clock Drive...............:<<< 900
CPU Clock Skew (ps)...................:<<<
MCH Clock Skew (ps)...................:<<<


DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
MCH Frequency Latch...............:400
System Memory Multiplier ..............:2.00D strap
Memory Frequency (Mhz) ..............:800 Running 890 1:1 ratio
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time...5(kingston hyper X) 5(mushkin silverline)
tRCD ..............5(kingston hyper X) 5(mushkin silverline)
tRP'...............4(kingston hyper X) 5(mushkin silverline)
tRAS...............12(kingston hyper X) 14(mushkin silverline)



Advanced Timing Control
tRRD...................................Auto
tWTR...................................Auto
tWR....................................Auto
tRFC...................................Auto
tRTP...................................Auto
Command Rate (CMD) ....................2T

Driving Strength Profiles
Driving Strength ......................Auto

Channel A
Static tRead Value....................:9
tRD Phase0 Adjustment................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment.................:Auto
tRD Phase2 Adjustment ...............:Auto
tRD Phase3 Adjustment................:Auto
Trd2rd(Different Rank)................:Auto
Twr2wr(Different Rank)................:Auto
Twr2rd(Different Rank)................:Auto
Trd2wr(Same/Diff Rank)................:Auto
Dimm1 Clock Skew Control..............:Auto
Dimm2 Clock Skew Control..............:Auto

Channel B
Static tRead Value....................:9
tRD Phase0 Adjustment.................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment.................:Auto
tRD Phase2 Adjustment ................:Auto
tRD Phase3 Adjustment.................:Auto
Trd2rd (Different Rank)...............:Auto
Twr2wr (Different Rank)...............:Auto
Twr2rd (Different Rank)...............:Auto
Trd2wr (Same/Diff Rank)...............:Auto
Dimm1 Clock Skew Control..............:Auto
Dimm2 Clock Skew Control..............:Auto

Motherboard Voltage Control

CPU

Load Line…………………………….Disabled
CPU vcore……………………………1.25625
CPU termination………….1.20
CPU PLL……………………………..1.50
CPU Reference……………..Auto

MCH/ICH
MCH Core…………………………….Northbridge 1.26
MCH Reference……………..Auto
MCH/DRAM Reference….0.970(kingston hyper X)0.900(mushkin silverline)
ICH/IO………………………………..1.50
ICH Core…………………………..1.20

DRAM

DRAM Voltage………………..1.940(kingston hyper X)1.800(mushkin silverline)
DRAM Termination……..0.970(kingston hyper X)0.900(mushkin silverline)
Channel A reference.0.970(kingston hyper X)0.900(mushkin silverline)
Channel B Reference.0.970(kingston hyper X)0.900(mushkin silverline)



Advanced Settings
Limit CPUID Max. to 3.................: [Disabled]
No-Execute Memory Protect.............: [Enabled]
CPU Enhanced Halt (C1E)...............: [Enabled]throttles according to load
C2/C2E State Support..................: [Disabled]
x C4/C4E State Support................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.....................: [Enabled]
Virtualization Technology.............: [Disabled] enabled if you use Vmware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect...............Enabled
Other Settings:
HPET Support Enabled
HPET 32 or 64 Bit…64 Bit
On Board Serial Port 1 Disabled
On Board Parallel Port 1 Disabled
On Board HW 1394 Disabled
Smart Lan press Enter Not used
On Board H/W Lan 1 Enabled
On Board H/W Lan 2 Disabled
On Board Lan Boot Rom Disabled
Green Lan Disabled
Sata Port 0-3 native Mode Enabled
Sata Raid/AHCI Disabled
All USB 1.1/2.0 Enabled
USB Mouse Function Enabled
USB Keyboard Function Enabled
Drive A floppy 1.44 Disabled
Azalia codec Enabled
Floppy 3 mode Support Disabled
HDD Smart Disabled
Delay for HDD 0 sec
Initial Display 1ST PEG Important
Password Check not used
First Boot device OS HDD make sure correct
2nd Boot Device disabled
3rd Boot device disabled
CPU warning temp 70/158f
CPU fan fail warning enabled
Power fan fail disabled
System fan fail disabled
CPU smart fan control PWM
PME wake up event Disabled
Pwr on by ring Disabled
Pwr on by Mouse Disabled
Pwr on by Keyboard Disabled
Use F12 to call up on boot any device you want
Bios F-10