Re: EP45-UD3P / Q9650 4.0 OC if possible???
Chike, and all thanks for the info. I had to shut down RIG to clean filters, fans, etc. (been running 6 days non stop). I put in new RAM to check if it was good (G.Skill F2-9600CL5D-4GBPI / 8GB's) - passed Prime95 Blend 12 hrs. first try - 2.40B 1080 - Back to old RAM - Man, I had vtt all the way up to 1.36. The most I was able to get out of any test was 1 to 3 hrs. I was starting think I have a bad RAM module. I'll put old RAM back in and continue testing. One of my best P95 Blend passes:Vcore 1.35(1.33)LLC Enabled, vtt 1.30, MCH Core 1.26, CPU Ref. .715(.778), MCH Ref. .800(.863), DRAM 2.12. ERROR:worker #4, test #11, 2100, M34230145, 2048K, 444 test, 8hrs. 38 mins. I tried every setting possible - around these with no luck. I'd like to get my settings back around these if possible. I've never used clock skews before - may need help with this. Man, I'm sorry to be a pain (walk me through it) - Can I get settings to start with and do a test and report back procedure??? I'm going to study all the info you all(Okie) gave me - maybe something will click. THANKS AGAIN
Chike, and all thanks for the info. I had to shut down RIG to clean filters, fans, etc. (been running 6 days non stop). I put in new RAM to check if it was good (G.Skill F2-9600CL5D-4GBPI / 8GB's) - passed Prime95 Blend 12 hrs. first try - 2.40B 1080 - Back to old RAM - Man, I had vtt all the way up to 1.36. The most I was able to get out of any test was 1 to 3 hrs. I was starting think I have a bad RAM module. I'll put old RAM back in and continue testing. One of my best P95 Blend passes:Vcore 1.35(1.33)LLC Enabled, vtt 1.30, MCH Core 1.26, CPU Ref. .715(.778), MCH Ref. .800(.863), DRAM 2.12. ERROR:worker #4, test #11, 2100, M34230145, 2048K, 444 test, 8hrs. 38 mins. I tried every setting possible - around these with no luck. I'd like to get my settings back around these if possible. I've never used clock skews before - may need help with this. Man, I'm sorry to be a pain (walk me through it) - Can I get settings to start with and do a test and report back procedure??? I'm going to study all the info you all(Okie) gave me - maybe something will click. THANKS AGAIN
Comment