If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There is realy no point changing anything unless there is some gain from it.
I can't compare to Sandra as I don't use it, if you run I'll be able to compare.
It's very possible you can lower Static tRead Value to 7 on both channels for better performance.
Hey Chike, sorry m8 but I am not sure which setting Static tRead is?
Hi Lsdmeasap, I have changed tRRD to 5 and will torture test it now, thanks guys ;o)
GA-P35C-DS3R
Intel E6750 @ 3.4GHz 425MHz bus
Mem x 3.2 @ 1360 MHz DDR3 OCZ3P1333LV4GK 6-7-7-18 tRFC 66 tRD 7
FSB +0.1V
DDR +0.3V
MCH +0.2V
Vcore 1.4V
Gainward HD4750 golden sample
OCZ SXS 600W
Have you any more things that I could change in the memory timings?
I may like to try the CPU next, I was hitting the wall @ 400MHz it wouldn't even post at this!
GA-P35C-DS3R
Intel E6750 @ 3.4GHz 425MHz bus
Mem x 3.2 @ 1360 MHz DDR3 OCZ3P1333LV4GK 6-7-7-18 tRFC 66 tRD 7
FSB +0.1V
DDR +0.3V
MCH +0.2V
Vcore 1.4V
Gainward HD4750 golden sample
OCZ SXS 600W
Strange the CPU and the board should have noproblem to do 400+ MHz.
If you can get 428MHz to work and memory multiplier 3.2 it should be able to do CAS 6.
My MaxxMem results for DDR-1066 @ 400MHz FSB 5-5-5-15 tRD 7 tRFC 56 (equal to 84 at 1600)
Copy 8917
Read 8422
Write 8307
Laetncy 61.0
Obviousely your latency is much better and probably contribute to the better read as well, the differences in write may be due to the diffferences in chipsets.
Memory frequency is not very important. I am sure you will have overall and even better memory performance with higher FSB, even if you have to compromise memory frequency.
The advantage of high speed memory id not so much it's speed but more the flexability it gives.
Have had to return the tRD to 8 as 7 gave me memtest errors. MaxxMem results have dropped a little but at least it is stable now.
Will try to raise FSB later
GA-P35C-DS3R
Intel E6750 @ 3.4GHz 425MHz bus
Mem x 3.2 @ 1360 MHz DDR3 OCZ3P1333LV4GK 6-7-7-18 tRFC 66 tRD 7
FSB +0.1V
DDR +0.3V
MCH +0.2V
Vcore 1.4V
Gainward HD4750 golden sample
OCZ SXS 600W
Comment