Announcement

Collapse
No announcement yet.

GA-EP45-UD3R G11 Wont Work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GA-EP45-UD3R G11 Wont Work

    System Specs
    Intel Core 2 Quad Q6600 @ 400x8- 3.2ghz
    XFX GTX 260 868mb 192 Core
    2x2GB G-skill PC6400 DDR2 800
    Seagate Barracuda 7200.12 ST3500418AS
    GIGABYTE GA-EP45-UD3R LGA 775 (rev. 1.0)
    TX750w Corsair PSU
    Antec 900 Case
    1680x1050 Acer X223W 22''

    Logitech S-220 Speakers
    Windows 7 x64


    The issue I have is I was using the F3 BIOS and my G11 would work during boot up (to go safe mode / format) but since I installed my F11 and I have found my keyboard (Logitech G11 Keyboard) no longer works till Windows is booted up.

    Allow me to explain that better.
    I can access my BIOS but after that screen my keyboard dies till boot up is finished. That means I can't format/safe mode/boot from disc without another keyboard.


    There a fix for this other then using a second keyboard? Its not a super major issue but currently its annoying as I need to get into safe mode. I know how to bypass it to format though through the boot options.
    Last edited by Twist86; 01-05-2010, 01:31 PM.

  • #2
    Re: GA-EP45-UD3R G11 Wont Work

    If you have a PS/2 keyboard or a PS/2 adapter to get you into the bios and make sure you turn on USB keyboard support. If you get into the bios and find that it is turned on then you will have to use the other keyboard or adapter untill new bios comes out with fix.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator




    Comment


    • #3
      Re: GA-EP45-UD3R G11 Wont Work

      try clear cmos or enable usb option in bios or try to revert old bios version

      Comment


      • #4
        Re: GA-EP45-UD3R G11 Wont Work

        That worked thanks.....I dunno why F11 disabled USB by default but it fixed the issue.

        Comment


        • #5
          Re: GA-EP45-UD3R G11 Wont Work

          Good to hear you got it working. What got it working clearing the cmos or the adapter? If it was clearing the cmos, did you load default settings after flash. If not that could have been why. One time with my board some how usb keyboard got disabled but was still able to enter bios holding down the del key right after powering on with my G15 keyboard.
          Main Rig
          Gigabyte z87x-OC
          Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
          G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
          Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
          Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
          HiS ATI HD 6950
          Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
          Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
          Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
          Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
          CORSAIR CMPSU-850TX PSU
          Swiftech MCP655-B Pump
          EK Supremacy Cpu Block
          Swiftech Mcres Micro Rev 2 Reservoir
          Black Ice GTX Xtreme 360 Radiator




          Comment


          • #6
            Re: GA-EP45-UD3R G11 Wont Work

            USB was disabled after the BIOS update...prior it was enabled by default on my board so I never had issues with it.

            Comment


            • #7
              Re: GA-EP45-UD3R G11 Wont Work

              It may have been changed in the current release to default to off. This is because in some cases having the legacy USB options like KB, Mouse and storage (needed to boot to USB) can cause instability when over clocking or even on some stock systems, depending on HW used.

              Glad you got it sorted in the end.
              Coolermaster CM 690 II advance Case
              Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
              P55A-UD4 v2.0 @ F14
              Core i5 760 @ 20 x 201, 4.02GHz
              TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
              2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
              2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
              Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
              Corsair X32 200MB/s Read & 100MB/s Write
              WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
              Samsung F3 500GB Backup/Images
              Noctua 1300RPM 19dB case fan (rear extraction)
              3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
              Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

              Comment

              Working...
              X