Hey
This build is working better than the other one which I'm still trying to fix.
I want the i7 to be around 4GHZ+
The current settings I'm using atm are below, there's a lot of new setting which i'm not familar with since it a load of new settings, which is also why most of them are on 'Auto'
The below settings work on normal use (been on for 25hrs) but fails prime after 5hours however I could fix the problem by increasing the Vcore but I'm not sure whether other voltages could improve the stability.
Thanks
Edit:
My specs are:
X58A-UD7
i7 920 D0
6GB Corsair Dominator GT PC3-15000C7
Nvidia GTX260 (will be changing to another 260 soon - got my reasons :P)
Corsair TX950
Windows 7 x64
This build is working better than the other one which I'm still trying to fix.
I want the i7 to be around 4GHZ+
The current settings I'm using atm are below, there's a lot of new setting which i'm not familar with since it a load of new settings, which is also why most of them are on 'Auto'
The below settings work on normal use (been on for 25hrs) but fails prime after 5hours however I could fix the problem by increasing the Vcore but I'm not sure whether other voltages could improve the stability.
Code:
Advanced CPU Features: CPU Clock Ratio ................................ [21 ] Intel(R) Turbo Boost Tech ...................... [Enable] CPU Cores Enabled .............................. [All] CPU Multi Threading .............................[Enable] CPU Enhanced Halt (C1E) ........................ [Disable] C3/C6/C7 State Support ......................... [Disable] CPU Thermal Monitor ............................ [Disable] CPU EIST Function .............................. [Disable] Virtualization Technology ...................... [Enable] Bi-Directional PROCHOT ......................... [Enable] Uncore & QPI Features: QPI Link Speed ..............................[6.91] Uncore Frequency ............................[3840] Isonchronous Frequency ......................[Enable] Standard Clock Control: Base Clock (BCLK) Control .......................... [Enable] BCLK Frequency (MHz) ................................[192] PCI Express Frequency (MHz) ........................ [AUTO] C.I.A.2........................................... .. [-] Advanced Clock Control: CPU Clock Drive ..............................[800] PCI Express Clock Drive ................... [900] CPU Clock Skew ............................. [0] IOH Clock Skew ............................. [0] Advanced DRAM Features: Performance Enhance ...................... [Turbo] Extreme Memory Profile (X.M.P) ........... [Disable] System Memory Multiplier (SPD) ........... [ 10] DRAM Timing Selectable (SPD) ............. [Quick] Channel A + B + C Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ......................[7] tRCD ..................................[8] tRP ...................................[7] tRAS ..................................[20] CR.....................................[AUTO] B2B.....................................[-] Advanced Voltage Control: CPU Intel Core i7 920 D0 Stepping Load Line Calibration ................. [Standard] CPU Vcore ..............................[1.35000] QPI/VTT Voltage 1.150v .................[AUTO] CPU PLL 1.800v .........................[AUTO] PCIE 1.500v ...........................[AUTO] QPI PLL 1.100v ........................[AUTO] IOH Core 1.100v .......................[AUTO] ICH I/O 1.500v ........................[AUTO] ICH Core 1.1v .........................[AUTO] DRAM DRAM Voltage 1.500v .............. [1.64] DRAM Termination 0.750v.......... [AUTO] Ch-A Data VRef. 0.750v ...........[AUTO] Ch-B Data VRef. 0.750v ...........[AUTO] Ch-C Data VRef. 0.750v ...........[AUTO] Ch-A Address VRef. 0.750v ........[AUTO] Ch-B Address VRef. 0.750v ........[AUTO] Ch-C Address VRef. 0.750v ........[AUTO]
Edit:
My specs are:
X58A-UD7
i7 920 D0
6GB Corsair Dominator GT PC3-15000C7
Nvidia GTX260 (will be changing to another 260 soon - got my reasons :P)
Corsair TX950
Windows 7 x64
Comment