Re: I7 on X58A-UD7 help
BSoD after 12hours.
I'll try tweaking the voltages again after I've changed LLC to level 1.
Seeing as I used to use 1.35 Vcore with LLC disabled, would that mean I could use less Vcore if LLC is enabled due to less Vdroop?
Edit:...
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
Leungwk01
Junior Member
Last Activity: 09-24-2017, 07:16 AM
Joined: 11-25-2008
Location:
-
Last edited by Leungwk01; 12-10-2009, 10:30 AM.
-
Re: I7 on X58A-UD7 help
I'm sure its 18x.
Can't really remember (using nvidia gpu though) but I did some changes which I'll post later. And its running prime 7hrs and going.
On the 'Load Line Calibration' settings its fine to leave is as disabled or would you suggest...
Leave a comment:
-
Re: I7 on X58A-UD7 help
Prime ran for 2hr before getting the BSoD. Code was 0x0000003b..
So I'm guessing this is related to RAM/driver problem?
Raising the Vcore don't seem to be the problem since I raised it a bit more to test and it BSoD a bit quicker.
Leave a comment:
-
Re: I7 on X58A-UD7 help
The BIOS code which I got wasn't the one you stated however some were but I raised the Vcore abit and another code was prompt.
I'll post the code when I used the settings above.
Also isn't it recommended to have QPI/VTT at 1.35 max?
Leave a comment:
-
Re: I7 on X58A-UD7 help
X58A-UD7
i7 920 D0
6GB Corsair Dominator GT PC3-15000C7
http://www.overclockers.co.uk/showpr...odid=MY-200-CS
Nvidia GTX260 (will be changing to another 260 soon - got my reasons :P)
Corsair TX950
Advanced...Last edited by Leungwk01; 12-06-2009, 01:31 PM.
Leave a comment:
-
Re: I7 on X58A-UD7 help
Got blue screen on 1.3555
Will slowly raise and update tomorrow since its getting late here. (technically early - GMT)
Leave a comment:
-
I7 on X58A-UD7 help
Hey
This build is working better than the other one which I'm still trying to fix.
I want the i7 to be around 4GHZ+
The current settings I'm using atm are below, there's a lot of new setting which i'm not familar with since it a load of new settings, which is also why most of them...Last edited by Leungwk01; 12-05-2009, 08:26 PM.
-
Re: Help on Computer/Partly Overclocking
So the double boot is normal even when the computer is fully stable? I'll change to 4GB and 2.00. I wont be able to update since I'm using the GPU on my new build so the new GPU will be here on sat/mon which is when I'll start changing everything...
Leave a comment:
-
Re: Help on Computer/Partly Overclocking
I don't have 2.66 as well. I've tried 2.5 before with the same settings and it still had the problem but I've not tried 2.00 yet. However when I use 2.00 it does the weird boot thing which I'm mentioned before in my old thread. Power button off...Last edited by Leungwk01; 12-03-2009, 06:30 PM.
Leave a comment:
-
Re: Help on Computer/Partly Overclocking
I'll try the settings when I re-build it.
(I took it apart to use the case for my I7 build which I will create a new thread on over-clocking that - However I've done a bit on that atm)
I'll try a bit more on the Vcore as the...Last edited by Leungwk01; 12-03-2009, 10:34 AM.
Leave a comment:
No activity results to display
Show More
Leave a comment: