Excuse me, i have some questions.
I just overclocked my rig and 4.2ghz +HT ON 21x200 its very stable, as i have passed 8 hours each test on OCCT small/medium/large, Linx 50/50 passes @ full memory.
I am confused at the moment if its okay to enable some of the cpu features?
At the moment this are the settings:
Would it be a good idea to start Enabling since i am already very stable. Or it's better to keep them disabled?
I heard from a friend its good to enable all after having a stable setting.
Also i wanted to run the Gigabyte Energy Saver 6 program as well, will it cause any stability issue's ? same with all of those cpu features..
Thanks
I just overclocked my rig and 4.2ghz +HT ON 21x200 its very stable, as i have passed 8 hours each test on OCCT small/medium/large, Linx 50/50 passes @ full memory.
I am confused at the moment if its okay to enable some of the cpu features?
At the moment this are the settings:
Intel(R) Turbo Boost Techn. [Enabled]
CPU Cores Enabled [All]
CPU Multi-Threading [Enabled]
CPU Enhanced Halt (C1E) [Disabled]
C3/C6/C7 State Support [Disabled]
CPU Thermal Monitor [Enabled]
CPU EIST Function [Disabled]
Virtualization Technology [Disabled]
Bi-Directional PROCHOT [Disabled]
CPU Cores Enabled [All]
CPU Multi-Threading [Enabled]
CPU Enhanced Halt (C1E) [Disabled]
C3/C6/C7 State Support [Disabled]
CPU Thermal Monitor [Enabled]
CPU EIST Function [Disabled]
Virtualization Technology [Disabled]
Bi-Directional PROCHOT [Disabled]
I heard from a friend its good to enable all after having a stable setting.
Also i wanted to run the Gigabyte Energy Saver 6 program as well, will it cause any stability issue's ? same with all of those cpu features..
Thanks
Comment