Re: P67A-UD5-B3 Sleep issue

Update:

Newest F6 Bios works!

Using all settings from F2 and Sleep works perfect.
Only minor difference is:
-I could use F2 with auto voltage (1.35v) and have C1E + EIST working.
-With F6, auto voltage is 1.22v...

Re: P67A-UD5-B3 Sleep issue

Hey LSD,

Thanks for the reply.
Yes, only Beta I tried was F3C... I'll give some of the other Betas a go.

Cheers!

Re: P67A-UD5-B3 Sleep issue

Quick update:

I have tried BIOS F2, F3, F3C, F4, F5...
The only BIOS where sleep works OK is F2.

Every other BIOS version I have tried messes up Sleep when OC'd. Either reboot loops, or blank screen and no keyboard. I just gave...

Re: P67A-UD5-B3 Sleep issue

Hey wazza. Holy post count man, you've been busy :)

Stock with Pll OverV on = Sleep OK

I wasn't sure if it was going to work...
After reading a whole lot more on this, the issue is supposedly that with OverV on "Sleep/Hibernate...

Re: P67A-UD5-B3 Sleep issue

Hi D,

Thanks a lot for the suggestions.

In my case, I doubt it is the problem because RAM is rated 1866 @1.5v and that is what I have been running it at.
I did not optimize mem timings, I just let XMP do it's job for now (manual...

Re: P67A-UD5-B3 Sleep issue

Hey, no worries. I did not take it like that at all + your input is always appreciated.

See you around the forum :)

Re: P67A-UD5-B3 Sleep issue

Hi LSD, long time man :)

Thanks for the info, I had no idea this was a known issue... still new to this board.

I'll just wait for a new BIOS for my 24/7 OC. This issue only affects sleep above 44x, but the board is otherwise completely...

Hi all,

Just got the board, I like it so far but am limited by an S3 sleep issue for my 24/7 OC.
So far, everything points to "CPU PLL Overvoltage" setting in BIOS not sticking on S3 resume.

For example, I have tested "stable" (1 hour Prime...

Re: Dynamic Energy Saver still shows up on POST after uninstall

Check post #5 here (this worked for me, although it is irrational...):
http://forums.tweaktown.com/f69/dpc-...x58-ud5-30547/

And this thread:
http://forums.tweaktown.com/f69/ga-...

Re: Gigabyte Latest BIOS




Stock:
Normal = 1.24v BIOS, 1.20 load, 1.06 idle

For my OC:
Normal + DVID (+0.1) = 1.34v BIOS, 1.30 load, 1.16 idle...