POST EX58 Series OC's & PIC's HERE

[C3D76]

Re: POST EX58 Series OC's & PIC's HERE

Hi all.

Wow, nice chip Prasrig. 4.12 Ghz with 1.25v and HT on ^^!

Here is my max with this CPU (1.55v, 1.35vtt), and pics of my rig in sig

Was using Patriot 1600 c9 at the time...


Screenshots of my settings at diff OC's:

http://photoshare.shaw.ca/messages/viewthumb/17734082332-1236219047-24700/parm/page/1/15/

[roller11]

Re: POST EX58 Series OC's & PIC's HERE

C3D76,
Excellent work my friend!
One suggestion...when you get up to those high CPU clock, some chips like extra
Vtt, you may get higher if you run it up to around 1.46 or so.

[prasrig]

Re: POST EX58 Series OC's & PIC's HERE

@C3D76

Im IMPRESSED MAN!!!


Good Work KEEP IT UP
did u take part in the GOOC2009
If u will ,how can i tell

♥♥♥♥♥

[prasrig]

Re: POST EX58 Series OC's & PIC's HERE

there r s0many Users of UD5 & extreme and all the ex58 users
Just get it started here guys

♥♥♥♥♥

[wylker]

Re: POST EX58 Series OC's & PIC's HERE

This thread makes me angry =/

[prasrig]

Re: POST EX58 Series OC's & PIC's HERE

Any reason for that U

Express urself

♥♥♥♥♥

[wylker]

Re: POST EX58 Series OC's & PIC's HERE

Any reason for that U

Express urself

♥♥♥♥♥

Just having a frustrating time getting a higher OC to work on my EX58 =/

lsd is trying to help it's just frustrating

[Lsdmeasap]

Re: POST EX58 Series OC's & PIC's HERE

Bout to drop you some settings now wylker, I am just trying to get some things done for the old lady before she shoots me!

[prasrig]

Re: POST EX58 Series OC's & PIC's HERE

How much u want to overclock Only 200BCLK na

I will provide a saved setting for U
First tell me ur config pl..

♥♥♥♥♥

[prasrig]

Re: POST EX58 Series OC's & PIC's HERE

Overclocking is a work of concentration

U should start with a little push it for little more more & more (there u get !!!)
If u get frustrated it will never workout ,it was the same with me
And im now going for 210 & above
>>>>>>>>>>>>>>>>I get a Blue screen

♥♥♥♥♥

[Lsdmeasap]

Re: POST EX58 Series OC's & PIC's HERE

I am not even sure he has told us what board he has yet, not that it matter much though.

Do keep in mind if you two have the same board and you want to give him a profile to use you should both be using the same BIOS version.

I use UD4P and can provide anyone with BIOS profiles as well (Just incase anyone would like one)

@Prasig

Here is my findings on many BSOD's over the past month (QPI/Vtt and Vcore codes are almost 100% always correct) >>
0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
0X00000101 << Not enough Vcore Voltage

** And Guys **

Do keep in mind, more QPI/Vtt is not always the answer!

I find sometimes at 190-200 Blck I need far more QPI/Vtt than I do at 200-210 Blck.

For Example in some tests I was doing yesterday at 190 Blck I had to use 1.375, and a few days before I was using 1.315 for 210 Blck, anymore and it would not boot. Those of course are just examples and do not mean everyone will need a much smaller amount for a much larger Bclk. But I have found it to be true for both i7's I have been using

Ohh, almost forgot here is 210 Blck HT ON with ram @ 1860 Performance Enhance Extreme



CPU-Z Validator 3.0

[prasrig]

Re: POST EX58 Series OC's &amp; PIC's HERE

wylker u should tell what is ur config FIRST ! ! !

The i can or any body can do anything

Today i reached @ 210 BCLK but it took a bit more volts then @200 bclk





@ LSD
Im thinking for the need of an extreme processor with an unlocked m.....
With core i7 920 with greater bclk it needs more volts ...
i experienced the way i7920 responded for little more volts

♥♥♥♥♥

[roller11]

Re: POST EX58 Series OC's &amp; PIC's HERE

I've also found that sometimes the CPU multi matters. For example, my
rig hates anything except 21 multi so I always have turbo enabled. But this
is just something to try, your combo may work just as well with 19 or 20, just need to
experiment. However I've never seen a case where 12-20 resulted in a higher CPU clock than using 21 multi.

[wylker]

Re: POST EX58 Series OC's &amp; PIC's HERE

Hey, sorry I wasn't ignoring this thread, but I have all my specs and settings posted in this thread: http://forums.tweaktown.com/f69/mist...i-speed-31321/

This is on a EX58-UD5.

What is frustrating is that I feel like the settings I've tried SHOULD work. They're just not. My memory seems to work at high clocks, and everyone else with this board/cpu is having good results that I simply can't duplicate.

[prasrig]

Re: POST EX58 Series OC's &amp; PIC's HERE

My setting for @ 206 BCLK

Advanced CPU Features:
CPU Clock Ratio ................................ [20x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Enabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]


Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... (x18)
Isonchronous Frequency ..................[Enabled]


Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... [200]
PCI Express Frequency (MHz) ........... [101]

C.I.A.2 [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]


Advanced DRAM Features:
Performance Enhance ...................... [EXTREME](I never use less than extreme)
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [8x]
DRAM Timing Selectable (SPD) .......... [Expert]


Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... [8]
tRCD ....................................... [8]
tRP ......................................... [8]
tRAS ....................................... [20]
Command Rate (CMD) ................ [1]

Channel B Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... [8]
tRCD ....................................... [8]
tRP ......................................... [8]
tRAS ....................................... [20]
Command Rate (CMD) ................ [1]

Channel C Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... [8]
tRCD ....................................... [8]
tRP ......................................... [8]
tRAS ....................................... [20]
Command Rate (CMD) ................ [1]

##Channel A+B+C Advanced Timing Control##
tRC ........................................ [Auto]
tRRD ....................................... [Auto]
tWTR ...................................... [Auto]
tWR ........................................ [Auto]
tWTP ....................................... [Auto]
tWL ........................................ [Auto]
tRFC ....................................... [Auto]
tRTP ....................................... [Auto]
tFAW ...................................... [Auto]
Round Trip Latency ................... [Auto]



Advanced Voltage Control:

CPU
Load Line Calibration ................. [Enabled](Keep this Always enabled)
CPU Vcore ............................... [1.29..]
QPI/VTT Voltage 1.150v ............ [1.38]
CPU PLL 1.800v ....................... [1.60]

MCH/ICH
PCIE 1.500v ........................... [1.500]
QPI PLL 1.100v ....................... [1.10]
IOH Core 1.100v ..................... [1.10]
ICH I/O 1.500v ....................... [1.50]
ICH Core 1.1v ........................ [1.10]

DRAM
DRAM Voltage 1.500v .............. [1.64]
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]

Thats all I Able to boot and go for benchmarks

♥♥♥♥♥