Uhh hi guys I'm having some trouble OC'ing my E8400... No matter what settings I change the computer won't POST the first time then it'll reboot and the settings will be normal not OC'd ones. I wanted to hit 3.6 but I only went to 3.16 at first and it still didn't work. Are there settings I'm missing or something (I'm sure there are =P). This is on an EP43-DS3L btw with 2x2GB OCZ Reaper HPC DDR2800 in dual channel (if that matters).
Here are my current M.I.T. settings:
Robust Graphics Booster->Auto
CPU Clock Ratio->9X
*****Clock Chip Control*****
>>>Standard Clock Control
CPU Host Clock Control->Enabled
CPU Host Frequency (Mhz)->333
[COLOR=blue ! important][COLOR=blue ! important][COLOR=blue ! important][/COLOR][/COLOR][/COLOR] PCI Express Frequency (Mhz)->100
C.I.A.2->Disabled
>>>Advanced Clock Control
CPU Clock Drive->800mV
PCI Express Clock Drive->800mV
CPU Clock Skew->0ps
MCH Clock Skew->0ps
*****DRAM Performance Control*****
Performance Enhance->Standard
Extreme Memory Profile (X.M.P.)->Auto
(G)MCH Frequency Latch->333 Mhz
System Memory Multiplier (SPD)->2.40B
DRAM Timing Selectable (SPD)->Manual
>>>Standard Timing Control
CAS Latency Time->5
tRCD->5
tRP->5
tRAS->15
>>>Advanced Timing Control
tRRD->3 (Auto)
tWTR->3 (Auto)
tWR->6 (Auto)
tRFC->54 (Auto)
tRTP->3 (Auto)
Command Rate (CMD)->0 (Auto)
*****Mother Board Voltage Control*****
>>>CPU
CPU Vcore->1.22500V
CPU Termination->Auto
CPU PLL->Auto
CPU Reference->Auto
>>>MCH/ICH
MCH Core->Auto
ICH I/O->Auto
>>>DRAM
DRAM Voltage->1.800V
Thanks!
Here are my current M.I.T. settings:
Robust Graphics Booster->Auto
CPU Clock Ratio->9X
*****Clock Chip Control*****
>>>Standard Clock Control
CPU Host Clock Control->Enabled
CPU Host Frequency (Mhz)->333
[COLOR=blue ! important][COLOR=blue ! important][COLOR=blue ! important][/COLOR][/COLOR][/COLOR] PCI Express Frequency (Mhz)->100
C.I.A.2->Disabled
>>>Advanced Clock Control
CPU Clock Drive->800mV
PCI Express Clock Drive->800mV
CPU Clock Skew->0ps
MCH Clock Skew->0ps
*****DRAM Performance Control*****
Performance Enhance->Standard
Extreme Memory Profile (X.M.P.)->Auto
(G)MCH Frequency Latch->333 Mhz
System Memory Multiplier (SPD)->2.40B
DRAM Timing Selectable (SPD)->Manual
>>>Standard Timing Control
CAS Latency Time->5
tRCD->5
tRP->5
tRAS->15
>>>Advanced Timing Control
tRRD->3 (Auto)
tWTR->3 (Auto)
tWR->6 (Auto)
tRFC->54 (Auto)
tRTP->3 (Auto)
Command Rate (CMD)->0 (Auto)
*****Mother Board Voltage Control*****
>>>CPU
CPU Vcore->1.22500V
CPU Termination->Auto
CPU PLL->Auto
CPU Reference->Auto
>>>MCH/ICH
MCH Core->Auto
ICH I/O->Auto
>>>DRAM
DRAM Voltage->1.800V
Thanks!
Comment